Opensuse 13.2 dualboot lässt sich nicht herunterfahren

Manu1701 · 22. Mai 2015

Hi,

Zunächst möchte ich anmerken, dass ich eher zu den Linux- Neulingen gehöre...

Mein Problem ist folgendes: Ich habe zusätzlich zu Win7 Opensuse13.2 auf einer zusätzlichen Festplatte mit eigener Linux Partition installiert - funktioniert auch alles gut soweit, nur lässt sich der Laptop im Betrieb mit Opensuse richtig ausschalten.

Er fährt zunächst Herunter, bleibt jedoch hängen und kann nur abgeschaltet werden indem ich den Ausschalter gedrückt halte. In Windows habe ich nach wie vor keine Probleme, der Laptop lässt sich problemlos abschalten.

Hat jemand eine Idee woran das liegen könnte oder vielleicht sogar einen Vorschlag wie das Problem behoben werden kann...?

Vielen Dank im Voraus

Manu

P.S.: Ich verwende einen HP envy 14-3000eg spectre

Manu1701 · 27. Mai 2015

Ich habe ein wenig hier um Forum gestöbert und eine ähnliche Problematik gefunden. Dort wurde das Problem durch hinzügen des Befehl acpi=force im Bootloader gelöst...

bei mir löst dies das Problem leider nicht.

bei Eingabe des Befehls: dmesg|grep ACPI
erscheint folgendes:

ich wäre wirklich sehr dankbar für jede Hilfe...

Code

[	0.000000] BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS
[	0.000000] BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data
[	0.000000] ACPI: Early table checksm verification disabled
[	0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[	0.000000] ACPI: XSDT 0x00000000ACFFE120 000084 (v01 HPQOEM SLIC-MPC 00000001  	01000013)
[	0.000000] ACPI: FACP 0x00000000ACFFC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[	0.000000] ACPI: DSDT 0x00000000ACFEC000 00C728 (v01 HP 	17CA 	00000000 MSFT 01000013)
[	0.000000] ACPI: FACS 0x00000000ACF6C000 000040
[	0.000000] ACPI: ASF! 0x00000000ACFFD000 0000A5 (v32 HP 	17CA 	00000001 MSFT 01000013)
[	0.000000] ACPI: HPET 0x00000000ACFFB000 000038 (v01 HP 	17CA 	00000001 MSFT 01000013)
[	0.000000] ACPI: APIC 0x00000000ACFFA000 00008C (v02 HP 	17CA 	00000001 MSFT 01000013)
[	0.000000] ACPI: MCFG 0x00000000ACFF9000 00003C (v01 HP 	17CA 	00000001 MSFT 01000013)
[	0.000000] ACPI: SLIC 0x00000000ACFEB000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[	0.000000] ACPI: SSDT 0x00000000ACFEA000 000D52 (v01 HP 	17CA 	00001000 MSFT 01000013)
[	0.000000] ACPI: BOOT 0x00000000ACFE8000 000028 (v01 HP 	17CA 	00000001 MSFT 01000013)
[	0.000000] ACPI: ASPT 0x00000000ACFE5000 000034 (v07 HP 	17CA 	00000001 MSFT 01000013)
[	0.000000] ACPI: SSDT 0x00000000ACFE4000 000804 (v01 HP 	17CA 	00003000 INTL 20100121)
[	0.000000] ACPI: SSDT 0x00000000ACFE3000 000996 (v01 HP 	17CA 	00003000 INTL 20100121)
[	0.000000] ACPI: SSDT 0x00000000ACFE2000 0000D0 (v01 HP 	17CA 	00003000 INTL 20100121)
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] ACPI: PM-Timer IO Port: 0x408
[	0.000000] ACPI: Local APIC address 0xfee00000
[	0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[	0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[	0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[	0.000000] ACPI: IRQ0 used by override.
[	0.000000] ACPI: IRQ2 used by override.
[	0.000000] ACPI: IRQ9 used by override.
[	0.000000] Using ACPI (MADT) for SMP configuration information
[	0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[	0.000065] ACPI: Core revision 20140424
[	0.021881] ACPI: All ACPI Tables successfully acquired
[	0.959423] PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes)
[	0.963151] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[	0.963156] ACPI: bus type PCI registered
[	0.963160] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[	0.970316] ACPI: Added _OSI(Module Device)
[	0.970323] ACPI: Added _OSI(Processor Device)
[	0.970327] ACPI: Added _OSI(3.0 _SCP Extensions)
[	0.970330] ACPI: Added _OSI(Processor Aggregator Device)
[	0.978377] ACPI: Executed 1 blocks of module-level executable AML code
[	0.989259] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[	0.991044] ACPI: Dynamic OEM Table Load:
[	0.991068] ACPI: SSDT 0xFFFF88014F03A800 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[	0.995258] ACPI: Dynamic OEM Table Load:
[	0.995277] ACPI: SSDT 0xFFFF880149469800 000303 (v01 PmRef  ApIst	00003000 INTL 20100121)
[	0.998551] ACPI: Dynamic OEM Table Load:
[	0.998567] ACPI: SSDT 0xFFFF880149471E00 000119 (v01 PmRef  ApCst	00003000 INTL 20100121)
[	1.072889] ACPI: Interpreter enabled
[	1.072912] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[	1.072927] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[	1.072978] ACPI: (supports S0 S3 S4 S5)
[	1.072982] ACPI: Using IOAPIC for interrupt routing
[	1.073085] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[	1.089006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[	1.093545] pci 0000:00:1b.0: System wakeup disabled by ACPI
[	1.093983] pci 0000:00:1c.0: System wakeup disabled by ACPI
[	1.094398] pci 0000:00:1c.1: System wakeup disabled by ACPI
[	1.094826] pci 0000:00:1c.2: System wakeup disabled by ACPI
[	1.095241] pci 0000:00:1c.3: System wakeup disabled by ACPI
[	1.098630] pci 0000:00:1d.0: System wakeup disabled by ACPI
[	1.106042] pci 0000:02:00.0: System wakeup disabled by ACPI
[	1.112193] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[	1.112430] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[	1.112649] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[	1.112865] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[	1.113089] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[	1.113316] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[	1.113535] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[	1.113749] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[	1.114233] ACPI: Enabled 4 GPEs in block 00 to 3F
[	1.114406] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[	1.115050] ACPI: bus type USB registered
[	1.115368] PCI: Using ACPI for IRQ routing
[	1.151490] pnp: PnP ACPI init
[	1.151533] ACPI: bus type PNP registered
[	1.152324] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[	1.152428] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[	1.152564] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[	1.152693] pnp 00:03: Plug and Play ACPI device, IDs SYN1e58 SYN1e00 SYN0002 PNP0f13 (active)
[	1.153366] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[	1.154069] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[	1.154251] pnp: PnP ACPI: found 6 devices
[	1.154255] ACPI: bus type PNP unregistered
[	5.729602] ACPI: Lid Switch [LID0]
[	5.730010] ACPI: Power Button [PWRB]
[	5.730435] ACPI: Power Button [PWRF]
[	6.670930] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[	7.891224] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[	7.891250] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[	7.891261] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[	7.891276] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[	7.891283] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[	7.891335] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[	7.891342] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[	7.891357] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[	7.896671] ACPI: Thermal Zone [TZ01] (0 C)
[	7.915079] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[	7.915549] ACPI: AC Adapter [ACAD] (off-line)
[	8.003499] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[	8.003524] ACPI: Battery Slot [BAT0] (battery present)
[	8.127846] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[	8.127870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[	8.657237] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)

Alles anzeigen

Manu1701 · 27. Mai 2015

2. Teil der Ausgabe: (ist wirklich sehr lang...)

Code

(20140424/dsopcode-236)
[	8.657739] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014f048108), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[	8.657776] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014f048e78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[	8.658055] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[	8.658073] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014f048108), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[	8.658112] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014f048e78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[	8.660330] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[	8.660353] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014f048108), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[	8.660390] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014f048e78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[	8.660677] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236)
[	8.660701] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff88014f048108), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[	8.660735] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff88014f048e78), AE_AML_BUFFER_LIMIT (20140424/psparse-536)

Alles anzeigen

Opensuse 13.2 dualboot lässt sich nicht herunterfahren

Neuinstallation leap 15.5: init Prozess scheitert beim Booten - Kernel Panik

openSUSE jetzt mit bitidentisch rekonstruierbaren Paketen in der Factory-Codebasis und Tumbleweed (bit-by-bit reproducible builds)

VirtualBox erkennt keine USB-Geräte

GRUB: Einrichtung Last Entry Boot schlägt fehl

latex & kpathsea in Betrieb nehmen

Kukulkan

vpn

Nidrnox

hudel

uli11

Teilen