wilfried@linux-wfvx:~> su Passwort: linux-wfvx:/home/wilfried # smartctl -H /dev/sda smartctl 6.2 2013-11-07 r3856 [x86_64-linux-4.1.21-14-default] (SUSE RPM) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED linux-wfvx:/home/wilfried # cat /proc/partitions major minor #blocks name 8 0 312571224 sda 8 1 102400 sda1 8 2 83783680 sda2 8 3 76292685 sda3 8 4 1 sda4 8 5 2100808 sda5 8 6 20972826 sda6 8 7 129315186 sda7 11 0 1048575 sr0 8 16 312571224 sdb 8 17 312568641 sdb1 linux-wfvx:/home/wilfried # smartctl --test=short /dev/sda smartctl 6.2 2013-11-07 r3856 [x86_64-linux-4.1.21-14-default] (SUSE RPM) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Wed Jun 8 18:44:12 2016 Use smartctl -X to abort test. linux-wfvx:/home/wilfried # smartctl -a /dev/sda smartctl 6.2 2013-11-07 r3856 [x86_64-linux-4.1.21-14-default] (SUSE RPM) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 5K500.B Device Model: Hitachi HTS545032B9A300 Serial Number: 100215PB4C001YHJA2BA LU WWN Device Id: 5 000cca 5edd58344 Firmware Version: PB3OC60N User Capacity: 320.072.933.376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Jun 8 18:45:04 2016 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 106) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 154 154 033 Pre-fail Always - 2 4 Start_Stop_Count 0x0012 097 097 000 Old_age Always - 4898 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 049 049 000 Old_age Always - 22767 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 4834 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 58 193 Load_Cycle_Count 0x0012 001 001 000 Old_age Always - 2875631 194 Temperature_Celsius 0x0002 141 141 000 Old_age Always - 39 (Min/Max 8/50) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 4 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 81 15 43 e0 Error: IDNF 1 sectors at LBA = 0x00431581 = 4396417 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 fc 01 81 15 43 e0 00 02:07:05.700 READ DMA EXT 25 fc 01 c2 40 0b e0 00 02:07:05.700 READ DMA EXT 25 fc 06 bc 40 0b e0 00 02:07:05.700 READ DMA EXT 25 fc 01 bb 40 0b e0 00 02:07:05.700 READ DMA EXT 25 fc 05 b6 40 0b e0 00 02:07:05.700 READ DMA EXT Error 3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 81 15 43 e0 Error: IDNF 1 sectors at LBA = 0x00431581 = 4396417 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d9 01 81 15 43 e0 00 00:01:07.700 READ DMA EXT 25 d9 01 81 15 43 e0 00 00:01:07.600 READ DMA EXT 35 d9 01 00 00 00 e0 00 00:01:07.600 WRITE DMA EXT 25 d9 01 00 00 00 e0 00 00:01:07.600 READ DMA EXT 25 d9 01 81 15 43 e0 00 00:01:07.200 READ DMA EXT Error 2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 81 15 43 e0 Error: IDNF 1 sectors at LBA = 0x00431581 = 4396417 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d9 01 81 15 43 e0 00 00:01:07.600 READ DMA EXT 35 d9 01 00 00 00 e0 00 00:01:07.600 WRITE DMA EXT 25 d9 01 00 00 00 e0 00 00:01:07.600 READ DMA EXT 25 d9 01 81 15 43 e0 00 00:01:07.200 READ DMA EXT 25 00 01 00 00 00 e0 00 00:00:17.200 READ DMA EXT Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 81 15 43 e0 Error: IDNF 1 sectors at LBA = 0x00431581 = 4396417 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d9 01 81 15 43 e0 00 00:01:07.200 READ DMA EXT 25 00 01 00 00 00 e0 00 00:00:17.200 READ DMA EXT 25 00 01 00 00 00 e0 00 00:00:17.200 READ DMA EXT 25 00 01 00 00 00 e0 00 00:00:17.200 READ DMA EXT 25 00 01 00 00 00 e0 00 00:00:17.200 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22767 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. linux-wfvx:/home/wilfried #