[Gelöst] OpenSuse 13.2 installiert - kein Lan

Hinweis: In dem Thema [Gelöst] OpenSuse 13.2 installiert - kein Lan gibt es 11 Antworten auf 2 Seiten. Der letzte Beitrag () befindet sich auf der letzten Seite.
  • Guten Tag,


    da ein neuer Laptop her musste, habe ich mir überlegt von Windows7 auf ein Dualbootsystem mit Linux Opensuse umzusteigen. Deswegen bin ich noch ein totaler Anfänger in Sachen Linux.
    Nachdem ich nun beide Betriebssysteme erfolgreich zum Laufen gebracht habe, komme ich beim Linuxsystem nicht weiter. Trotz einem direkten Anschluss an den Hitronrouter von KD bekomme ich keine LAN Verbindung, geschweige den eine Internetvebindung.


    Also das Shellscript collectNWDataGUI ausgeführt:




    Und diese Fehler bekommen.
    http://nopaste.info/2ccd472180.html


    Mein Laptop ist das Lenovo Edge e545 ( http://www.notebooksbilliger.d…ge+e545+20b2000pge+140547 )
    Leider weiß ich nicht genau welche Netzwerkkarte verbaut ist, unter dem WindowsGerätemanager steht nur, dass es ein Realtek PCIe GBE Family Controller ist. Internet mit Windows funktiniert auch einwandfrei.


    Ich bedanke mich schonmal im Vorfeld für die Hilfe und noch einen schönen Sonntag :)

  • Also das Shellscript collectNWDataGUI ausgeführt:


    "cnd0120e
    cnd0480w
    cdn0310w"


    Und diese Fehler bekommen.


    Poste einfach die durch das Script entstehende Textdatei hier als Anhang, darin sind alle notwendigen Informationen enthalten.

    Für den Inhalt des Beitrages 74061 haftet ausdrücklich der jeweilige Autor: Sauerland

  • Danke für die Antwort, hatte auch die falschen meldungen. Hier der log :

    Code
    collectNWData.sh V0.7.4 -iGUI-
    --- Which type of your network connection should be tested?--- (2) Wired connection
    --- What's the type of networktopology?--- (2) DSL HW router <---> LinuxClient
    --- On which host is the script executed?--- (1) LinuxClient
    --- NWCollect is collecting networkconfiguration information into file ...
    --- NWEliza is analyzing the system for common network configuration errors ...!!! CND0120E: Network card enp2s0 has no IP address!!! CND0230W: IPV6 enabled and may be the reason for network problems!!! CND0310W: Classic network configuration with ifup was detected. Configuration with networkmanager is easier
    --- Go to http://www.linux-tips-and-tricks.de/CND to get more detailed instructions --- about the error/warning messages and how to fix the problems on your own.
    --- If you are unsuccessful then place the contents of file collectNWData.txt in the net--- (see http://www.linux-tips-and-tricks.de/CND_UPL for links) --- and then paste the nopaste link on your favorite Linux forum.
    ======================================================================================================================= cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================/etc/os-release/etc/SuSE-releaseNAME=openSUSEVERSION="13.2 (Harlequin)"VERSION_ID="13.2"PRETTY_NAME="openSUSE 13.2 (Harlequin) (x86_64)"ID=opensuseANSI_COLOR="0;32"CPE_NAME="cpe:/o:opensuse:opensuse:13.2"BUG_REPORT_URL="https://bugs.opensuse.org"HOME_URL="https://opensuse.org/"ID_LIKE="suse"openSUSE 13.2 (x86_64)VERSION = 13.2CODENAME = Harlequin# /etc/SuSE-release is deprecated and will be removed in the future, use /etc/os-release instead===== uname -a ===================================================================================================Linux linux-fk2c 3.16.6-2-desktop #1 SMP PREEMPT Mon Oct 20 13:47:22 UTC 2014 (feb42ea) x86_64 x86_64 x86_64 GNU/Linux===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "^#|^$" | grep -v "=''" ================================--- /etc/sysconfig/network/ifcfg-enp2s0BOOTPROTO='static'DHCLIENT_SET_DEFAULT_ROUTE='yes'NAME='RTL8111/8168 PCI Express Gigabit Ethernet controller'STARTMODE='ifplugd'===== ping tests =================================================================================================Ping of 173.194.35.180 failedping: unknown host www.google.comPing of www.google.com failed===== cat /etc/resolv | grep -i "nameserver" ========================================================================== cat /etc/hosts =============================================================================================127.0.0.1	localhost===== (route -n && route -A inet6 -n) | egrep "(en|wl|eth|ath|ra|wlan|dsl|ppp)" ==================================Kernel IP RoutentabelleZiel            Router          Genmask         Flags Metric Ref    Use Iface===== ifconfig (filtered for en|wl|eth|wlan|ra|ath|dsl|ppp) ======================================================enp2s0    Link encap:Ethernet  Hardware Adresse ##:##:##:##:##:#1            inet6 Adresse: fd00:788d:f7cf:4cf2:faa9:63ff:fe56:9893/64 Gültigkeitsbereich:Global          inet6 Adresse: 2a02:8108:600:3b34:998c:3d14:bc25:6ded/64 Gültigkeitsbereich:Global          inet6 Adresse: fe80::faa9:63ff:fe56:9893/64 Gültigkeitsbereich:Verbindung          inet6 Adresse: 2a02:8108:600:3b34:faa9:63ff:fe56:9893/64 Gültigkeitsbereich:Global          inet6 Adresse: fd00:788d:f7cf:4cf2:998c:3d14:bc25:6ded/64 Gültigkeitsbereich:Global          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:8 errors:0 dropped:0 overruns:0 frame:0          TX packets:54 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 Sendewarteschlangenlänge:1000           RX bytes:1392 (1.3 Kb)  TX bytes:10639 (10.3 Kb)===== lspci ======================================================================================================02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)	Subsystem: Lenovo Device [17aa:5100]	Kernel driver in use: r8169--03:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)	Subsystem: Lenovo Device [17aa:0611]	Kernel driver in use: bcma-pci-bridge===== lsusb | grep -v "root hub" =================================================================================Bus 002 Device 003: ID 04f2:b44d Chicony Electronics Co., Ltd Bus 008 Device 002: ID 04ca:2007 Lite-On Technology Corp. Bus 001 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive===== hwinfo (filtered) ==========================================================================================33: PCI 200.0: 0200 Ethernet controller  Model: "Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller"  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."  Device: pci 0x8168 "RTL8111/8168 PCI Express Gigabit Ethernet controller"  SubVendor: pci 0x17aa "Lenovo"  SubDevice: pci 0x5100   Driver: "r8169"  Driver Modules: "r8169"  Device File: enp2s0  Link detected: yes    Driver Status: r8169 is active    Driver Activation Cmd: "modprobe r8169"34: PCI 300.0: 0280 Network controller  Model: "Broadcom BCM43142 802.11b/g/n"  Vendor: pci 0x14e4 "Broadcom"  Device: pci 0x4365 "BCM43142 802.11b/g/n"  SubVendor: pci 0x17aa "Lenovo"  SubDevice: pci 0x0611   Driver: "bcma-pci-bridge"  Driver Modules: "bcma"    Driver Status: bcma is active    Driver Activation Cmd: "modprobe bcma"===== lsmod (filtered) ===========================================================================================| 6lowpan_iphc    | ablk_helper     | ac              | aesni_intel     | aes_x86_64       || af_packet       | bcma            | bnep            | drm             | drm_kms_helper   || gf128mul        | ghash_clmulni_intel| glue_helper     | i2c_algo_bit    | i2c_piix4        || iscsi_boot_sysfs| iscsi_ibft      | k10temp         | kvm             | kvm_amd          || lrw             | memstick        | mfd_core        | mii             | mmc_core         || ohci_pci        | r8169           | rfkill          | rtsx_pci        | rtsx_pci_ms      || rtsx_pci_sdmmc  | serio_raw       | sg              | shpchp          | sr_mod           || ttm             | uas             | usb_storage     | v4l2_common     | wmi              || xfs             | xhci_hcd        |===== egrep 'en|wl|eth|ath|wlan|ra|ppp' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ======================================================================================================================*** NWElizaStates V0.7.4PNIN:1 CFR:1 IF:enp2s0 IM:2 DI:1 FALON:1 NIC:1 cNiC:1:1 NI:2 cNI:2 DHCP:0 NIWD:0 CM:0 IP6:1 KM:0 1 WLW:0 RTDT:SuSE GUI:1 UID:0

    Einmal editiert, zuletzt von Sauerland ()

    Für den Inhalt des Beitrages 74063 haftet ausdrücklich der jeweilige Autor: MinusEinZwölftel

  • Lesbar ist das aber nicht..........


    Da fehlen in Zeile 9 die Zeilenvorschübe..............

    Für den Inhalt des Beitrages 74064 haftet ausdrücklich der jeweilige Autor: Sauerland

  • Sorry, hab das so schnell gar nicht gesehen.
    Leider bekomme ich das mit der richtigen Formatierung hier auch nicht hin. Deswegen habe ich das mal bei noPaste gepostet ( da geht es augenscheinlich ).
    http://nopaste.info/2ccd472180.html

  • Hab Deinen Beitrag einmal bearbeitet und die Datei angehängt, da die Datei irgendwann auf einme Paste-Server gelöscht wird.

    Für den Inhalt des Beitrages 74073 haftet ausdrücklich der jeweilige Autor: Sauerland

  • Stell einmal in Yast----Netzwerk----Netzwerkeinstellungen auf dhcp um.

    Für den Inhalt des Beitrages 74075 haftet ausdrücklich der jeweilige Autor: Sauerland

  • IPV6 deaktivieren, schauen, ob im Router dhcp angestellt ist?


    Evtl. auch einmal den Router neu starten.

    Für den Inhalt des Beitrages 74083 haftet ausdrücklich der jeweilige Autor: Sauerland

  • Also ich hatte nach Installation von openSUSE13.1 auf meinem Desktop auch erstmal keine LAN-Verbindung.
    Yast > Netzwerkgeräte > Netzwerkeinstellungen > Globale Optionen > Benutzergesteuert mithilfe von Networkmanager (hier Haken rein) .. und schon hats geklappt!


    Bei meinem Notebook hatte ich nach der Installation von openSUSE13.2 keine WLAN-Verbindung.
    Yast > Netzwerkgeräte > Netzwerkeinstellungen > Globale Optionen > Wicked (hier Häkchen rein) .. und schon hats geklappt!
    Vorher habe ich noch DHCP aktiviert.