Kaffeine, startet nicht

uwe@linux-ybj5:~> kaffeine
kbuildsycoca running...
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
/dev/dvb/adapter0/frontend0 : opened ( ST STV0299 DVB-S ) (100ms)
libpng warning: Interlace handling should be turned on when using png_read_image
libpng warning: Interlace handling should be turned on when using png_read_image
0 EPG plugins loaded for device 0:0.
uwe@linux-ybj5:~> Tuning to: Eurosport 1 Deutschland / autocount: 0
DvbCam::probe(): LLCI slot found on /dev/dvb/adapter0/ca0
DvbCam::probe(): no CA module present on /dev/dvb/adapter0/ca0
Using DVB device 0:0 "ST STV0299 DVB-S"
tuning DVB-S to 12226000 h 27500000
inv:2 fecH:3 mod:0
DiSEqC: switch pos 0, 18V, hiband (index 3)
Diseqc settings time = 42 ms
. LOCKED.
Tuning time = 101 ms
NOUT: 1
dvbEvents 0:0 started
Tuning delay: 209 ms
pipe opened
xine pipe opened /home/uwe/.kaxtv.ts
Very strange! got a DCOPReply opcode, but we were not waiting for a reply!
KCrash: Application 'kaffeine' crashing...
Could not find 'drkonqi' executable.
KCrash cannot reach kdeinit, launching directly.
^C

PCI 501.0: 11100 Multimedia controller
  [Created at pci.328]
  Unique ID: Ikk3.Iq3oG6M3R9B
  Parent ID: 6NW+.mTebKEmhWYA
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:05:01.0
  SysFS BusID: 0000:05:01.0
  Hardware Class: dvb card
  Model: "Philips Semiconductors SAA7146"
  Vendor: pci 0x1131 "Philips Semiconductors"
  Device: pci 0x7146 "SAA7146"
  SubVendor: pci 0x1894 "KNC One"
  SubDevice: pci 0x0014 
  Revision: 0x01
  Driver: "budget_av"
  Driver Modules: "saa7146"
  Memory Range: 0xfebffc00-0xfebffdff (rw,non-prefetchable)
  IRQ: 17 (68459 events)
  Module Alias: "pci:v00001131d00007146sv00001894sd00000014bc04sc80i00"
  Driver Info #0:
    Driver Status: budget-av is active
    Driver Activation Cmd: "modprobe budget-av"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #28 (PCI bridge)

linux-ybj5:/home/uwe # hwinfo --gfxcard
28: PCI 100.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.328]
  Unique ID: VCu0.EnHkl54BBK2
  Parent ID: vSkL.kA6er9hJ5O0
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "ATI Cedar PRO [Radeon HD 5450/6350]"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x68f9 "Cedar PRO [Radeon HD 5450/6350]"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x0366 
  Driver: "fglrx_pci"
  Driver Modules: "fglrx"
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  Memory Range: 0xfe8c0000-0xfe8dffff (rw,non-prefetchable)
  I/O Ports: 0xc000-0xcfff (rw)
  Memory Range: 0xfe8a0000-0xfe8bffff (ro,non-prefetchable,disabled)
  IRQ: 46 (1 event)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00001002d000068F9sv00001043sd00000366bc03sc00i00"
  Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
  Driver Info #1:
    Driver Status: fglrx is active
    Driver Activation Cmd: "modprobe fglrx"