[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.9-1.4-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4) [ 0.000000] Command line: root=/dev/disk/by-id/ata-Maxtor_2F040L0_F1CX2PQE-part2 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/disk/by-id/ata-Maxtor_2F040L0_F1CX2PQE-part1 splash=silent quiet vga=0x31a [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfdf0000 (usable) [ 0.000000] BIOS-e820: 00000000bfdf0000 - 00000000bfdf3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfdf3000 - 00000000bfe00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA770T-UD3/GA-MA770T-UD3, BIOS F10 03/22/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 3 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 4 base 000200000000 mask FFFFC0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000240000000 aka 9216M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5380] f5380 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfdf0000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bfc00000 page 2M [ 0.000000] 00bfc00000 - 00bfdf0000 page 4k [ 0.000000] kernel direct mapping tables up to bfdf0000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] 0100000000 - 0240000000 page 1G [ 0.000000] kernel direct mapping tables up to 240000000 @ bfdef000-bfdf0000 [ 0.000000] RAMDISK: 3741b000 - 37ff0000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [000000023ffec000 - 000000023fffffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237600000-ffff88023e5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfdf0 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2096511 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767528 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfdf0000 - 00000000bfdf3000 [ 0.000000] PM: Registered nosave memory: 00000000bfdf3000 - 00000000bfe00000 [ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fc00000 s78208 r8192 d24192 u1048576 [ 0.000000] pcpu-alloc: s78208 r8192 d24192 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064250 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-Maxtor_2F040L0_F1CX2PQE-part2 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/disk/by-id/ata-Maxtor_2F040L0_F1CX2PQE-part1 splash=silent quiet vga=0x31a [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ dfc000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 8110972k/9437184k available (5797k kernel code, 1051140k absent, 275072k reserved, 7771k data, 940k init) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3214.491 MHz processor. [ 0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.98 BogoMIPS (lpj=3214491) [ 0.002005] pid_max: default: 32768 minimum: 301 [ 0.002042] Security Framework initialized [ 0.002051] AppArmor: AppArmor initialized [ 0.003127] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.005050] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005880] Mount-cache hash table entries: 256 [ 0.005967] Initializing cgroup subsys cpuacct [ 0.005971] Initializing cgroup subsys memory [ 0.005983] Initializing cgroup subsys devices [ 0.005985] Initializing cgroup subsys freezer [ 0.005986] Initializing cgroup subsys net_cls [ 0.005988] Initializing cgroup subsys blkio [ 0.006010] Initializing cgroup subsys perf_event [ 0.006029] tseg: 00bff00000 [ 0.006031] CPU: Physical Processor ID: 0 [ 0.006032] CPU: Processor Core ID: 0 [ 0.006033] using AMD E400 aware idle routine [ 0.006610] ExtINT not setup in hardware but reported by MP table [ 0.006999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.017038] CPU0: AMD Athlon(tm) II X2 260 Processor stepping 03 [ 0.119003] Performance Events: AMD PMU driver. [ 0.119007] ... version: 0 [ 0.119008] ... bit width: 48 [ 0.119009] ... generic registers: 4 [ 0.119010] ... value mask: 0000ffffffffffff [ 0.119011] ... max period: 00007fffffffffff [ 0.119012] ... fixed-purpose events: 0 [ 0.119013] ... event mask: 000000000000000f [ 0.119035] System has AMD C1E enabled [ 0.119045] Switch to broadcast mode on CPU0 [ 0.127309] NMI watchdog enabled, takes one hw-pmu counter. [ 0.135030] Booting Node 0, Processors #1 Ok. [ 0.135033] smpboot cpu 1: start_ip = 9a000 [ 0.206996] Switch to broadcast mode on CPU1 [ 0.207012] NMI watchdog enabled, takes one hw-pmu counter. [ 0.209004] Brought up 2 CPUs [ 0.209007] Total of 2 processors activated (12857.13 BogoMIPS). [ 0.209379] devtmpfs: initialized [ 0.210918] PM: Registering ACPI NVS region at bfdf0000 (12288 bytes) [ 0.211081] print_constraints: dummy: [ 0.211105] RTC time: 20:22:53, date: 02/29/12 [ 0.211142] NET: Registered protocol family 16 [ 0.211225] node 0 link 0: io port [c000, ffff] [ 0.211227] TOM: 00000000c0000000 aka 3072M [ 0.211228] Fam 10h mmconf [e0000000, e00fffff] [ 0.211229] node 0 link 0: mmio [a0000, bffff] [ 0.211231] node 0 link 0: mmio [c0000000, dfffffff] [ 0.211233] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.211235] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.211237] TOM2: 0000000240000000 aka 9216M [ 0.211239] bus: [00, 03] on node 0 link 0 [ 0.211240] bus: 00 index 0 [io 0x0000-0xffff] [ 0.211242] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.211243] bus: 00 index 2 [mem 0xc0000000-0xdfffffff] [ 0.211244] bus: 00 index 3 [mem 0xe0400000-0xffffffff] [ 0.211245] bus: 00 index 4 [mem 0xe0100000-0xe03fffff] [ 0.211247] bus: 00 index 5 [mem 0x240000000-0xfcffffffff] [ 0.211255] Extended Config Space enabled on 1 nodes [ 0.211359] PCI: Using configuration type 1 for base access [ 0.211360] PCI: Using configuration type 1 for extended access [ 0.212015] bio: create slab at 0 [ 0.212040] ACPI: Interpreter disabled. [ 0.212051] vgaarb: loaded [ 0.212104] SCSI subsystem initialized [ 0.212109] libata version 3.00 loaded. [ 0.212109] usbcore: registered new interface driver usbfs [ 0.212109] usbcore: registered new interface driver hub [ 0.212109] usbcore: registered new device driver usb [ 0.212109] PCI: Probing PCI hardware [ 0.212109] PCI: Probing PCI hardware (bus 00) [ 0.212109] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600 [ 0.212109] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.212109] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604 [ 0.212109] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.212109] pci 0000:00:02.0: PME# disabled [ 0.212109] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604 [ 0.212128] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.212130] pci 0000:00:0a.0: PME# disabled [ 0.212154] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.212171] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.212180] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.212188] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.212197] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.212205] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.212214] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.212232] pci 0000:00:11.0: set SATA to AHCI mode [ 0.212263] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.212275] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.212333] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.212345] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.212345] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.212345] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] [ 0.212345] pci 0000:00:12.2: supports D1 D2 [ 0.212345] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.212345] pci 0000:00:12.2: PME# disabled [ 0.212345] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.212345] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] [ 0.212345] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.212345] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.212345] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.212345] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] [ 0.212383] pci 0000:00:13.2: supports D1 D2 [ 0.212384] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.212388] pci 0000:00:13.2: PME# disabled [ 0.212410] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.212494] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.212509] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.212518] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.212526] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.212535] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.212543] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] [ 0.212588] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.212607] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.212660] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.212663] pci 0000:00:14.2: PME# disabled [ 0.212675] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.212744] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.212780] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.212793] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] [ 0.212853] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.212864] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.212874] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.212884] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.212895] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.212911] PCI: peer root bus 00 res updated from pci conf [ 0.212941] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300 [ 0.212949] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.212958] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.212967] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.212984] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f] [ 0.212990] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.215013] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.215018] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.215021] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.215024] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.215063] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.215075] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] [ 0.215094] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.215106] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.215141] pci 0000:02:00.0: supports D1 D2 [ 0.215142] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215146] pci 0000:02:00.0: PME# disabled [ 0.217015] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.217019] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.217022] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.217025] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.217065] pci 0000:03:06.0: [1106:3044] type 0 class 0x000c00 [ 0.217088] pci 0000:03:06.0: reg 10: [mem 0xfdeff000-0xfdeff7ff] [ 0.217099] pci 0000:03:06.0: reg 14: [io 0xcf00-0xcf7f] [ 0.217177] pci 0000:03:06.0: supports D2 [ 0.217178] pci 0000:03:06.0: PME# supported from D2 D3hot D3cold [ 0.217183] pci 0000:03:06.0: PME# disabled [ 0.217202] pci 0000:03:07.0: [1106:3038] type 0 class 0x000c03 [ 0.217260] pci 0000:03:07.0: reg 20: [io 0xce00-0xce1f] [ 0.217300] pci 0000:03:07.0: supports D1 D2 [ 0.217301] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217305] pci 0000:03:07.0: PME# disabled [ 0.217324] pci 0000:03:07.1: [1106:3038] type 0 class 0x000c03 [ 0.217381] pci 0000:03:07.1: reg 20: [io 0xcd00-0xcd1f] [ 0.217422] pci 0000:03:07.1: supports D1 D2 [ 0.217423] pci 0000:03:07.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217427] pci 0000:03:07.1: PME# disabled [ 0.217445] pci 0000:03:07.2: [1106:3104] type 0 class 0x000c03 [ 0.217465] pci 0000:03:07.2: reg 10: [mem 0xfdefe000-0xfdefe0ff] [ 0.217543] pci 0000:03:07.2: supports D1 D2 [ 0.217544] pci 0000:03:07.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217548] pci 0000:03:07.2: PME# disabled [ 0.217583] pci 0000:03:0e.0: [104c:8024] type 0 class 0x000c00 [ 0.217604] pci 0000:03:0e.0: reg 10: [mem 0xfdefd000-0xfdefd7ff] [ 0.217616] pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff] [ 0.217691] pci 0000:03:0e.0: supports D1 D2 [ 0.217692] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.217696] pci 0000:03:0e.0: PME# disabled [ 0.217727] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.217731] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.217734] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.217738] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.217739] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.217741] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.217743] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.217744] pci 0000:00:14.4: bridge window [mem 0xe0400000-0xffffffff] (subtractive decode) [ 0.217746] pci 0000:00:14.4: bridge window [mem 0xe0100000-0xe03fffff] (subtractive decode) [ 0.217748] pci 0000:00:14.4: bridge window [mem 0x240000000-0xfcffffffff] (subtractive decode) [ 0.218155] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.218619] PCI: pci_cache_line_size set to 64 bytes [ 0.218624] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.218698] Expanded resource reserved due to conflict with PCI Bus #00 [ 0.218700] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.218702] reserve RAM buffer: 00000000bfdf0000 - 00000000bfffffff [ 0.218777] NetLabel: Initializing [ 0.218778] NetLabel: domain hash size = 128 [ 0.218779] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.218787] NetLabel: unlabeled traffic allowed by default [ 0.220703] AppArmor: AppArmor Filesystem Enabled [ 0.220719] pnp: PnP ACPI: disabled [ 0.223042] PCI: max bus depth: 1 pci_try_num: 2 [ 0.223061] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref] [ 0.223063] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.223065] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.223068] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.223070] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.223073] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.223075] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff] [ 0.223077] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.223079] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.223084] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.223086] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.223090] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff] [ 0.223094] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref] [ 0.223110] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.223113] pci 0000:00:02.0: setting latency timer to 64 [ 0.223116] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.223118] pci 0000:00:0a.0: setting latency timer to 64 [ 0.223125] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.223127] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.223128] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xdfffffff] [ 0.223130] pci_bus 0000:00: resource 7 [mem 0xe0400000-0xffffffff] [ 0.223131] pci_bus 0000:00: resource 8 [mem 0xe0100000-0xe03fffff] [ 0.223133] pci_bus 0000:00: resource 9 [mem 0x240000000-0xfcffffffff] [ 0.223135] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.223136] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.223138] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.223139] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.223141] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.223142] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.223144] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.223146] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.223147] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref] [ 0.223149] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.223150] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff] [ 0.223152] pci_bus 0000:03: resource 6 [mem 0xc0000000-0xdfffffff] [ 0.223153] pci_bus 0000:03: resource 7 [mem 0xe0400000-0xffffffff] [ 0.223155] pci_bus 0000:03: resource 8 [mem 0xe0100000-0xe03fffff] [ 0.223156] pci_bus 0000:03: resource 9 [mem 0x240000000-0xfcffffffff] [ 0.223202] NET: Registered protocol family 2 [ 0.223368] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.223539] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.225291] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.225512] TCP: Hash tables configured (established 524288 bind 65536) [ 0.225513] TCP reno registered [ 0.225525] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.225569] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.225692] NET: Registered protocol family 1 [ 0.560982] pci 0000:01:00.0: Boot video device [ 0.561057] PCI: CLS 64 bytes, default 64 [ 0.561095] Unpacking initramfs... [ 0.714955] Freeing initrd memory: 12116k freed [ 0.720955] PCI-DMA: Disabling AGP. [ 0.722662] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 0.722663] PCI-DMA: using GART IOMMU. [ 0.722665] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.724929] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.726000] audit: initializing netlink socket (disabled) [ 0.726000] type=2000 audit(1330546972.725:1): initialized [ 0.741934] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.746012] VFS: Disk quotas dquot_6.5.2 [ 0.746046] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.746200] msgmni has been set to 15994 [ 0.746917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.746922] io scheduler noop registered [ 0.746922] io scheduler deadline registered [ 0.746924] io scheduler cfq registered (default) [ 0.749910] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.749937] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.750000] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.750000] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X [ 0.750000] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt [ 0.750000] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.750000] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded [ 0.750026] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.750027] vesafb: scrolling: redraw [ 0.750029] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.750381] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90001780000, using 5120k, total 14336k [ 0.750408] bootsplash 3.2.0-2010/03/31: looking for picture... [ 0.750408] bootsplash: silentjpeg size 109002 bytes [ 0.760075] bootsplash: ...found (1280x1024, 40442 bytes, v3). [ 0.791344] Console: switching to colour frame buffer device 156x60 [ 0.822193] fb0: VESA VGA frame buffer device [ 0.822913] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.822913] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.848990] Non-volatile memory driver v1.3 [ 0.848990] Linux agpgart interface v0.103 [ 0.851890] ahci 0000:00:11.0: version 3.0 [ 0.851910] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 0.852014] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.852017] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 0.852364] scsi0 : ahci [ 0.852364] scsi1 : ahci [ 0.852364] scsi2 : ahci [ 0.852364] scsi3 : ahci [ 0.852364] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.852364] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.852364] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.852364] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 0.852364] Fixed MDIO Bus: probed [ 0.852364] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.854920] ehci_hcd 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 0.854940] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.854968] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.854976] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.855002] ehci_hcd 0000:00:12.2: debug port 1 [ 0.855024] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.860906] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.860927] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.860928] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.860930] usb usb1: Product: EHCI Host Controller [ 0.860931] usb usb1: Manufacturer: Linux 3.1.9-1.4-desktop ehci_hcd [ 0.860933] usb usb1: SerialNumber: 0000:00:12.2 [ 0.860953] hub 1-0:1.0: USB hub found [ 0.860953] hub 1-0:1.0: 6 ports detected [ 0.861014] ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 0.861014] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.861014] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.861014] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.861014] ehci_hcd 0000:00:13.2: debug port 1 [ 0.861014] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.866905] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.866929] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.866930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.866932] usb usb2: Product: EHCI Host Controller [ 0.866933] usb usb2: Manufacturer: Linux 3.1.9-1.4-desktop ehci_hcd [ 0.866935] usb usb2: SerialNumber: 0000:00:13.2 [ 0.866955] hub 2-0:1.0: USB hub found [ 0.866955] hub 2-0:1.0: 6 ports detected [ 0.867010] ehci_hcd 0000:03:07.2: PCI->APIC IRQ transform: INT C -> IRQ 23 [ 0.867010] ehci_hcd 0000:03:07.2: EHCI Host Controller [ 0.867010] ehci_hcd 0000:03:07.2: new USB bus registered, assigned bus number 3 [ 0.867010] ehci_hcd 0000:03:07.2: irq 23, io mem 0xfdefe000 [ 0.872904] ehci_hcd 0000:03:07.2: USB 2.0 started, EHCI 1.00 [ 0.872924] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.872926] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.872928] usb usb3: Product: EHCI Host Controller [ 0.872929] usb usb3: Manufacturer: Linux 3.1.9-1.4-desktop ehci_hcd [ 0.872930] usb usb3: SerialNumber: 0000:03:07.2 [ 0.872950] hub 3-0:1.0: USB hub found [ 0.872950] hub 3-0:1.0: 4 ports detected [ 0.872988] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.873009] ohci_hcd 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.873009] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.873009] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.873009] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 0.927939] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.927941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.927943] usb usb4: Product: OHCI Host Controller [ 0.927944] usb usb4: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd [ 0.927946] usb usb4: SerialNumber: 0000:00:12.0 [ 0.927969] hub 4-0:1.0: USB hub found [ 0.927969] hub 4-0:1.0: 3 ports detected [ 0.928002] ohci_hcd 0000:00:12.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.928002] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 0.928002] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 5 [ 0.928002] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 0.982929] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.982932] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.982934] usb usb5: Product: OHCI Host Controller [ 0.982935] usb usb5: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd [ 0.982936] usb usb5: SerialNumber: 0000:00:12.1 [ 0.982959] hub 5-0:1.0: USB hub found [ 0.982959] hub 5-0:1.0: 3 ports detected [ 0.982992] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.982992] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.982992] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6 [ 0.982992] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.037921] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.037923] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.037925] usb usb6: Product: OHCI Host Controller [ 1.037926] usb usb6: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd [ 1.037928] usb usb6: SerialNumber: 0000:00:13.0 [ 1.037951] hub 6-0:1.0: USB hub found [ 1.037951] hub 6-0:1.0: 3 ports detected [ 1.037986] ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 1.037986] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.037986] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7 [ 1.037986] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.092916] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.092919] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.092920] usb usb7: Product: OHCI Host Controller [ 1.092922] usb usb7: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd [ 1.092923] usb usb7: SerialNumber: 0000:00:13.1 [ 1.092946] hub 7-0:1.0: USB hub found [ 1.092946] hub 7-0:1.0: 3 ports detected [ 1.092977] ohci_hcd 0000:00:14.5: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 1.092977] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.092977] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 1.092977] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.147905] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.147908] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.147910] usb usb8: Product: OHCI Host Controller [ 1.147911] usb usb8: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd [ 1.147913] usb usb8: SerialNumber: 0000:00:14.5 [ 1.147936] hub 8-0:1.0: USB hub found [ 1.147936] hub 8-0:1.0: 2 ports detected [ 1.147943] uhci_hcd: USB Universal Host Controller Interface driver [ 1.147964] uhci_hcd 0000:03:07.0: PCI->APIC IRQ transform: INT A -> IRQ 21 [ 1.147964] uhci_hcd 0000:03:07.0: UHCI Host Controller [ 1.147964] uhci_hcd 0000:03:07.0: new USB bus registered, assigned bus number 9 [ 1.147964] uhci_hcd 0000:03:07.0: irq 21, io base 0x0000ce00 [ 1.147964] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.147964] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.147964] usb usb9: Product: UHCI Host Controller [ 1.147964] usb usb9: Manufacturer: Linux 3.1.9-1.4-desktop uhci_hcd [ 1.147964] usb usb9: SerialNumber: 0000:03:07.0 [ 1.147964] hub 9-0:1.0: USB hub found [ 1.147964] hub 9-0:1.0: 2 ports detected [ 1.147964] uhci_hcd 0000:03:07.1: PCI->APIC IRQ transform: INT B -> IRQ 22 [ 1.147964] uhci_hcd 0000:03:07.1: UHCI Host Controller [ 1.147964] uhci_hcd 0000:03:07.1: new USB bus registered, assigned bus number 10 [ 1.147964] uhci_hcd 0000:03:07.1: irq 22, io base 0x0000cd00 [ 1.147964] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.147964] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.147964] usb usb10: Product: UHCI Host Controller [ 1.147964] usb usb10: Manufacturer: Linux 3.1.9-1.4-desktop uhci_hcd [ 1.147964] usb usb10: SerialNumber: 0000:03:07.1 [ 1.147964] hub 10-0:1.0: USB hub found [ 1.147964] hub 10-0:1.0: 2 ports detected [ 1.147964] Initializing USB Mass Storage driver... [ 1.147964] usbcore: registered new interface driver usb-storage [ 1.147964] USB Mass Storage support registered. [ 1.147964] usbcore: registered new interface driver ums-alauda [ 1.147964] usbcore: registered new interface driver ums-cypress [ 1.147964] usbcore: registered new interface driver ums-datafab [ 1.147964] usbcore: registered new interface driver ums-freecom [ 1.147964] usbcore: registered new interface driver ums-isd200 [ 1.147964] usbcore: registered new interface driver ums-jumpshot [ 1.147964] usbcore: registered new interface driver ums-karma [ 1.147968] usbcore: registered new interface driver ums-onetouch [ 1.147975] usbcore: registered new interface driver ums-sddr09 [ 1.147982] usbcore: registered new interface driver ums-sddr55 [ 1.147989] usbcore: registered new interface driver ums-usbat [ 1.148007] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.155110] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.155111] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 1.156879] ata3: SATA link down (SStatus 0 SControl 300) [ 1.156914] ata1: SATA link down (SStatus 0 SControl 300) [ 1.157875] ata4: SATA link down (SStatus 0 SControl 300) [ 1.212893] usb 2-5: new high speed USB device number 2 using ehci_hcd [ 1.310884] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.319835] ata2.00: ATAPI: HL-DT-ST BD-RE BH10LS38, 1.00, max UDMA/133 [ 1.323837] ata2.00: configured for UDMA/133 [ 1.328831] usb 2-5: New USB device found, idVendor=050d, idProduct=0307 [ 1.328834] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 1.328836] usb 2-5: Product: USB 2.0 Hub [MTT] [ 1.328837] usb 2-5: SerialNumber: 001 [ 1.328870] hub 2-5:1.0: USB hub found [ 1.328881] hub 2-5:1.0: 7 ports detected [ 1.332845] scsi 1:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS38 1.00 PQ: 0 ANSI: 5 [ 1.404896] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.405828] mousedev: PS/2 mouse device common for all mice [ 1.405911] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.405911] rtc0: alarms up to one day, 114 bytes nvram [ 1.405911] cpuidle: using governor ladder [ 1.405911] cpuidle: using governor menu [ 1.405911] EFI Variables Facility v0.08 2004-May-17 [ 1.406023] usbcore: registered new interface driver usbhid [ 1.406024] usbhid: USB HID core driver [ 1.406170] TCP cubic registered [ 1.406207] NET: Registered protocol family 10 [ 1.406973] lib80211: common routines for IEEE802.11 drivers [ 1.406974] lib80211_crypt: registered algorithm 'NULL' [ 1.406976] Registering the dns_resolver key type [ 1.406987] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6) [ 1.407011] PM: Checking hibernation image partition /dev/disk/by-id/ata-Maxtor_2F040L0_F1CX2PQE-part1 [ 1.461799] PM: Hibernation image not present or could not be loaded. [ 1.461823] registered taskstats version 1 [ 1.464016] Magic number: 0:101:398 [ 1.464826] rtc_cmos rtc_cmos: setting system clock to 2012-02-29 20:22:54 UTC (1330546974) [ 1.465858] Freeing unused kernel memory: 940k freed [ 1.466018] Write protecting the kernel read-only data: 12288k [ 1.466861] Freeing unused kernel memory: 328k freed [ 1.471503] Freeing unused kernel memory: 2016k freed [ 1.503807] usb 5-2: new low speed USB device number 2 using ohci_hcd [ 1.507796] pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.508019] scsi4 : pata_atiixp [ 1.508019] scsi5 : pata_atiixp [ 1.508019] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.508019] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.654791] usb 5-2: New USB device found, idVendor=046d, idProduct=c517 [ 1.654794] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.654796] usb 5-2: Product: USB Receiver [ 1.654797] usb 5-2: Manufacturer: Logitech [ 1.662946] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb5/5-2/5-2:1.0/input/input0 [ 1.662977] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.1-2/input0 [ 1.667803] ata5.00: ATA-8: WDC WD1600AAJB-00J3A0, 01.03E01, max UDMA/133 [ 1.667806] ata5.00: 312581808 sectors, multi 16: LBA48 [ 1.667881] ata5.01: ATA-7: Maxtor 2F040L0, VAM51JJ0, max UDMA/133 [ 1.667881] ata5.01: 80293248 sectors, multi 16: LBA [ 1.670786] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 1.671184] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb5/5-2/5-2:1.1/input/input1 [ 1.671216] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-2/input1 [ 1.674137] ata5.00: configured for UDMA/100 [ 1.680132] ata5.01: configured for UDMA/100 [ 1.680143] scsi 4:0:0:0: Direct-Access ATA WDC WD1600AAJB-0 01.0 PQ: 0 ANSI: 5 [ 1.680143] sd 4:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.680143] scsi 4:0:1:0: Direct-Access ATA Maxtor 2F040L0 VAM5 PQ: 0 ANSI: 5 [ 1.680796] sd 4:0:1:0: [sdb] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB) [ 1.680837] sd 4:0:0:0: [sda] Write Protect is off [ 1.680837] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.680850] sd 4:0:1:0: [sdb] Write Protect is off [ 1.680853] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.680863] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.680869] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.703815] sda: sda1 sda2 [ 1.711799] sdb: sdb1 sdb2 sdb3 [ 1.711892] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.712759] sd 4:0:1:0: [sdb] Attached SCSI disk [ 1.718915] udevd[149]: starting version 173 [ 1.732432] Switching to clocksource tsc [ 1.897084] usb 7-3: new low speed USB device number 2 using ohci_hcd [ 2.048325] usb 7-3: New USB device found, idVendor=046d, idProduct=c03e [ 2.048328] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.048330] usb 7-3: Product: USB-PS/2 Optical Mouse [ 2.048332] usb 7-3: Manufacturer: Logitech [ 2.055480] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb7/7-3/7-3:1.0/input/input2 [ 2.055578] generic-usb 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-3/input0 [ 2.118820] usb 2-5.1: new high speed USB device number 4 using ehci_hcd [ 2.197111] usb 2-5.1: New USB device found, idVendor=1bcf, idProduct=0c31 [ 2.197114] usb 2-5.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 2.197116] usb 2-5.1: Product: USB to Serial-ATA bridge [ 2.197118] usb 2-5.1: Manufacturer: Sunplus Innovation Technology. [ 2.197119] usb 2-5.1: SerialNumber: FAFFFFF0FDF1FFFD2FC01675 [ 2.198902] scsi6 : usb-storage 2-5.1:1.0 [ 2.261939] usb 2-5.2: new high speed USB device number 5 using ehci_hcd [ 2.455546] usb 2-5.2: New USB device found, idVendor=045e, idProduct=074a [ 2.455549] usb 2-5.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.455551] usb 2-5.2: Product: Microsoft LifeCam [ 2.455553] usb 2-5.2: Manufacturer: Microsoft [ 2.457890] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 2.457894] PM: Marking nosave pages: 00000000bfdf0000 - 0000000100000000 [ 2.458571] PM: Marking nosave pages: 00000000b4000000 - 00000000b8000000 [ 2.459709] PM: Basic memory bitmaps created [ 2.481108] PM: Basic memory bitmaps freed [ 2.521553] usb 2-5.3: new high speed USB device number 6 using ehci_hcd [ 2.564325] PM: Starting manual resume from disk [ 2.564327] PM: Hibernation image partition 8:17 present [ 2.564328] PM: Looking for hibernation image. [ 2.564624] PM: Image not found (code -22) [ 2.564626] PM: Hibernation image not present or could not be loaded. [ 2.596166] usb 2-5.3: New USB device found, idVendor=03f0, idProduct=2504 [ 2.596169] usb 2-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.596171] usb 2-5.3: Product: Deskjet F4200 series [ 2.596173] usb 2-5.3: Manufacturer: HP [ 2.596174] usb 2-5.3: SerialNumber: CN89N2Z17105C3 [ 2.658544] usb 2-5.7: new full speed USB device number 7 using ehci_hcd [ 2.733409] usb 2-5.7: New USB device found, idVendor=03eb, idProduct=3301 [ 2.733412] usb 2-5.7: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.733414] usb 2-5.7: Product: Standard USB Hub [ 2.734175] hub 2-5.7:1.0: USB hub found [ 2.734396] hub 2-5.7:1.0: 4 ports detected [ 2.757022] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 2.999603] EXT4-fs (sdb2): re-mounted. Opts: acl,user_xattr [ 3.008272] usb 2-5.7.2: new full speed USB device number 8 using ehci_hcd [ 3.155135] usb 2-5.7.2: not running at top speed; connect to a high speed hub [ 3.161903] usb 2-5.7.2: New USB device found, idVendor=8564, idProduct=1000 [ 3.161906] usb 2-5.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.161908] usb 2-5.7.2: Product: Mass Storage Device [ 3.161909] usb 2-5.7.2: Manufacturer: JetFlash [ 3.161910] usb 2-5.7.2: SerialNumber: XKYMBT10 [ 3.162256] scsi7 : usb-storage 2-5.7.2:1.0 [ 3.209160] scsi 6:0:0:0: Direct-Access SAMSUNG HD103SI PQ: 0 ANSI: 4 [ 3.210168] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.216530] sd 6:0:0:0: [sdc] Write Protect is off [ 3.216535] sd 6:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 3.222985] sd 6:0:0:0: [sdc] No Caching mode page present [ 3.223048] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 3.224003] usb 2-5.7.3: new full speed USB device number 9 using ehci_hcd [ 3.236776] sd 6:0:0:0: [sdc] No Caching mode page present [ 3.236837] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 3.309501] usb 2-5.7.3: not running at top speed; connect to a high speed hub [ 3.312104] usb 2-5.7.3: New USB device found, idVendor=1516, idProduct=8628 [ 3.312107] usb 2-5.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.312109] usb 2-5.7.3: Product: USB_DRIVE [ 3.312110] usb 2-5.7.3: Manufacturer: CHEER [ 3.312112] usb 2-5.7.3: SerialNumber: 20060303 [ 3.312466] scsi8 : usb-storage 2-5.7.3:1.0 [ 3.756914] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse) [ 4.163783] scsi 7:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2 [ 4.165491] sd 7:0:0:0: [sdd] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB) [ 4.165990] sd 7:0:0:0: [sdd] Write Protect is off [ 4.165994] sd 7:0:0:0: [sdd] Mode Sense: 03 00 00 00 [ 4.166614] sd 7:0:0:0: [sdd] No Caching mode page present [ 4.166676] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 4.169363] sd 7:0:0:0: [sdd] No Caching mode page present [ 4.169424] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 4.312485] scsi 8:0:0:0: Direct-Access CHEER USB_DRIVE 1.00 PQ: 0 ANSI: 2 [ 4.313360] sd 8:0:0:0: [sde] 1033472 512-byte logical blocks: (529 MB/504 MiB) [ 4.313847] sd 8:0:0:0: [sde] Write Protect is off [ 4.313851] sd 8:0:0:0: [sde] Mode Sense: 03 00 00 00 [ 4.314483] sd 8:0:0:0: [sde] No Caching mode page present [ 4.314543] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 4.317481] sd 8:0:0:0: [sde] No Caching mode page present [ 4.317542] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 4.322599] sde: [ 4.325105] sd 8:0:0:0: [sde] No Caching mode page present [ 4.325165] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 4.325224] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 4.421222] sdd: sdd1 [ 4.423743] sd 7:0:0:0: [sdd] No Caching mode page present [ 4.423802] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 4.423860] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 7.255448] sdc: sdc1 [ 7.269442] sd 6:0:0:0: [sdc] No Caching mode page present [ 7.269501] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 7.269559] sd 6:0:0:0: [sdc] Attached SCSI disk [ 7.307726] systemd[1]: Set hostname to . [ 10.211723] systemd-readahead-replay[392]: Bumped block_nr parameter of 8:16 to 16384. This is a temporary hack and should be removed one day. [ 10.468530] udevd[395]: starting version 173 [ 14.799362] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1 [ 14.804340] systemd[1]: Unit systemd-modules-load.service entered failed state. [ 20.825639] bootsplash: status on console 0 changed to on [ 20.826420] boot.localnet[413]: Using boot-specified hostname 'linux-wxdj.site' [ 20.827335] boot.localnet[413]: Setting up hostname 'linux-wxdj'..done [ 20.828156] boot.localnet[413]: Setting up loopback interface RTNETLINK answers: File exists [ 20.829095] boot.localnet[413]: ..done [ 27.110399] MCE: In-kernel MCE decoding enabled. [ 27.120611] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 27.120632] r8169 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 27.120663] r8169 0000:02:00.0: setting latency timer to 64 [ 27.120702] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 27.120994] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc90001cb0000, 1c:6f:65:bd:62:7b, XID 0c200000 IRQ 42 [ 27.126417] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 27.126811] EDAC MC: Ver: 2.1.0 [ 27.129904] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 27.130540] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 27.130596] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 27.130826] AMD64 EDAC driver v3.4.0 [ 27.131958] mtp-probe[528]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:12.1/usb5/5-2" [ 27.132338] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 27.132705] mtp-probe[539]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb7/7-3" [ 27.132742] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 27.133394] sd 4:0:1:0: Attached scsi generic sg2 type 0 [ 27.133573] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 27.133651] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 27.133996] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 27.134468] EDAC amd64: DRAM ECC disabled. [ 27.134499] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable. [ 27.134501] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 27.134502] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 27.134503] (Note that use of the override may cause unknown side effects.) [ 27.135701] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 27.135705] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 27.136166] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 27.147320] firewire_ohci 0000:03:06.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 27.147393] snd_hda_intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 27.147395] ALSA hda_intel.c:2416 Using LPIB position fix [ 27.158529] ALSA hda_intel.c:1492 Enable sync_write for stable communication [ 27.165960] mtp-probe[558]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.1" [ 27.168081] mtp-probe[559]: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.3" [ 27.168570] mtp-probe[560]: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.2" [ 27.178118] ALSA patch_realtek.c:1228 SKU: Nid=0x1d sku_cfg=0x4005e601 [ 27.178121] ALSA patch_realtek.c:1230 SKU: port_connectivity=0x1 [ 27.178122] ALSA patch_realtek.c:1231 SKU: enable_pcbeep=0x0 [ 27.178124] ALSA patch_realtek.c:1232 SKU: check_sum=0x00000005 [ 27.178125] ALSA patch_realtek.c:1233 SKU: customization=0x000000e6 [ 27.178127] ALSA patch_realtek.c:1234 SKU: external_amp=0x0 [ 27.178128] ALSA patch_realtek.c:1235 SKU: platform_type=0x0 [ 27.178129] ALSA patch_realtek.c:1236 SKU: swap=0x0 [ 27.178130] ALSA patch_realtek.c:1237 SKU: override=0x1 [ 27.193392] mtp-probe[587]: checking bus 2, device 8: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.7/2-5.7.2" [ 27.193955] mtp-probe[586]: checking bus 2, device 9: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.7/2-5.7.3" [ 27.199528] firewire_ohci: Added fw-ohci device 0000:03:06.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x11 [ 27.201265] firewire_ohci 0000:03:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 27.224992] ifup[619]: Service network not started and mode 'auto' -> skipping [ 27.251557] firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 27.450634] mtp-probe[539]: bus: 7, device: 2 was not an MTP device [ 27.450641] mtp-probe[528]: bus: 5, device: 2 was not an MTP device [ 27.450717] mtp-probe[558]: bus: 2, device: 4 was not an MTP device [ 27.450868] mtp-probe[559]: bus: 2, device: 6 was not an MTP device [ 27.450958] mtp-probe[560]: bus: 2, device: 5 was not an MTP device [ 27.451107] mtp-probe[587]: bus: 2, device: 8 was not an MTP device [ 27.451186] mtp-probe[586]: bus: 2, device: 9 was not an MTP device [ 27.470520] Linux video capture interface: v2.00 [ 27.470859] uvcvideo: Found UVC 1.00 device Microsoft LifeCam (045e:074a) [ 27.474885] input: Microsoft LifeCam as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.2/2-5.2:1.0/input/input4 [ 27.475149] usbcore: registered new interface driver uvcvideo [ 27.475151] USB Video Class driver (1.1.1) [ 27.478076] ata_id[644]: HDIO_GET_IDENTITY failed for '/dev/sdc': Invalid argument [ 27.505266] WARNING! power/level is deprecated; use power/control instead [ 27.700598] firewire_core: created device fw0: GUID 0011060000000cda, S400 [ 27.752542] firewire_core: created device fw1: GUID 0023a54e006cf049, S400 [ 28.007315] Adding 2103292k swap on /dev/sdb1. Priority:0 extents:1 across:2103292k [ 28.112747] systemd-fsck[711]: /dev/sdb3: sauber, 791/1417216 Dateien, 199329/5660672 Blöcke [ 28.213791] udev-configure-printer[727]: add /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.3/2-5.3:1.1 [ 28.213988] udev-configure-printer[727]: device devpath is /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.3 [ 28.214050] udev-configure-printer[727]: Device vendor/product is 03F0:2504 [ 28.216050] Did not find alt setting 1 for intf 0, config 1 [ 28.216228] udev-configure-printer[727]: MFG:HP MDL:Deskjet F4200 series SERN:CN89N2Z17105C3 serial:CN89N2Z17105C3 [ 28.217569] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2504 [ 28.217812] usbcore: registered new interface driver usblp [ 28.220988] udev-configure-printer[732]: add /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.3/2-5.3:1.1/usb/lp0 [ 28.288718] hdj_probe() unsupported device, idVendor3f0, idProduct:2504 [ 28.288728] hdj_probe() unsupported device, idVendor3f0, idProduct:2504 [ 28.288740] usbcore: registered new interface driver hdj_mod [ 29.034091] EXT4-fs (sdb2): re-mounted. Opts: acl,user_xattr [ 29.085582] fuse init (API version 7.17) [ 29.094726] mount[747]: mount: fusectl ist bereits eingehängt oder /sys/fs/fuse/connections wird gerade benutzt [ 29.094979] mount[747]: mount: Laut mtab ist fusectl schon auf /sys/fs/fuse/connections eingehängt [ 29.095128] systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32 [ 29.131492] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 29.300947] udev-configure-printer[727]: failed to connect to CUPS server; giving up [ 29.301808] udev-configure-printer[732]: device devpath is /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5.3 [ 29.301834] udev-configure-printer[732]: MFG:HP MDL:Deskjet F4200 series SERN:CN89N2Z17105C3 serial:CN89N2Z17105C3 [ 29.466431] ntfs-3g[753]: Version 2011.4.12 integrated FUSE 27 [ 29.466437] ntfs-3g[753]: Mounted /dev/sda2 (Read-Write, label "Windows 7", NTFS 3.1) [ 29.466441] ntfs-3g[753]: Cmdline options: rw,noexec,nosuid,nodev,users,gid=100,fmask=133,dmask=022,locale=de_DE.UTF-8 [ 29.466445] ntfs-3g[753]: Mount options: rw,noexec,nosuid,nodev,users,allow_other,nonempty,atime,fsname=/dev/sda2,blkdev,blksize=4096,default_permissions [ 29.466449] ntfs-3g[753]: Global ownership and permissions enforced, configuration type 1 [ 29.466452] ntfs-3g[753]: Warning : using problematic uid==0 and gid!=0 [ 29.624917] logger[788]: Requesting microcode for AMD fam10h or newer CPU(s) [ 29.626726] microcode: CPU0: patch_level=0x010000c8 [ 29.633406] rc.cpufreq[794]: Cannot load cpufreq governors - No cpufreq driver available [ 29.634097] cpufreq[765]: Loading CPUFreq modules..failed [ 29.665461] microcode: CPU1: patch_level=0x010000c8 [ 29.667893] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 29.668861] microcode.ctl[763]: Checking/updating CPU microcode .. AMD fam10h or newer CPU(s) found..done [ 29.696344] systemd[1]: cpufreq.service: control process exited, code=exited status=1 [ 29.705221] systemd[1]: Unit cpufreq.service entered failed state. [ 29.724806] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 29.729921] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 29.735594] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.838546] systemd[1]: NetworkManager.service: control process exited, code=exited status=1 [ 29.845180] systemd[1]: Job NetworkManager-wait-online.service/start failed with result 'dependency'. [ 29.845191] systemd[1]: Unit NetworkManager.service entered failed state. [ 30.872448] r8169 0000:02:00.0: eth0: link down [ 30.872458] r8169 0000:02:00.0: eth0: link down [ 30.873126] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.388698] r8169 0000:02:00.0: eth0: link up [ 32.389423] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.425028] NET: Registered protocol family 17 [ 43.211249] eth0: no IPv6 routers present [ 66.467013] usb 2-4: new high speed USB device number 10 using ehci_hcd [ 66.585998] usb 2-4: New USB device found, idVendor=090c, idProduct=1000 [ 66.586001] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 66.586003] usb 2-4: Product: USB DISK [ 66.586005] usb 2-4: Manufacturer: SMI Corporation [ 66.586006] usb 2-4: SerialNumber: AA04012700684 [ 66.586456] scsi9 : usb-storage 2-4:1.0 [ 67.587032] scsi 9:0:0:0: Direct-Access USB Flash Disk 3000 PQ: 0 ANSI: 0 CCS [ 67.587224] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 67.588773] sd 9:0:0:0: [sdf] 252928 512-byte logical blocks: (129 MB/123 MiB) [ 67.589652] sd 9:0:0:0: [sdf] Write Protect is off [ 67.589656] sd 9:0:0:0: [sdf] Mode Sense: 43 00 00 00 [ 67.590651] sd 9:0:0:0: [sdf] No Caching mode page present [ 67.590655] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 67.594523] sd 9:0:0:0: [sdf] No Caching mode page present [ 67.594527] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 67.696857] sdf: sdf1 [ 67.699625] sd 9:0:0:0: [sdf] No Caching mode page present [ 67.699629] sd 9:0:0:0: [sdf] Assuming drive cache: write through [ 67.699632] sd 9:0:0:0: [sdf] Attached SCSI removable disk [ 68.451048] EXT4-fs (sdb2): re-mounted. Opts: acl,user_xattr,commit=0 [ 69.160804] EXT4-fs (sdb3): re-mounted. Opts: acl,user_xattr,commit=0