Hallo Profis,
bekomme Kaffeine leider nicht zum Laufen.
Bin schon seit längerem an dem Thema und habe es jetzt nochmal in Angriff genommen.
Es startet kurz, für gefühlte 100ms ist auch ein Bild da, dann schliesst das Programm.
Habe schon einiges probiert
Mein System:
Suse 13.2
KDE 4
Grafikkarte Radeon HD5450, Treiber fglrx
Kaffeine 0.8.8-57.13 aus dem Packman Repository.
Denke das Grafiktreiber und TV-Karte richtig erkannt werden
Wenn ich Kaffeine von der Konsole starte bekomme ich folgende Meldung:
uwe@linux-ybj5:~> kaffeine
kbuildsycoca running...
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
/dev/dvb/adapter0/frontend0 : opened ( ST STV0299 DVB-S ) (100ms)
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
0 EPG plugins loaded for device 0:0.
uwe@linux-ybj5:~> Tuning to: Eurosport 1 Deutschland / autocount: 0
DvbCam::probe(): LLCI slot found on /dev/dvb/adapter0/ca0
DvbCam::probe(): no CA module present on /dev/dvb/adapter0/ca0
Using DVB device 0:0 "ST STV0299 DVB-S"
tuning DVB-S to 12226000 h 27500000
inv:2 fecH:3 mod:0
DiSEqC: switch pos 0, 18V, hiband (index 3)
Diseqc settings time = 42 ms
. LOCKED.
Tuning time = 101 ms
NOUT: 1
dvbEvents 0:0 started
Tuning delay: 209 ms
pipe opened
xine pipe opened /home/uwe/.kaxtv.ts
Very strange! got a DCOPReply opcode, but we were not waiting for a reply!
KCrash: Application 'kaffeine' crashing...
Could not find 'drkonqi' executable.
KCrash cannot reach kdeinit, launching directly.
^C
Alles anzeigen
Kann leider nicht erkennen warum es crasht.
Hier noch ein Auszug von hwinfo:
PCI 501.0: 11100 Multimedia controller
[Created at pci.328]
Unique ID: Ikk3.Iq3oG6M3R9B
Parent ID: 6NW+.mTebKEmhWYA
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:05:01.0
SysFS BusID: 0000:05:01.0
Hardware Class: dvb card
Model: "Philips Semiconductors SAA7146"
Vendor: pci 0x1131 "Philips Semiconductors"
Device: pci 0x7146 "SAA7146"
SubVendor: pci 0x1894 "KNC One"
SubDevice: pci 0x0014
Revision: 0x01
Driver: "budget_av"
Driver Modules: "saa7146"
Memory Range: 0xfebffc00-0xfebffdff (rw,non-prefetchable)
IRQ: 17 (68459 events)
Module Alias: "pci:v00001131d00007146sv00001894sd00000014bc04sc80i00"
Driver Info #0:
Driver Status: budget-av is active
Driver Activation Cmd: "modprobe budget-av"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #28 (PCI bridge)
Alles anzeigen
Info zur Grafikkarte:
linux-ybj5:/home/uwe # hwinfo --gfxcard
28: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.328]
Unique ID: VCu0.EnHkl54BBK2
Parent ID: vSkL.kA6er9hJ5O0
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ATI Cedar PRO [Radeon HD 5450/6350]"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x68f9 "Cedar PRO [Radeon HD 5450/6350]"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x0366
Driver: "fglrx_pci"
Driver Modules: "fglrx"
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
Memory Range: 0xfe8c0000-0xfe8dffff (rw,non-prefetchable)
I/O Ports: 0xc000-0xcfff (rw)
Memory Range: 0xfe8a0000-0xfe8bffff (ro,non-prefetchable,disabled)
IRQ: 46 (1 event)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d000068F9sv00001043sd00000366bc03sc00i00"
Driver Info #0:
Driver Status: radeon is not active
Driver Activation Cmd: "modprobe radeon"
Driver Info #1:
Driver Status: fglrx is active
Driver Activation Cmd: "modprobe fglrx"
Alles anzeigen
Leider bin ich nur ein bescheidener User und freue mich über jeden Hinweis der mich zum Ziel führt.
Vorerst vielen Dank.
Achja, wünsche euch noch ein gutes Neues, hat ja erst gerade angefangen