Hallo,
nach einspielen des neuen Kernels für die Unterstützung des W-LAN Controllers
erhalte ich nach der Ausschrift "initiale ramdidisk geladen" nur einen schwarzen
Bildschirm. Das Protokoll der Einspielung liegt im Dateianhang. Aufgefallen sind
errors im Grafikbereich. Ich kann sie aber nicht interpretieren. Ich füge noch an
hwinfo --gfxcard (unter Kernel 4.4)
Code
hwinfo --gfxcard
24: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.378]
Unique ID: VCu0.sSDIeS+FgM6
Parent ID: vSkL.cfovEanEeA4
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "nVidia GP104M [GeForce GTX 1070]"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x1be1 "GP104M [GeForce GTX 1070]"
SubVendor: pci 0x1558 "CLEVO/KAPOK Computer"
SubDevice: pci 0x7708
Revision: 0xa1
Driver: "nvidia"
Driver Modules: "nvidia"
Memory Range: 0xdb000000-0xdbffffff (rw,non-prefetchable)
Memory Range: 0x90000000-0x9fffffff (ro,non-prefetchable)
Memory Range: 0xa0000000-0xa1ffffff (ro,non-prefetchable)
I/O Ports: 0xe000-0xefff (rw)
Memory Range: 0xdc000000-0xdc07ffff (ro,non-prefetchable,disabled)
IRQ: 143 (2712 events)
Module Alias: "pci:v000010DEd00001BE1sv00001558sd00007708bc03sc00i00"
Driver Info #0:
Driver Status: nouveau is not active
Driver Activation Cmd: "modprobe nouveau"
Driver Info #1:
Driver Status: nvidia_drm is active
Driver Activation Cmd: "modprobe nvidia_drm"
Driver Info #2:
Driver Status: nvidia is active
Driver Activation Cmd: "modprobe nvidia"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #8 (PCI bridge)
Primary display adapter: #24
Alles anzeigen
Danke für evtl. Hinweise
Gruß w.w.