hwinfo --netcard 21: PCI 04.0: 0200 Ethernet controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_1039_900 Unique ID: rBUF.uF4U5g2jiXA SysFS ID: /devices/pci0000:00/0000:00:04.0 SysFS BusID: 0000:00:04.0 Hardware Class: network Model: "Silicon Integrated SiS900 PCI Fast Ethernet" Vendor: pci 0x1039 "Silicon Integrated Systems Corp." Device: pci 0x0900 "SiS900 PCI Fast Ethernet" SubVendor: pci 0x1462 "Micro-Star International Co., Ltd." SubDevice: pci 0x0900 "MS-6701 motherboard" Revision: 0x91 Driver: "sis900" Driver Modules: "sis900" Device File: eth0 I/O Ports: 0xbc00-0xbcff (rw) Memory Range: 0xe8524000-0xe8524fff (rw,non-prefetchable) Memory Range: 0x20020000-0x2003ffff (ro,prefetchable,disabled) IRQ: 19 (no events) HW Address: 00:10:dc:e5:8f:81 Link detected: no Module Alias: "pci:v00001039d00000900sv00001462sd00000900bc02sc00i00" Driver Info #0: Driver Status: sis900 is active Driver Activation Cmd: "modprobe sis900" Config Status: cfg=no, avail=yes, need=no, active=unknown 51: USB 00.0: 0282 WLAN controller [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_148f_3070_1_0_if0 Unique ID: FKGF.i+8+cNT5FUE Parent ID: pBe4.kgWOBFJXxo8 SysFS ID: /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: network Model: "Ralink 802.11 n WLAN" Hotplug: USB Vendor: usb 0x148f "Ralink Technology, Corp." Device: usb 0x3070 "802.11 n WLAN" Revision: "1.01" Serial ID: "1.0" Driver: "rt2800usb" Driver Modules: "rt2800usb" Device File: wlan0 Features: WLAN Speed: 480 Mbps HW Address: 00:1f:1f:62:fd:c0 WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v148Fp3070d0101dc00dsc00dp00icFFiscFFipFF" Driver Info #0: Driver Status: rt2800usb is active Driver Activation Cmd: "modprobe rt2800usb" Driver Info #1: Driver Status: rt2870sta is active Driver Activation Cmd: "modprobe rt2870sta" Driver Info #2: Driver Status: rt3070sta is not active Driver Activation Cmd: "modprobe rt3070sta" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #45 (Hub) linux-ff40:/home/rolf #