(erledigt)Allgemeine Anfängerfragen
- Wyqer
- Geschlossen
- Erledigt
-
-
Ich werd mich auch mal soweit ich was finde weiter umschauen und versuchen das Problem hinzubekommen. Falls ich es dann löse melde ich mich natürlich wieder und falls du was findest wirst du dich ja ebenso melden.
laut lsusb erkennt er das UMTS Modem im den Stick aber auch ohne ein Problem.... sonst würde es ja auch nicht unter Networkmanager laufen.
-
Hallo,
Klar werde ich was Posten wenn ich was neues erfahre, interessiert mich auch Persönlich da diese Methode immer verbreiteter wird.
Gutes Stichwort → " lsusb ", sei bitte so gut und öffne die Konsole, dann den UMTS-Stick anstecken und dann in der Konsole
ausführen, dann die Ausgabe bitte in Code-Tags gesetzt Posten. Mal schauen was man so unter der Produkt-ID finden kann.
-
Ein kleines Update:
Mittlerweile erkennt umtsmon den Stick. Frag mich aber nicht warum, ging auf einmal nachdem ich opensuse einmal neu gestartet hatte, obwohl ich seit dem start davor nichts verändert hab an Treibern oder so. Er hat dann erst rumgemeckert von wegen nicht als root usw. doch per "Fehler beheben" und zweimaliger root pw eingabe hat er es auf mein Benutzerkonto selbstständig eingerichtet. Profil ist auch eingerichtet. Allerdings verbindet er mich dann nicht. Er hat Empfang, sagt auch Vodafone.de usw. aber er meint er hätte einen ppp Fehler.Zitat<<PPP did not provide any stderr information>>
Da bin ich also im Moment dran.
Edit:
lsusb sagt:ZitatBus 005 Device 004: ID 04b4:6830 Cypress Semiconductor Corp. CY7C68300A EZ-USB AT2 USB 2.0 to ATA/ATAPI
Bus 005 Device 002: ID 152e:2507 LG (HLDS)
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Sieht nach meiner N00bie Meinung alles in Ordnung aus -
Dann habe ich (wie in der Fehlermeldung geraten wurde) umtsmon mit
Zitatumtsmon -v4
über das Terminal gestartet und folgende lange Liste bekommen. Vielleicht kann ja jemand hier der mehr Erfahrung hat als ich damit etwas anfangen:
Zitatumtsmon version 0.9.50-20090219 .
##P1 t=035: setVerbosity: '4'
##P2 t=035: set verbosity level to 4
##P2 t=035: set PPP verbosity level to 1
##P2 t=035: Settings will be saved in : '/home/wyqer/.umtsmon'
##P4 t=035: loadTranslator('qt', 'de')
##P4 t=035: .. found in '/usr/lib/qt3/translations'
##P4 t=035: loadTranslator('umtsmon', 'de')
##P4 t=035: .. found in '/usr/share/umtsmon/translations'
##P3 t=035: Will use specified (de) locale for QT-internal strings
##P3 t=035: Will use specified (de) locale for umtsmon strings
##P2 t=035: Warning with Memory Name: WelcomeMsg, Message: Welcome to umtsmon.
##P3 t=035: Message not shown due to user preference
##P3 t=035: ObserverManager constructor
##P3 t=035: PPPConnection::setNewPPPState state 0 to 3
##P2 t=035: Someone else's PPPD was killed
##P3 t=035: PPPConnection::setNewPPPState state 3 to 0
##P3 t=035: INSIDE PARENT, uid=1000, pid=19618
##P3 t=035: INSIDE CHILD, uid=1000, pid=19632
##P4 t=035: pppd version string 'pppd version 2.4.5' results in '2.4.5'.
##P3 t=035: Device creation for type 0x00000001 requested
##P2 t=035: UIState::newPPPState(0) callback called
##P2 t=038: ***UIState::update(void), state=0
##P2 t=038:UIState::setState(0 -> 1)
##P3 t=038: TheDeviceManagerSingleton::setupDevice(void)
##P3 t=038: TheDeviceManagerSingleton::readFromConfigFile()
##P4 t=038: read PPP port from config: '/dev/ttyUSB0'.
##P4 t=038: read AT port from config: '/dev/ttyUSB2'.
##P4 t=038: read device type from config: 0x600A1000
##P3 t=038: Complete config read from file - good
##P3 t=038: Start iterating through all AutoDetectors##P4 t=038: Kernel: 'Linux version 2.6.27.21-0.1-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-03-31 14:50:44 +0200'
##P3 t=038: AutoDetectBase::go() for 'Device creation from supplied parameters'
##P3 t=038: AutoDetectBase::createDevice() for Device 600a1000
##P3 t=038: Device creation for type 0x600a1000 requested
##P2 t=038: Profile::Profile('')
##P2 t=038: finally created profile for 'vodafone'
##P3 t=038: MonthlyTraffic::save()
##P2 t=038: Profile::Profile('')
##P2 t=038: finally created profile for 'vodafone'
##P3 t=038: Device: probing port '/dev/ttyUSB0' for AT commands
##P3 t=038: TempSerialPort::TempSerialPort()
##P3 t=038: Opened '/dev/ttyUSB0' as FD 8
##P4 t=038: Query sends the following mesage: 'AT'
##P4 t=038: answer 1:'AT'
##P4 t=038: answer 2:'OK'
##P3 t=038: Got Query::OK from port
##P3 t=038: Device: probing port '/dev/ttyUSB0' successful
##P3 t=038: TempSerialPort::~TempSerialPort()
##P3 t=038: SerialPort::closeDev() for FD 8
##P3 t=038: Device: probing port '/dev/ttyUSB2' for AT commands
##P3 t=038: TempSerialPort::TempSerialPort()
##P3 t=038: Opened '/dev/ttyUSB2' as FD 8
##P2 t=038: QUERY: excess bytes received: 'ACSQ\xd\xd\xa+CSQ: 22,99\xd\xa\xd\xaOK\xd\xa'
##P4 t=038: Query sends the following mesage: 'AT'
##P4 t=039: answer 1:'AT'
##P4 t=039: answer 2:'OK'
##P3 t=039: Got Query::OK from port
##P3 t=039: Device: probing port '/dev/ttyUSB2' successful
##P3 t=039: TempSerialPort::~TempSerialPort()
##P3 t=039: SerialPort::closeDev() for FD 8
##P3 t=039: set AT serial to '/dev/ttyUSB2'
##P3 t=039: set PPP serial to '/dev/ttyUSB0'
##P3 t=039: Opened '/dev/ttyUSB2' as FD 8
##P2 t=039: GOOD: 'Device created successfully'
##P2 t=039: Using existing hardware config, not written to disk
##P3 t=039: Everything done - device created##P3 t=039: HelperList::testAndRun(void)
##P3 t=039: HelperList::createHelperList()
##P3 t=039: INSIDE CHILD, uid=1000, pid=20336
##P3 t=039: INSIDE PARENT, uid=1000, pid=19618
##P3 t=039: HelperList::needsFixing
##P3 t=039: HelperList::~HelperList
##P2 t=039:UIState::setState(1 -> 3)
##P4 t=039: SIMHandler::askForPIN() has been called
##P4 t=040: Query sends the following mesage: 'AT+CPIN?'
##P4 t=040: answer 1:'AT+CPIN?'
##P4 t=040: answer 2:'+CPIN: READY'
##P4 t=040: answer 3:'OK'
##P4 t=040: SIMHandler::isPINProtectionEnabled
##P4 t=040: Query sends the following mesage: 'AT+CLCK="SC",2'
##P4 t=040: answer 1:'AT+CLCK="SC",2'
##P4 t=040: answer 2:'+CLCK: 1'
##P4 t=040: answer 3:'OK'
##P2 t=040:UIState::setState(3 -> 4)
##P2 t=041: ***UIState::update(void), state=4
##P4 t=041: ConnectionInfo::refreshSignalQuality(void)
##P4 t=041: Query sends the following mesage: 'AT+CSQ'
##P4 t=041: answer 1:'AT+CSQ'
##P4 t=041: answer 2:'+CSQ: 22,99'
##P4 t=041: answer 3:'OK'
##P3 t=041: ConnectionInfo::refreshPPPStats
##P2 t=044: ***UIState::update(void), state=4
##P4 t=044: ConnectionInfo::refreshSignalQuality(void)
##P4 t=044: Query sends the following mesage: 'AT+CSQ'
##P4 t=044: answer 1:'AT+CSQ'
##P4 t=044: answer 2:'+CSQ: 22,99'
##P4 t=044: answer 3:'OK'
##P4 t=044: ConnectionInfo::refreshOperator(void)
##P4 t=044: Query sends the following mesage: 'AT+COPS?'
##P4 t=044: answer 1:'AT+COPS?'
##P4 t=044: answer 2:'+COPS: 0,2,"26202",2'
##P4 t=044: answer 3:'OK'
##P3 t=044: ConnectionInfo::refreshPPPStats
##P2 t=044:UIState::setState(4 -> 5)
##P2 t=047: ***UIState::update(void), state=5
##P4 t=047: ConnectionInfo::refreshSignalQuality(void)
##P2 t=047: QUERY: excess bytes received: '\xd\xa^BOOT:27903155,0,0,0,72\xd\xa'
##P4 t=047: Query sends the following mesage: 'AT+CSQ'
##P4 t=047: answer 1:'AT+CSQ'
##P4 t=047: answer 2:'+CSQ: 22,99'
##P4 t=047: answer 3:'OK'
##P4 t=047: ConnectionInfo::refreshOperator(void)
##P4 t=047: Query sends the following mesage: 'AT+COPS?'
##P4 t=047: answer 1:'AT+COPS?'
##P4 t=047: answer 2:'+COPS: 0,2,"26202",2'
##P4 t=047: answer 3:'OK'
##P3 t=047: ConnectionInfo::refreshPPPStats
##P3 t=049: umtsmonmain::ConnectPPP
##P2 t=049: -
Zitat
UIState::setState(5 -> 6)
##P2 t=049: Profile::Profile('')
##P2 t=049: finally created profile for 'vodafone'
##P3 t=049: PPPConnection::startPPP entry
##P3 t=049: PPPConnection::setNewPPPState state 0 to 1
##P2 t=049: UIState::newPPPState(1) callback called
##P2 t=049:UIState::setState(6 -> 6)
##P3 t=049: PPPConnection::chat() start
##P3 t=049: CHAT is supposed to go over the PPP port.
##P3 t=049: TempSerialPort::TempSerialPort()
##P3 t=050: Opened '/dev/ttyUSB0' as FD 10
##P4 t=050: Query sends the following mesage: 'AT&F'
##P4 t=050: answer 1:'AT&F'
##P4 t=050: answer 2:'OK'
##P4 t=050: Query sends the following mesage: 'ATE1'
##P4 t=050: answer 1:'ATE1'
##P4 t=050: answer 2:'OK'
##P4 t=050: Query sends the following mesage: 'AT+CGDCONT=1,"IP","web.vodafone.de"'
##P4 t=050: answer 1:'AT+CGDCONT=1,"IP","web.vodafone.de"'
##P4 t=050: answer 2:'OK'
##P3 t=050: Dial String is: ATD*99***1#
##P4 t=051: Query sends the following mesage: 'ATD*99***1#'
##P4 t=051: answer 1:'ATD*99***1#'
##P4 t=051: answer 2:'CONNECT'
##P3 t=051: PPPConnection::chat() end
##P3 t=051: TempSerialPort::~TempSerialPort()
##P3 t=051: SerialPort::closeDev() for FD 10
##P4 t=051: Assembled PPP string is: 'idle 7200 asyncmap 0 updetach dump debug debug debug 460800 lock crtscts modem /dev/ttyUSB0 noipx novj defaultroute usepeerdns '
##P4 t=051: ConnectionInfo:InhibitionCount ++, now is 1
##P2 t=051: PPPConnection::PPPThread::PPPThread()
##P2 t=051: PPPThread::run, before runCommand
##P3 t=051: INSIDE CHILD, uid=1000, pid=22420
##P3 t=051: INSIDE PARENT, uid=1000, pid=19618
##P2 t=052: thePPPConnection.startPPP() returned without indicating problems
##P3 t=052: PPPDThread still running
##P2 t=052: ***UIState::update(void), state=6
##P3 t=052: PPPDThread still running
##P4 t=052: ConnectionInfo::refreshSignalQuality(void)
##P3 t=052: ConnectionInfo probe inhibited
##P3 t=052: ConnectionInfo probe inhibited
##P3 t=052: ConnectionInfo::refreshPPPStats
##P2 t=052: PPPThread::run, after runCommand
##P2 t=053: isDone is true
##P3 t=053: PPPConnection::setNewPPPState state 1 to 4
##P2 t=053: UIState::newPPPState(4) callback called
##P2 t=053:UIState::setState(6 ->
##P2 t=053: ***UIState::update(void), state=8
##P3 t=053: PPPConnection::setNewPPPState state 4 to 0
##P2 t=053: UIState::newPPPState(0) callback called
##P2 t=053:UIState::setState(8 -> 5)
##P4 t=053: ConnectionInfo::refreshSignalQuality(void)
##P3 t=053: ConnectionInfo probe inhibited
##P3 t=053: ConnectionInfo::refreshPPPStats
##P2 t=056: ***UIState::update(void), state=5
##P4 t=056: ConnectionInfo::refreshSignalQuality(void)
##P3 t=056: ConnectionInfo probe inhibited
##P3 t=056: ConnectionInfo::refreshPPPStats
##P2 t=056: UIState::newPPPState(0) callback called
##P2 t=056:UIState::setState(5 -> 5)
##P3 t=056: thread end - wait and cleanup
##P2 t=056: ~PPPThread()
##P4 t=056: ConnectionInfo:InhibitionCount --, now is 0
##P2 t=057: ***UIState::update(void), state=5
##P4 t=057: ConnectionInfo::refreshSignalQuality(void)
##P4 t=057: Query sends the following mesage: 'AT+CSQ'
##P4 t=075: answer 1:'^BOOT:27903155,0,0,0,72'
GetötetUnd nach der Fehlermeldung stürzt umtsmon bei mir auch ab und wird wie man lesen kann einfach gekillt.
Edit:
Ich lese immer öfter, dass man den KNetworkManager am besten garnicht benutzt sondern das normale Netzwerkmanagement von Yast. Seht ihr das auch so? -
Hallo,
ZitatIch lese immer öfter, dass man den KNetworkManager am besten garnicht benutzt sondern das normale Netzwerkmanagement von Yast. Seht ihr das auch so?
Nee, also das kann ich nicht bestätigen.
-
Gut, weil mir machte das Programm auch einen recht brauchbaren Eindruck. Aber mal abwarten was sich in dem Ganzen hier noch entwickelt. Wer kann denn mit dem Log etwas anfangen?
-
aja hallo leuts
umts über networkmanager? das hätt ich auch gern! zigmal probiert und nix funkt! bei mir gehts nur über umtsmon (für alle dies noch net wissen-das programm findet nur was und funktioniert nur wenn man es als !!root!! startet-oder hat s da was an änderungen gegeben?) muß mal sehen, repository von linuxsusefan probieren - s gibt da noch n repo für umtsmon direkt bei sourgeforce.net, ist ein cvs-repo (cvs - Current Versioning System oder so ähnlich)
ifup braucht man mein ich auch nur um eben einstellungen vorzunehmen im networkmanager oder? bei mir zeigte mal der networkman. an neben dem modemcontroller daß da noch n AT modem ist, sogar der richtige anschluß über dev/ttyUSB0, konfigurieren ging noch nur keine verbindung wollt er aufbauen...
gruß felix -
ups hier is die letzte seite:-)
okay -v4 bzw -v5 hab ich auch schon probiert, schlauer bin ich auch nich
versuch mal den stick vor dem hochfahren zu stöpseln dann als root anmelden, im networkman. auf ifup setzen und dann erst umtsmon starten, vielleicht vorher noch usb_modeswitch machen...wenn ich bei mir wieder von ifup zurück auf automatisch stelle will umtsmon auch keine ppp verbindung aufbauen...soviel sei noch gesagt, umtsmon ist nicht gerade das stabilste programm(vers. 0.9.2blabla)...habe öfter probleme damit und !!muß!! dann absolut !!alles platt machen!! und wieder ne neue installation machen.habe jetz ne neuere version (0.9.5blabla) war auf der distri-dvd mit drauf.hoffe es geht jetz besser.bei sourgeforce.net für umtsmon gibts mein ich schon die vers. 0.10. oder so.
gruß felix