[gelöst] Oracle Virtualbox 5.0 startet nicht mehr

alteropa · 14. Februar 2016

Hallo zusammen,

meine Virtualbox startet nicht mehr.
Ich erhalte folgende Fehlermeldung

RTR3InitEx failed with rc=-1912 (rc=-1912)

The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Executing

'/sbin/rcvboxdrv setup'

may correct this. Make sure that you do not mix the OSE version and the PUEL version of VirtualBox.

where: supR3HardenedMainInitRuntime what: 4 VERR_VM_DRIVER_VERSION_MISMATCH (-1912) - The installed support driver doesn't match the version of the user.

Wer kann mir weiter helfen?
Vielen Dank

Alero · 14. Februar 2016

Ohne Hintergrundinformationen kann dir keiner weiterhelfen. Wir wissen weder welches opensuse du nutzt noch die allergeringsten Basics.

Sauerland · 14. Februar 2016

Poste bitte:

Code

zypper se -si virtualb vbox kernel gcc make

Code

uname -a

muck · 14. Februar 2016

Wenn kernel, gcc und make installiert sind, dann gebe als root auf der Konsole ein:

/usr/lib/virtualbox/vboxdrv.sh setup

Dann sollte alles wieder funktionieren.

Sauerland · 14. Februar 2016

Zitat von muck

Wenn kernel, gcc und make installiert sind, dann gebe als root auf der Konsole ein:

Du hast noch Virtualbox aus dem Oracle-Repo bzw. von der Oracle Seite vergessen, er kann ja trotzdem die Pakete aus dem OSS-Repo oder Virtualization Repo installiert haben.........

alteropa · 19. Februar 2016

Code

zypper se -si virtualb vbox kernel gcc make
Loading repository data...
Reading installed packages...


S | Name                           | Type    | Version                     | Arch   | Repository            
--+--------------------------------+---------+-----------------------------+--------+-----------------------
i | VirtualBox-5.0                 | package | 5.0.14_105127_openSUSE132-1 | i586   | Virtualbox            
i | automake                       | package | 1.13.4-5.1.2                | noarch | Haupt-Repository (OSS)
i | automake                       | package | 1.13.4-5.1.2                | noarch | openSUSE-13.2-0       
i | devel_kernel                   | pattern | 20141007-5.1                | x86_64 | openSUSE-13.2-Update  
i | gcc                            | package | 4.8-7.1.2                   | x86_64 | Haupt-Repository (OSS)
i | gcc                            | package | 4.8-7.1.2                   | x86_64 | openSUSE-13.2-0       
i | gcc-c++                        | package | 4.8-7.1.2                   | x86_64 | Haupt-Repository (OSS)
i | gcc-c++                        | package | 4.8-7.1.2                   | x86_64 | openSUSE-13.2-0       
i | gcc-info                       | package | 4.8-7.1.2                   | x86_64 | Haupt-Repository (OSS)
i | gcc-info                       | package | 4.8-7.1.2                   | x86_64 | openSUSE-13.2-0       
i | gcc48                          | package | 4.8.3+r212056-2.2.4         | x86_64 | Haupt-Repository (OSS)
i | gcc48                          | package | 4.8.3+r212056-2.2.4         | x86_64 | openSUSE-13.2-0       
i | gcc48-c++                      | package | 4.8.3+r212056-2.2.4         | x86_64 | Haupt-Repository (OSS)
i | gcc48-c++                      | package | 4.8.3+r212056-2.2.4         | x86_64 | openSUSE-13.2-0       
i | gcc48-info                     | package | 4.8.3+r212056-2.2.4         | noarch | Haupt-Repository (OSS)                                                              
i | gcc48-info                     | package | 4.8.3+r212056-2.2.4         | noarch | openSUSE-13.2-0                                                                     
i | kernel-default-devel           | package | 3.16.7-32.1                 | x86_64 | openSUSE-13.2-Update                                                                
i | kernel-default-devel           | package | 3.16.7-29.1                 | x86_64 | openSUSE-13.2-Update                                                                
i | kernel-desktop                 | package | 3.16.7-32.1                 | x86_64 | openSUSE-13.2-Update                                                                
i | kernel-desktop                 | package | 3.16.7-29.1                 | x86_64 | openSUSE-13.2-Update                                                                
i | kernel-desktop-devel           | package | 3.16.7-32.1                 | x86_64 | openSUSE-13.2-Update                                                                
i | kernel-desktop-devel           | package | 3.16.7-29.1                 | x86_64 | openSUSE-13.2-Update                                                                
i | kernel-devel                   | package | 3.16.7-32.1                 | noarch | openSUSE-13.2-Update                                                                
i | kernel-devel                   | package | 3.16.7-29.1                 | noarch | openSUSE-13.2-Update                                                                
i | kernel-firmware                | package | 20141122git-5.1             | noarch | openSUSE-13.2-Update                                                                
i | kernel-macros                  | package | 3.16.7-32.1                 | noarch | openSUSE-13.2-Update                                                                
i | kernel-source                  | package | 3.16.7-32.1                 | noarch | openSUSE-13.2-Update                                                                
i | kernel-source                  | package | 3.16.7-29.1                 | noarch | openSUSE-13.2-Update  
i | kernel-syms                    | package | 3.16.7-32.1                 | x86_64 | openSUSE-13.2-Update  
i | kernel-syms                    | package | 3.16.7-29.1                 | x86_64 | openSUSE-13.2-Update  
i | kernel-xen-devel               | package | 3.16.7-32.1                 | x86_64 | openSUSE-13.2-Update  
i | kernel-xen-devel               | package | 3.16.7-29.1                 | x86_64 | openSUSE-13.2-Update  
i | libatomic1-gcc49               | package | 4.9.0+r211729-2.1.7         | x86_64 | Haupt-Repository (OSS)
i | libffi4-gcc49-32bit            | package | 4.9.0+r211729-2.1.7         | x86_64 | Haupt-Repository (OSS)
i | libgcc_s1                      | package | 4.8.3+r212056-2.2.4         | x86_64 | Haupt-Repository (OSS)
i | libgcc_s1                      | package | 4.8.3+r212056-2.2.4         | x86_64 | openSUSE-13.2-0       
i | libgcc_s1-32bit                | package | 4.8.3+r212056-2.2.4         | x86_64 | Haupt-Repository (OSS)
i | libgcc_s1-32bit                | package | 4.8.3+r212056-2.2.4         | x86_64 | openSUSE-13.2-0       
i | libgcj_bc1-gcc49               | package | 4.9.0+r211729-2.1.7         | x86_64 | Haupt-Repository (OSS)
i | libitm1-gcc49                  | package | 4.9.0+r211729-2.1.7         | x86_64 | Haupt-Repository (OSS)
i | libtsan0-gcc49                 | package | 4.9.0+r211729-2.1.7         | x86_64 | Haupt-Repository (OSS)
i | make                           | package | 4.0-2.2.3                   | x86_64 | Haupt-Repository (OSS)
i | make                           | package | 4.0-2.2.3                   | x86_64 | openSUSE-13.2-0       
i | makedumpfile                   | package | 1.5.7-1.1                   | x86_64 | Haupt-Repository (OSS)
i | makedumpfile                   | package | 1.5.7-1.1                   | x86_64 | openSUSE-13.2-0       
i | makeinfo                       | package | 4.13a-38.1.2                | x86_64 | Haupt-Repository (OSS)
i | makeinfo                       | package | 4.13a-38.1.2                | x86_64 | openSUSE-13.2-0       
i | nfs-kernel-server              | package | 1.3.0-4.4.1                 | x86_64 | openSUSE-13.2-Update  
i | patterns-openSUSE-devel_kernel | package | 20141007-5.1                | x86_64 | openSUSE-13.2-Update

Alles anzeigen

Code

uname -a
Linux linux-nbu7.site 3.16.7-32-desktop #1 SMP PREEMPT Wed Jan 20 14:05:33 UTC 2016 (d4df98a) x86_64 x86_64 x86_64 GNU/Linux

D_Dau · 19. Februar 2016

Hallo

Kein Wunder das es bei dem "Kernel Wirrwarr" Schwierigkeiten gibt.
Teilweise sogar der gleiche Kernel in verschiedenen Versionen.
Entscheide dich für einen und schmeiß die anderen runter.

SUSEDJAlex · 19. Februar 2016

poste doch mal zum Vergleich:

Code

zypper lr -Up

LG SUSEDJAlex

Sauerland · 19. Februar 2016

Wir räumen einmal die Repos auf, poste:

Code

zypper lr -uP

Danach aktualisieren wir die kernel einmal, da der bei dir laufende Kernel nicht der aktuellste ist.

alteropa · 19. Februar 2016

Code

zypper lr -uP
#  | Alias                         | Name                               | Enabled | GPG Check | Refresh | Priority | URI                                                                 
---+-------------------------------+------------------------------------+---------+-----------+---------+----------+---------------------------------------------------------------------
 1 | 12.3                          | 12.3                               | Yes     | (r ) Yes  | Yes     |   99     | http://download.virtualbox.org/virtualbox/rpm/opensuse/12.3         
 2 | Packman Repository            | Packman Repository                 | Yes     | (r ) Yes  | Yes     |   99     | http://ftp.gwdg.de/pub/linux/packman/suse/openSUSE_13.2/            
 3 | SuSE                          | SuSE                               | Yes     | (r ) Yes  | Yes     |   99     | http://download.videolan.org/SuSE/13.2/                             
 4 | Virtualbox                    | Virtualbox                         | Yes     | (r ) Yes  | Yes     |   99     | http://download.virtualbox.org/virtualbox/rpm/opensuse/13.2         
 5 | download.opensuse.org-non-oss | Haupt-Repository (NON-OSS)         | Yes     | ( p) Yes  | Yes     |   99     | http://download.opensuse.org/distribution/13.2/repo/non-oss/        
 6 | download.opensuse.org-oss     | Haupt-Repository (OSS)             | Yes     | ( p) Yes  | Yes     |   99     | http://download.opensuse.org/distribution/13.2/repo/oss/            
 7 | libdvdcss repository          | libdvdcss repository               | Yes     | (r ) Yes  | Yes     |   99     | http://opensuse-guide.org/repo/13.2/                                
 8 | openSUSE-13.2-0               | openSUSE-13.2-0                    | Yes     | ( p) Yes  | No      |   99     | cd:///?devices=/dev/disk/by-id/ata-HL-DT-ST_DVDRAM_GT70N_KY2C86B1822
 9 | repo-debug                    | openSUSE-13.2-Debug                | Yes     | (r ) Yes  | Yes     |   99     | http://download.opensuse.org/debug/distribution/13.2/repo/oss/      
10 | repo-debug-update             | openSUSE-13.2-Update-Debug         | Yes     | (r ) Yes  | Yes     |   99     | http://download.opensuse.org/debug/update/13.2/                     
11 | repo-debug-update-non-oss     | openSUSE-13.2-Update-Debug-Non-Oss | Yes     | (r ) Yes  | Yes     |   99     | http://download.opensuse.org/debug/update/13.2-non-oss/             
12 | repo-source                   | openSUSE-13.2-Source               | Yes     | (r ) Yes  | Yes     |   99     | http://download.opensuse.org/source/distribution/13.2/repo/oss/     
13 | repo-update                   | openSUSE-13.2-Update               | Yes     | (r ) Yes  | Yes     |   99     | http://download.opensuse.org/update/13.2/                           
14 | repo-update-non-oss           | openSUSE-13.2-Update-Non-Oss       | Yes     | (r ) Yes  | Yes     |   99     | http://download.opensuse.org/update/13.2-non-oss/

Alles anzeigen

[gelöst] Oracle Virtualbox 5.0 startet nicht mehr

Probleme mit dem Ausdruck von pdf-Dateien über Okular

Eclipse (Java IDE) crash

Veracrypt Einhängepunkt

Neuinstallation leap 15.5: init Prozess scheitert beim Booten - Kernel Panik

latex & kpathsea in Betrieb nehmen

Kukulkan

vpn

Nidrnox

hudel

uli11

Teilen