Linux mdll-nas 4.12.14-lp151.28.7-default #1 SMP Mon Jun 17 16:36:38 UTC 2019 (f8a1872) x86_64 x86_64 x86_64 GNU/Linux
 
[    0.000000] Linux version 4.12.14-lp151.28.7-default (geeko@buildhost) (gcc version 7.4.0 (SUSE Linux) ) #1 SMP Mon Jun 17 16:36:38 UTC 2019 (f8a1872)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.7-default root=UUID=248a446b-4e8c-435b-a67e-d5b136dad4e3 splash=silent resume=/dev/disk/by-uuid/4bf43c54-dc87-485e-8f44-cf3975472be7 mitigations=auto quiet
[    0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000097fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008d9c5fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008d9c6000-0x000000008e8c1fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008e8c2000-0x000000008efc1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008efc2000-0x000000008effefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008efff000-0x000000008effffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff830000-0x00000000ff84efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x834c0018-0x834cf457] usable ==> usable
[    0.000000] e820: update [mem 0x834c0018-0x834cf457] usable ==> usable
[    0.000000] e820: update [mem 0x834b2018-0x834bf057] usable ==> usable
[    0.000000] e820: update [mem 0x834b2018-0x834bf057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000008e000-0x000000000008ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000097fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000834b2017] usable
[    0.000000] reserve setup_data: [mem 0x00000000834b2018-0x00000000834bf057] usable
[    0.000000] reserve setup_data: [mem 0x00000000834bf058-0x00000000834c0017] usable
[    0.000000] reserve setup_data: [mem 0x00000000834c0018-0x00000000834cf457] usable
[    0.000000] reserve setup_data: [mem 0x00000000834cf458-0x000000008d9c5fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008d9c6000-0x000000008e8c1fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008e8c2000-0x000000008efc1fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008efc2000-0x000000008effefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008efff000-0x000000008effffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff830000-0x00000000ff84efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000013effffff] usable
[    0.000000] efi: EFI v2.10 by HPQ
[    0.000000] efi:  ACPI=0x8effe000  ACPI 2.0=0x8effe014  SMBIOS=0x8e072b18 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 645 G1/1992, BIOS L72 Ver. 01.21 09/16/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFF0000000 write-back
[    0.000000]   2 base 0000FF800000 mask FFFFFF800000 write-protect
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000013f000000 aka 5104M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000091000] 91000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x0308c000, 0x0308cfff] PGTABLE
[    0.000000] BRK [0x0308d000, 0x0308dfff] PGTABLE
[    0.000000] BRK [0x0308e000, 0x0308efff] PGTABLE
[    0.000000] BRK [0x0308f000, 0x0308ffff] PGTABLE
[    0.000000] BRK [0x03090000, 0x03090fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x3f39c000-0x3fffafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008EFFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000008EFFE120 000074 (v01 HPQOEM SLIC-MPC 00000003      01000013)
[    0.000000] ACPI: FACP 0x000000008EFFC000 00010C (v05 HPQOEM 1992     00000003 HP   00000001)
[    0.000000] ACPI: DSDT 0x000000008EFD7000 020248 (v01 HPQOEM 1992     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 0x000000008E877000 000040
[    0.000000] ACPI: FACS 0x000000008E877000 000040
[    0.000000] ACPI: HPET 0x000000008EFFB000 000038 (v01 HPQOEM 1992     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x000000008EFFA000 000084 (v01 HPQOEM 1992     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x000000008EFF9000 00003C (v01 HPQOEM 1992     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 0x000000008EFF8000 000032 (v02 HPQOEM 1992     00000000 HP   00000001)
[    0.000000] ACPI: SLIC 0x000000008EFD5000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: FPDT 0x000000008EFD3000 000044 (v01 HPQOEM 1992     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 0x000000008EFD2000 000038 (v00 HPQOEM 1992     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000008EFD1000 0005E0 (v01 AMD    PUMORI   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x000000008EFCF000 001F6E (v02 AMD    PUMORI   00000001 MSFT 04000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13efe8000-0x13effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008dfff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x0000000000097fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000008d9c5fff]
[    0.000000]   node   0: [mem 0x000000008efff000-0x000000008effffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 837980
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1072 pages reserved
[    0.000000]   DMA zone: 3989 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9000 pages used for memmap
[    0.000000]   DMA32 zone: 575943 pages, LIFO batch:63
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x834b2000-0x834b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x834bf000-0x834bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x834c0000-0x834c0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x834cf000-0x834cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8d9c6000-0x8e8c1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8e8c2000-0x8efc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8efc2000-0x8effefff]
[    0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xff82ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff830000-0xff84efff]
[    0.000000] PM: Registered nosave memory: [mem 0xff84f000-0xffffffff]
[    0.000000] e820: [mem 0x8f000000-0xfec0ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 48 pages/cpu @ffff88013ec00000 s159744 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s159744 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 823812
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.7-default root=UUID=248a446b-4e8c-435b-a67e-d5b136dad4e3 splash=silent resume=/dev/disk/by-uuid/4bf43c54-dc87-485e-8f44-cf3975472be7 mitigations=auto quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 3087880K/3351920K available (10256K kernel code, 1469K rwdata, 3484K rodata, 2096K init, 9888K bss, 264040K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 34505 entries in 135 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU event tracing is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2694.992 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.98 BogoMIPS (lpj=10779968)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.018004] Security Framework initialized
[    0.018025] AppArmor: AppArmor initialized
[    0.019218] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.019845] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.019887] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019908] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.020175] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.020176] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.020179] Spectre V2 : Mitigation: Full AMD retpoline
[    0.020180] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.020181] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.020316] Freeing SMP alternatives memory: 32K
[    0.031723] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072000] smpboot: CPU0: AMD A6-4400M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
[    0.072000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.072000] ... version:                0
[    0.072000] ... bit width:              48
[    0.072000] ... generic registers:      6
[    0.072000] ... value mask:             0000ffffffffffff
[    0.072000] ... max period:             00007fffffffffff
[    0.072000] ... fixed-purpose events:   0
[    0.072000] ... event mask:             000000000000003f
[    0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072000] smp: Bringing up secondary CPUs ...
[    0.072000] x86: Booting SMP configuration:
[    0.072000] .... node  #0, CPUs:      #1
[    0.072000] smp: Brought up 1 node, 2 CPUs
[    0.072000] smpboot: Max logical packages: 2
[    0.072000] smpboot: Total of 2 processors activated (10779.96 BogoMIPS)
[    0.072000] devtmpfs: initialized
[    0.072059] x86/mm: Memory block size: 128MB
[    0.074897] evm: security.selinux
[    0.074898] evm: security.ima
[    0.074898] evm: security.capability
[    0.074934] PM: Registering ACPI NVS region [mem 0x0008e000-0x0008ffff] (8192 bytes)
[    0.074934] PM: Registering ACPI NVS region [mem 0x8e8c2000-0x8efc1fff] (7340032 bytes)
[    0.074934] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.074934] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.074934] pinctrl core: initialized pinctrl subsystem
[    0.074934] RTC time: 11:57:53, date: 07/12/19
[    0.074934] NET: Registered protocol family 16
[    0.074934] cpuidle: using governor ladder
[    0.074934] cpuidle: using governor menu
[    0.074934] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.074934] ACPI: bus type PCI registered
[    0.074934] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.074934] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.076007] PCI: not using MMCONFIG
[    0.076008] PCI: Using configuration type 1 for base access
[    0.076008] PCI: Using configuration type 1 for extended access
[    0.077290] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.077290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.077290] ACPI: Added _OSI(Module Device)
[    0.077290] ACPI: Added _OSI(Processor Device)
[    0.077290] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.077290] ACPI: Added _OSI(Processor Aggregator Device)
[    0.093295] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.106444] ACPI : EC: EC started
[    0.106446] ACPI : EC: interrupt blocked
[    0.117333] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.117335] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.117337] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.117337] ACPI: Interpreter enabled
[    0.117358] ACPI: (supports S0 S3 S4 S5)
[    0.117360] ACPI: Using IOAPIC for interrupt routing
[    0.117661] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.118136] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.118150] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.118652] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.122473] ACPI: Power Resource [APPR] (off)
[    0.127073] ACPI: Power Resource [COMP] (off)
[    0.127992] ACPI: Power Resource [LPP] (on)
[    0.128985] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SATA.ODDZ.ZPOD], AE_NOT_FOUND (20170303/psargs-330)
[    0.128998] ACPI Error: Method parse/execution failed \_SB.PCI0.SATA.PRT1._STA, AE_NOT_FOUND (20170303/psparse-516)
[    0.132364] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.132371] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.132735] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.133077] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.133078] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.133211] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf3ff])
[    0.133213] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[    0.133510] PCI host bridge to bus 0000:00
[    0.133513] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.133514] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.133516] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.133517] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.133518] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.133519] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.133521] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.133522] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.133523] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.133524] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.133526] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.133527] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.133528] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.133530] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.133531] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.133532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfffdffff window]
[    0.133534] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.133543] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.133702] pci 0000:00:01.0: [1002:9990] type 00 class 0x030000
[    0.133712] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.133717] pci 0000:00:01.0: reg 0x14: [io  0x5000-0x50ff]
[    0.133722] pci 0000:00:01.0: reg 0x18: [mem 0xd6000000-0xd603ffff]
[    0.133738] pci 0000:00:01.0: enabling Extended Tags
[    0.133747] pci 0000:00:01.0: BAR 0: assigned to efifb
[    0.133766] pci 0000:00:01.0: supports D1 D2
[    0.133855] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[    0.133864] pci 0000:00:01.1: reg 0x10: [mem 0xd6044000-0xd6047fff]
[    0.133887] pci 0000:00:01.1: enabling Extended Tags
[    0.133911] pci 0000:00:01.1: supports D1 D2
[    0.134041] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[    0.134061] pci 0000:00:04.0: enabling Extended Tags
[    0.134088] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.134180] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[    0.134200] pci 0000:00:05.0: enabling Extended Tags
[    0.134226] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.134389] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.134414] pci 0000:00:10.0: reg 0x10: [mem 0xd6048000-0xd6049fff 64bit]
[    0.134524] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.134692] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[    0.134716] pci 0000:00:10.1: reg 0x10: [mem 0xd604a000-0xd604bfff 64bit]
[    0.134827] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.134993] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.135010] pci 0000:00:11.0: reg 0x10: [io  0x5118-0x511f]
[    0.135019] pci 0000:00:11.0: reg 0x14: [io  0x5124-0x5127]
[    0.135028] pci 0000:00:11.0: reg 0x18: [io  0x5110-0x5117]
[    0.135037] pci 0000:00:11.0: reg 0x1c: [io  0x5120-0x5123]
[    0.135046] pci 0000:00:11.0: reg 0x20: [io  0x5100-0x510f]
[    0.135056] pci 0000:00:11.0: reg 0x24: [mem 0xd6051000-0xd60517ff]
[    0.135295] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.135309] pci 0000:00:12.0: reg 0x10: [mem 0xd6050000-0xd6050fff]
[    0.135503] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.135519] pci 0000:00:12.2: reg 0x10: [mem 0xd604f000-0xd604f0ff]
[    0.135598] pci 0000:00:12.2: supports D1 D2
[    0.135599] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.135745] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.135759] pci 0000:00:13.0: reg 0x10: [mem 0xd604e000-0xd604efff]
[    0.135947] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.135964] pci 0000:00:13.2: reg 0x10: [mem 0xd604d000-0xd604d0ff]
[    0.136047] pci 0000:00:13.2: supports D1 D2
[    0.136049] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136193] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.136383] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.136574] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.136727] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.136741] pci 0000:00:14.5: reg 0x10: [mem 0xd604c000-0xd604cfff]
[    0.136925] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.137009] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.137089] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.137169] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.137254] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.137334] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.137530] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.137549] pci 0000:01:00.0: reg 0x10: [io  0x4000-0x40ff]
[    0.137570] pci 0000:01:00.0: reg 0x18: [mem 0xd5000000-0xd5000fff 64bit]
[    0.137584] pci 0000:01:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.137664] pci 0000:01:00.0: supports D1 D2
[    0.137665] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152064] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.152070] pci 0000:00:04.0:   bridge window [io  0x4000-0x4fff]
[    0.152073] pci 0000:00:04.0:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.152077] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.152237] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.152259] pci 0000:02:00.0: reg 0x10: [mem 0xd4000000-0xd4000fff]
[    0.152373] pci 0000:02:00.0: supports D1 D2
[    0.152375] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.164067] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.164073] pci 0000:00:05.0:   bridge window [io  0x3000-0x3fff]
[    0.164076] pci 0000:00:05.0:   bridge window [mem 0xd4000000-0xd4ffffff]
[    0.164079] pci 0000:00:05.0:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.164227] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
[    0.164236] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.164238] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.164240] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.164241] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.164242] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.164244] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.164245] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.164247] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.164248] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.164250] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.164251] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.164252] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.164254] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.164255] pci 0000:00:14.4:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.164257] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.164258] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfffdffff window] (subtractive decode)
[    0.165536] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SATA.ODDZ.ZPOD], AE_NOT_FOUND (20170303/psargs-330)
[    0.165548] ACPI Error: Method parse/execution failed \_SB.PCI0.SATA.PRT1._STA, AE_NOT_FOUND (20170303/psparse-516)
[    0.166060] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.166174] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.166292] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.166409] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.166504] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.166578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.166651] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.166724] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.168003] ACPI : EC: interrupt unblocked
[    0.168003] ACPI : EC: event unblocked
[    0.168003] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.168003] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.168021] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.168021] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.168021] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.168021] vgaarb: loaded
[    0.168106] SCSI subsystem initialized
[    0.168122] libata version 3.00 loaded.
[    0.168122] Linux cec interface: v0.10
[    0.168122] EDAC MC: Ver: 3.0.0
[    0.168264] Registered efivars operations
[    0.440100] PCI: Using ACPI for IRQ routing
[    0.448444] PCI: pci_cache_line_size set to 64 bytes
[    0.448505] e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
[    0.448507] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
[    0.448508] e820: reserve RAM buffer [mem 0x834b2018-0x83ffffff]
[    0.448509] e820: reserve RAM buffer [mem 0x834c0018-0x83ffffff]
[    0.448510] e820: reserve RAM buffer [mem 0x8d9c6000-0x8fffffff]
[    0.448511] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[    0.448512] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.448626] NetLabel: Initializing
[    0.448628] NetLabel:  domain hash size = 128
[    0.448628] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.448645] NetLabel:  unlabeled traffic allowed by default
[    0.448678] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.448678] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.450167] clocksource: Switched to clocksource hpet
[    0.463003] VFS: Disk quotas dquot_6.6.0
[    0.463041] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.463176] AppArmor: AppArmor Filesystem Enabled
[    0.463224] pnp: PnP ACPI init
[    0.463401] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.463404] system 00:00: [mem 0xfeb00000-0xfeb00fff] has been reserved
[    0.463406] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.463408] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.463412] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.463718] system 00:01: [io  0x0400-0x04cf] has been reserved
[    0.463720] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.463722] system 00:01: [io  0x04d6] has been reserved
[    0.463723] system 00:01: [io  0x0680-0x06ff] has been reserved
[    0.463725] system 00:01: [io  0x077a] has been reserved
[    0.463727] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.463728] system 00:01: [io  0x0c14] has been reserved
[    0.463730] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.463731] system 00:01: [io  0x0c6c] has been reserved
[    0.463733] system 00:01: [io  0x0c6f] has been reserved
[    0.463734] system 00:01: [io  0x0cd0-0x0cdb] has been reserved
[    0.463736] system 00:01: [io  0x0220-0x0227] has been reserved
[    0.463737] system 00:01: [io  0x0260-0x0273] has been reserved
[    0.463739] system 00:01: [io  0x0800] has been reserved
[    0.463740] system 00:01: [io  0x0804] has been reserved
[    0.463742] system 00:01: [io  0x087f] has been reserved
[    0.463743] system 00:01: [io  0x0cdc-0x0cdf] has been reserved
[    0.463745] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.463747] system 00:01: [io  0x0200-0x027f] could not be reserved
[    0.463748] system 00:01: [io  0x0840-0x0847] has been reserved
[    0.463751] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.463840] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.463842] system 00:02: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.463844] system 00:02: [mem 0xffe00000-0xffffffff] could not be reserved
[    0.463846] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.463941] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.464829] pnp 00:04: [dma 0 disabled]
[    0.464908] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.464935] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.464960] pnp 00:06: Plug and Play ACPI device, IDs SYN3009 SYN0100 SYN0002 PNP0f13 (active)
[    0.465089] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SATA.ODDZ.ZPOD], AE_NOT_FOUND (20170303/psargs-330)
[    0.465101] ACPI Error: Method parse/execution failed \_SB.PCI0.SATA.PRT1._STA, AE_NOT_FOUND (20170303/psparse-516)
[    0.465396] pnp 00:07: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.465585] pnp: PnP ACPI: found 8 devices
[    0.472619] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.472645] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.472648] pci 0000:00:04.0:   bridge window [io  0x4000-0x4fff]
[    0.472652] pci 0000:00:04.0:   bridge window [mem 0xd5000000-0xd5ffffff]
[    0.472654] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.472658] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.472660] pci 0000:00:05.0:   bridge window [io  0x3000-0x3fff]
[    0.472662] pci 0000:00:05.0:   bridge window [mem 0xd4000000-0xd4ffffff]
[    0.472665] pci 0000:00:05.0:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.472668] pci 0000:00:14.4: PCI bridge to [bus 06]
[    0.472682] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.472684] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.472685] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.472687] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.472688] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.472689] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.472691] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.472692] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.472694] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.472695] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.472696] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.472698] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[    0.472699] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[    0.472700] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[    0.472702] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff window]
[    0.472703] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfffdffff window]
[    0.472705] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.472706] pci_bus 0000:01: resource 1 [mem 0xd5000000-0xd5ffffff]
[    0.472707] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.472709] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.472710] pci_bus 0000:02: resource 1 [mem 0xd4000000-0xd4ffffff]
[    0.472712] pci_bus 0000:02: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[    0.472713] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
[    0.472714] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
[    0.472716] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.472717] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.472718] pci_bus 0000:06: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.472720] pci_bus 0000:06: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.472721] pci_bus 0000:06: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.472722] pci_bus 0000:06: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.472724] pci_bus 0000:06: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.472725] pci_bus 0000:06: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.472726] pci_bus 0000:06: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.472728] pci_bus 0000:06: resource 15 [mem 0x000e8000-0x000ebfff window]
[    0.472729] pci_bus 0000:06: resource 16 [mem 0x000ec000-0x000effff window]
[    0.472730] pci_bus 0000:06: resource 17 [mem 0x000f0000-0x000fffff window]
[    0.472732] pci_bus 0000:06: resource 18 [mem 0xc0000000-0xdfffffff window]
[    0.472733] pci_bus 0000:06: resource 19 [mem 0xf0000000-0xfffdffff window]
[    0.472885] NET: Registered protocol family 2
[    0.473058] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.473147] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.473272] TCP: Hash tables configured (established 32768 bind 32768)
[    0.473335] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.473358] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.473429] NET: Registered protocol family 1
[    0.473436] NET: Registered protocol family 44
[    0.473450] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.473455] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[    0.533159] pci 0000:00:12.2: PME# does not work under D3, disabling it
[    0.593162] pci 0000:00:13.2: PME# does not work under D3, disabling it
[    0.652572] PCI: CLS 64 bytes, default 64
[    0.652624] Unpacking initramfs...
[    2.029715] Freeing initrd memory: 12668K
[    2.029755] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.029759] software IO TLB [mem 0x85377000-0x89377000] (64MB) mapped at [ffff880085377000-ffff880089376fff]
[    2.029802] amd_uncore: AMD NB counters detected
[    2.029905] LVT offset 0 assigned for vector 0x400
[    2.029926] perf: AMD IBS detected (0x000000ff)
[    2.029983] Scanning for low memory corruption every 60 seconds
[    2.030451] audit: initializing netlink subsys (disabled)
[    2.030549] audit: type=2000 audit(1562932675.028:1): state=initialized audit_enabled=0 res=1
[    2.030991] workingset: timestamp_bits=37 max_order=20 bucket_order=0
[    2.031024] zbud: loaded
[    2.033352] Key type asymmetric registered
[    2.033353] Asymmetric key parser 'x509' registered
[    2.033367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.033412] io scheduler noop registered
[    2.033413] io scheduler deadline registered
[    2.033431] io scheduler cfq registered (default)
[    2.033431] io scheduler mq-deadline registered
[    2.033432] io scheduler kyber registered
[    2.033440] io scheduler bfq registered
[    2.034353] pcieport 0000:00:04.0: Signaling PME with IRQ 24
[    2.034367] pcieport 0000:00:05.0: Signaling PME with IRQ 25
[    2.034383] pciehp 0000:00:04.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[    2.034516] pciehp 0000:00:05.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[    2.034581] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.034613] efifb: probing for efifb
[    2.034630] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    2.034631] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    2.034631] efifb: scrolling: redraw
[    2.034632] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.036533] Console: switching to colour frame buffer device 128x48
[    2.038182] fb0: EFI VGA frame buffer device
[    2.038402] GHES: HEST is not enabled!
[    2.038562] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.040512] Non-volatile memory driver v1.3
[    2.040543] Linux agpgart interface v0.103
[    2.045659] tpm_tis 00:07: 1.2 TPM (device-id 0xB, rev-id 16)
[    2.063623] tpm tpm0: TPM is disabled/deactivated (0x7)
[    2.070080] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.072301] i8042: Detected active multiplexing controller, rev 1.1
[    2.073455] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.073460] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.073488] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.073511] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.073533] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.073697] mousedev: PS/2 mouse device common for all mice
[    2.073768] rtc_cmos 00:03: RTC can wake from S4
[    2.073877] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.073901] rtc_cmos 00:03: alarms up to one month, 114 bytes nvram, hpet irqs
[    2.073932] ledtrig-cpu: registered to indicate activity on CPUs
[    2.073933] EFI Variables Facility v0.08 2004-May-17
[    2.108051] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.344675] hidraw: raw HID events driver (C) Jiri Kosina
[    2.344879] NET: Registered protocol family 10
[    2.350771] Segment Routing with IPv6
[    2.351097] mce: Using 7 MCE banks
[    2.351136] microcode: CPU0: patch_level=0x06001119
[    2.351191] microcode: CPU1: patch_level=0x06001119
[    2.351230] microcode: Microcode Update Driver: v2.2.
[    2.351241] sched_clock: Marking stable (2351225619, 0)->(2486288521, -135062902)
[    2.351466] registered taskstats version 1
[    2.351486] zswap: loaded using pool lzo/zbud
[    2.351614] page_owner is disabled
[    2.356923] Key type big_key registered
[    2.359488] Key type encrypted registered
[    2.359495] AppArmor: AppArmor sha1 policy hashing enabled
[    2.362959] ima: No TPM chip found, activating TPM-bypass! (rc=7)
[    2.362968] ima: Allocated hash algorithm: sha256
[    2.362997] evm: HMAC attrs: 0x1
[    2.363325]   Magic number: 11:515:984
[    2.363487] rtc_cmos 00:03: setting system clock to 2019-07-12 11:57:56 UTC (1562932676)
[    2.363529] PM: Checking hibernation image partition /dev/disk/by-uuid/4bf43c54-dc87-485e-8f44-cf3975472be7
[    3.036157] tsc: Refined TSC clocksource calibration: 2694.961 MHz
[    3.036166] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d8a641443, max_idle_ns: 440795233662 ns
[    3.220094] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input6
[    3.791976] random: fast init done
[    4.019303] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826]
[    4.053714] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..]
[    4.053723] psmouse serio3: synaptics: Your touchpad (PNP: SYN3009 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    4.060160] clocksource: Switched to clocksource tsc
[    4.115282] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2758, fw id: 1530444
[    4.154221] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7
[    4.157856] PM: Hibernation image not present or could not be loaded.
[    4.160116] Freeing unused kernel memory: 2096K
[    4.172148] Write protecting the kernel read-only data: 16384k
[    4.173120] Freeing unused kernel memory: 2020K
[    4.174723] Freeing unused kernel memory: 612K
[    4.631818] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[    4.631927] systemd[1]: Detected architecture x86-64.
[    4.631930] systemd[1]: Running in initial RAM disk.
[    4.631945] systemd[1]: Set hostname to <mdll-nas>.
[    4.724082] random: systemd: uninitialized urandom read (16 bytes read)
[    4.724150] systemd[1]: Listening on Journal Socket.
[    4.724197] random: systemd: uninitialized urandom read (16 bytes read)
[    4.724219] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.724243] random: systemd: uninitialized urandom read (16 bytes read)
[    4.724261] systemd[1]: Listening on udev Kernel Socket.
[    4.724273] systemd[1]: Reached target Swap.
[    4.724694] systemd[1]: Created slice System Slice.
[    4.725512] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.783085] alua: device handler registered
[    4.783426] emc: device handler registered
[    4.783675] rdac: device handler registered
[    4.791282] device-mapper: uevent: version 1.0.3
[    4.791354] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    5.143388] random: crng init done
[    5.143391] random: 7 urandom warning(s) missed due to ratelimiting
[    5.197403] ahci 0000:00:11.0: version 3.0
[    5.198058] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1d impl SATA mode
[    5.198061] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    5.203904] ACPI: bus type USB registered
[    5.203942] usbcore: registered new interface driver usbfs
[    5.203955] usbcore: registered new interface driver hub
[    5.204212] usbcore: registered new device driver usb
[    5.219237] scsi host0: ahci
[    5.257622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.258697] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.268454] scsi host1: ahci
[    5.273677] ehci-pci: EHCI PCI platform driver
[    5.276789] [drm] radeon kernel modesetting enabled.
[    5.277322] scsi host2: ahci
[    5.277475] scsi host3: ahci
[    5.277586] scsi host4: ahci
[    5.277686] ata1: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051100 irq 26
[    5.277687] ata2: DUMMY
[    5.277690] ata3: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051200 irq 26
[    5.277693] ata4: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051280 irq 26
[    5.277696] ata5: SATA max UDMA/133 abar m2048@0xd6051000 port 0xd6051300 irq 26
[    5.278309] QUIRK: Enable AMD PLL fix
[    5.278392] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    5.278401] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    5.278609] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
[    5.278827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.278830] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.278831] usb usb1: Product: xHCI Host Controller
[    5.278833] usb usb1: Manufacturer: Linux 4.12.14-lp151.28.7-default xhci-hcd
[    5.278834] usb usb1: SerialNumber: 0000:00:10.0
[    5.279004] hub 1-0:1.0: USB hub found
[    5.279064] hub 1-0:1.0: 2 ports detected
[    5.279401] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    5.279406] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    5.282039] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.282080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    5.282083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.282084] usb usb2: Product: xHCI Host Controller
[    5.282086] usb usb2: Manufacturer: Linux 4.12.14-lp151.28.7-default xhci-hcd
[    5.282088] usb usb2: SerialNumber: 0000:00:10.0
[    5.282256] hub 2-0:1.0: USB hub found
[    5.282314] hub 2-0:1.0: 2 ports detected
[    5.283133] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    5.283141] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    5.388535] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
[    5.388791] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    5.388794] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.388796] usb usb3: Product: xHCI Host Controller
[    5.388798] usb usb3: Manufacturer: Linux 4.12.14-lp151.28.7-default xhci-hcd
[    5.388799] usb usb3: SerialNumber: 0000:00:10.1
[    5.388976] hub 3-0:1.0: USB hub found
[    5.389033] hub 3-0:1.0: 2 ports detected
[    5.389373] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    5.389379] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[    5.391668] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.391705] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    5.391707] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.391709] usb usb4: Product: xHCI Host Controller
[    5.391710] usb usb4: Manufacturer: Linux 4.12.14-lp151.28.7-default xhci-hcd
[    5.391712] usb usb4: SerialNumber: 0000:00:10.1
[    5.391868] hub 4-0:1.0: USB hub found
[    5.391927] hub 4-0:1.0: 2 ports detected
[    5.406856] ehci-pci 0000:00:12.2: EHCI Host Controller
[    5.406867] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
[    5.406873] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.406884] ehci-pci 0000:00:12.2: debug port 1
[    5.407177] ehci-pci 0000:00:12.2: irq 17, io mem 0xd604f000
[    5.425230] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    5.425323] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    5.425325] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.425326] usb usb5: Product: EHCI Host Controller
[    5.425328] usb usb5: Manufacturer: Linux 4.12.14-lp151.28.7-default ehci_hcd
[    5.425329] usb usb5: SerialNumber: 0000:00:12.2
[    5.425497] hub 5-0:1.0: USB hub found
[    5.425505] hub 5-0:1.0: 5 ports detected
[    5.426425] ehci-pci 0000:00:13.2: EHCI Host Controller
[    5.426432] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
[    5.426436] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.426447] ehci-pci 0000:00:13.2: debug port 1
[    5.426483] ehci-pci 0000:00:13.2: irq 17, io mem 0xd604d000
[    5.440086] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    5.440182] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    5.440184] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.440186] usb usb6: Product: EHCI Host Controller
[    5.440188] usb usb6: Manufacturer: Linux 4.12.14-lp151.28.7-default ehci_hcd
[    5.440189] usb usb6: SerialNumber: 0000:00:13.2
[    5.440534] hub 6-0:1.0: USB hub found
[    5.440618] hub 6-0:1.0: 5 ports detected
[    5.441407] ohci-pci: OHCI PCI platform driver
[    5.441441] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    5.441442] fb: switching to radeondrmfb from EFI VGA
[    5.441479] Console: switching to colour dummy device 80x25
[    5.446957] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9990 0x103C:0x1992 0x00).
[    5.447012] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[    5.447018] caller pci_map_rom+0x58/0xc0 mapping multiple BARs
[    5.447939] ATOM BIOS: HP
[    5.448043] radeon 0000:00:01.0: VRAM: 768M 0x0000000000000000 - 0x000000002FFFFFFF (768M used)
[    5.448045] radeon 0000:00:01.0: GTT: 1024M 0x0000000030000000 - 0x000000006FFFFFFF
[    5.448049] [drm] Detected VRAM RAM=768M, BAR=256M
[    5.448050] [drm] RAM width 32bits DDR
[    5.448925] [TTM] Zone  kernel: Available graphics memory: 1601476 kiB
[    5.448926] [TTM] Initializing pool allocator
[    5.448931] [TTM] Initializing DMA pool allocator
[    5.448951] [drm] radeon: 768M of VRAM memory ready
[    5.448952] [drm] radeon: 1024M of GTT memory ready.
[    5.448964] [drm] Loading ARUBA Microcode
[    5.449033] [drm] Internal thermal controller without fan control
[    5.449526] [drm] radeon: dpm initialized
[    5.451219] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    5.451228] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.493316] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[    5.493561] radeon 0000:00:01.0: WB enabled
[    5.493565] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff8801341c1c00
[    5.493944] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001235a18
[    5.513970] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18 and cpu addr 0xffff8801341c1c18
[    5.513972] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c and cpu addr 0xffff8801341c1c1c
[    5.513975] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff8801341c1c04
[    5.513977] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff8801341c1c08
[    5.513979] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff8801341c1c0c
[    5.513981] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff8801341c1c10
[    5.515704] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.515705] [drm] Driver supports precise vblank timestamp query.
[    5.515707] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    5.515753] radeon 0000:00:01.0: radeon: using MSI.
[    5.515779] [drm] radeon: irq initialized.
[    5.534690] [drm] ring test on 0 succeeded in 2 usecs
[    5.534697] [drm] ring test on 3 succeeded in 3 usecs
[    5.534703] [drm] ring test on 4 succeeded in 3 usecs
[    5.581229] [drm] ring test on 5 succeeded in 1 usecs
[    5.601098] [drm] UVD initialized successfully.
[    5.703247] ata3: SATA link down (SStatus 0 SControl 300)
[    5.710584] [drm] ring test on 6 succeeded in 17 usecs
[    5.710595] [drm] ring test on 7 succeeded in 3 usecs
[    5.710596] [drm] VCE initialized successfully.
[    5.710791] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.710895] [drm] ib test on ring 3 succeeded in 0 usecs
[    5.710997] [drm] ib test on ring 4 succeeded in 0 usecs
[    5.711368] ata4: SATA link down (SStatus 0 SControl 300)
[    5.719241] ata5: SATA link down (SStatus 0 SControl 300)
[    5.732207] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    5.768232] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.769558] ata1.00: ATA-8: WDC WD10JPVT-22A1YT0, 01.01A01, max UDMA/133
[    5.769561] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.770957] ata1.00: configured for UDMA/133
[    5.771167] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVT-22A 1A01 PQ: 0 ANSI: 5
[    5.771536] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.771538] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.771552] sd 0:0:0:0: [sda] Write Protect is off
[    5.771554] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.771578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.771588] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.850806]  sda: sda1 sda2 sda3 sda4
[    5.851423] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.888080] usb 3-2: New USB device found, idVendor=0424, idProduct=2134
[    5.888084] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.888085] usb 3-2: Product: USB2134B
[    5.888087] usb 3-2: Manufacturer: SMSC
[    5.889077] hub 3-2:1.0: USB hub found
[    5.889443] hub 3-2:1.0: 2 ports detected
[    6.012449] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    6.036325] usb 4-2: New USB device found, idVendor=0424, idProduct=5534
[    6.036328] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    6.036330] usb 4-2: Product: USB5534B
[    6.036332] usb 4-2: Manufacturer: SMSC
[    6.037275] hub 4-2:1.0: USB hub found
[    6.037729] hub 4-2:1.0: 2 ports detected
[    6.236404] [drm] ib test on ring 5 succeeded
[    6.530102] PM: Starting manual resume from disk
[    6.530106] PM: Hibernation image partition 8:3 present
[    6.530107] PM: Looking for hibernation image.
[    6.530411] PM: Image not found (code -22)
[    6.530413] PM: Hibernation image not present or could not be loaded.
[    6.780288] [drm] ib test on ring 6 succeeded
[    7.269599] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[    7.277028] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    7.292107] [drm] ib test on ring 7 succeeded
[    7.296938] [drm] radeon atom DIG backlight initialized
[    7.296941] [drm] Radeon Display Connectors
[    7.296942] [drm] Connector 0:
[    7.296943] [drm]   DP-1
[    7.296944] [drm]   HPD1
[    7.296946] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    7.296946] [drm]   Encoders:
[    7.296947] [drm]     DFP1: INTERNAL_UNIPHY2
[    7.296948] [drm] Connector 1:
[    7.296949] [drm]   DP-2
[    7.296950] [drm]   HPD2
[    7.296952] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    7.296952] [drm]   Encoders:
[    7.296953] [drm]     DFP2: INTERNAL_UNIPHY2
[    7.296953] [drm] Connector 2:
[    7.296954] [drm]   eDP-1
[    7.296955] [drm]   HPD3
[    7.296957] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[    7.296957] [drm]   Encoders:
[    7.296958] [drm]     LCD1: INTERNAL_UNIPHY
[    7.296959] [drm] Connector 3:
[    7.296959] [drm]   DP-3
[    7.296960] [drm]   HPD5
[    7.296962] [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[    7.296962] [drm]   Encoders:
[    7.296963] [drm]     DFP3: INTERNAL_UNIPHY1
[    7.296964] [drm] Connector 4:
[    7.296965] [drm]   DP-4
[    7.296966] [drm]   HPD4
[    7.296967] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    7.296968] [drm]   Encoders:
[    7.296969] [drm]     DFP4: INTERNAL_UNIPHY1
[    8.321167] [drm] fb mappable at 0xC03DA000
[    8.321170] [drm] vram apper at 0xC0000000
[    8.321171] [drm] size 4325376
[    8.321172] [drm] fb depth is 24
[    8.321173] [drm]    pitch is 5632
[    8.321317] fbcon: radeondrmfb (fb0) is primary device
[   10.014955] Console: switching to colour frame buffer device 170x48
[   10.017623] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   10.036635] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[   10.037226] ohci-pci 0000:00:12.0: OHCI PCI host controller
[   10.037236] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
[   10.037278] ohci-pci 0000:00:12.0: irq 18, io mem 0xd6050000
[   10.100359] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[   10.100363] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.100364] usb usb7: Product: OHCI PCI host controller
[   10.100366] usb usb7: Manufacturer: Linux 4.12.14-lp151.28.7-default ohci_hcd
[   10.100367] usb usb7: SerialNumber: 0000:00:12.0
[   10.100657] hub 7-0:1.0: USB hub found
[   10.100669] hub 7-0:1.0: 5 ports detected
[   10.101450] ohci-pci 0000:00:13.0: OHCI PCI host controller
[   10.101456] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[   10.101481] ohci-pci 0000:00:13.0: irq 18, io mem 0xd604e000
[   10.164299] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[   10.164303] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.164305] usb usb8: Product: OHCI PCI host controller
[   10.164306] usb usb8: Manufacturer: Linux 4.12.14-lp151.28.7-default ohci_hcd
[   10.164307] usb usb8: SerialNumber: 0000:00:13.0
[   10.164547] hub 8-0:1.0: USB hub found
[   10.164603] hub 8-0:1.0: 5 ports detected
[   10.165272] ohci-pci 0000:00:14.5: OHCI PCI host controller
[   10.165278] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
[   10.165303] ohci-pci 0000:00:14.5: irq 18, io mem 0xd604c000
[   10.228297] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[   10.228301] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.228302] usb usb9: Product: OHCI PCI host controller
[   10.228304] usb usb9: Manufacturer: Linux 4.12.14-lp151.28.7-default ohci_hcd
[   10.228305] usb usb9: SerialNumber: 0000:00:14.5
[   10.228537] hub 9-0:1.0: USB hub found
[   10.228593] hub 9-0:1.0: 2 ports detected
[   10.323229] systemd-journald[147]: Received SIGTERM from PID 1 (systemd).
[   10.492197] usb 7-3: new full-speed USB device number 2 using ohci-pci
[   10.563795] systemd: 16 output lines suppressed due to ratelimiting
[   10.695466] usb 7-3: New USB device found, idVendor=0a5c, idProduct=21f1
[   10.695470] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.695471] usb 7-3: Product: BCM20702A0
[   10.695473] usb 7-3: Manufacturer: Broadcom Corp
[   10.695474] usb 7-3: SerialNumber: 18CF5EB3A3D4
[   14.466173] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[   15.040914] systemd-journald[357]: Received request to flush runtime journal from PID 1
[   15.949906] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   15.949912] ACPI: Battery Slot [BAT0] (battery present)
[   15.950132] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
[   15.950190] ACPI: Sleep Button [SLPB]
[   15.950294] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
[   15.950414] ACPI: Lid Switch [LID]
[   15.950465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[   15.950510] ACPI: Power Button [PWRF]
[   15.955055] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.955558] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[   15.974595] thermal LNXTHERM:00: registered as thermal_zone0
[   15.974600] ACPI: Thermal Zone [CPUZ] (60 C)
[   15.998945] thermal LNXTHERM:01: registered as thermal_zone1
[   15.998951] ACPI: Thermal Zone [GFXZ] (0 C)
[   16.013954] thermal LNXTHERM:02: registered as thermal_zone2
[   16.013959] ACPI: Thermal Zone [EXTZ] (0 C)
[   16.028837] thermal LNXTHERM:03: registered as thermal_zone3
[   16.028842] ACPI: Thermal Zone [LOCZ] (0 C)
[   16.044104] thermal LNXTHERM:04: registered as thermal_zone4
[   16.044109] ACPI: Thermal Zone [BATZ] (28 C)
[   16.097134] acpi_cpufreq: overriding BIOS provided _PSD data
[   16.107801] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   16.107852] ACPI: AC Adapter [AC] (on-line)
[   16.152179] input: HP Wireless hotkeys as /devices/virtual/input/input13
[   16.274498] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B06 (\_SB.PCI0.SMBS.SMBO) (20170303/utaddress-213)
[   16.274511] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.319073] hp_accel: hardware type HPB64xx found
[   16.319906] lis3lv02d: 8 bits 3DC sensor found
[   16.369618] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
[   16.395097] parport_pc 00:04: reported by Plug and Play ACPI
[   16.395195] parport0: PC-style at 0x378, irq 5 [PCSPP,EPP]
[   16.473194] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   16.473273] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x16
[   16.473319] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   16.473331] sp5100_tco: Last reboot was not triggered by watchdog.
[   16.473387] sp5100_tco: initialized (0xffffc900006f9b00). heartbeat=60 sec (nowayout=0)
[   16.475066] input: PC Speaker as /devices/platform/pcspkr/input/input15
[   16.670171] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   16.670184] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[   16.680973] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90000701000, 34:64:a9:d0:c9:ba, XID 0c000800 IRQ 35
[   16.680977] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   16.912876] ppdev: user-space parallel port driver
[   16.978622] AVX version of gcm_enc/dec engaged.
[   16.978625] AES CTR mode by8 optimization enabled
[   17.149046] input: HP WMI hotkeys as /devices/virtual/input/input16
[   17.346858] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   17.769063] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input17
[   17.769137] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input18
[   17.769204] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input19
[   17.769270] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input20
[   17.906713] kvm: disabled by bios
[   17.939661] kvm: disabled by bios
[   17.989145] MCE: In-kernel MCE decoding enabled.
[   18.032169] EDAC amd64: Node 0: DRAM ECC disabled.
[   18.032172] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   18.073371] EDAC amd64: Node 0: DRAM ECC disabled.
[   18.073375] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   18.726120] Bluetooth: Core ver 2.22
[   18.726154] NET: Registered protocol family 31
[   18.726155] Bluetooth: HCI device and connection manager initialized
[   18.726160] Bluetooth: HCI socket layer initialized
[   18.726163] Bluetooth: L2CAP socket layer initialized
[   18.726171] Bluetooth: SCO socket layer initialized
[   18.767127] usbcore: registered new interface driver btusb
[   18.884493] Bluetooth: hci0: BCM: chip id 63
[   18.914497] Bluetooth: hci0: BCM20702A
[   18.916356] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[   18.954794] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2
[   18.954802] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21f1.hcd not found
[   19.024211] Adding 16777212k swap on /dev/sda3.  Priority:-1 extents:1 across:16777212k FS
[   21.320810] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
[   21.496780] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   26.851653] No iBFT detected.
[   27.086360] r8169 0000:01:00.0 eth0: link down
[   27.086523] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.087154] r8169 0000:01:00.0 eth0: link down
[   29.634420] r8169 0000:01:00.0 eth0: link up
[   29.634433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   29.708508] NET: Registered protocol family 17
[  773.925700] PM: Syncing filesystems ... done.
[  774.019716] PM: Preparing system for sleep (mem)
[  774.026796] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  774.028316] OOM killer disabled.
[  774.028317] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  774.029678] PM: Suspending system (mem)
[  774.029699] Suspending console(s) (use no_console_suspend to debug)
[  774.044825] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  774.045050] sd 0:0:0:0: [sda] Stopping disk
[  774.127648] parport_pc 00:04: disabled
[  774.609176] PM: suspend of devices complete after 579.234 msecs
[  774.609738] PM: late suspend of devices complete after 0.559 msecs
[  774.628391] PM: noirq suspend of devices complete after 18.647 msecs
[  774.628469] ACPI: Preparing to enter system sleep state S3
[  774.716399] ACPI : EC: event blocked
[  774.716400] ACPI : EC: EC stopped
[  774.716401] PM: Saving platform NVS memory
[  774.716514] Disabling non-boot CPUs ...
[  774.717062] Broke affinity for irq 26
[  774.718221] smpboot: CPU 1 is now offline
[  774.718778] ACPI: Low-level resume complete
[  774.718861] ACPI : EC: EC started
[  774.718862] PM: Restoring platform NVS memory
[  774.719046] LVT offset 0 assigned for vector 0x400
[  774.719320] Suspended for 2546.144 seconds
[  774.719341] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[  774.719342] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR00000413=0xc000000001000000)
[  774.719344] [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
[  774.719345] [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC0000408=0xc000000001000000)
[  774.719361] Enabling non-boot CPUs ...
[  774.719434] x86: Booting SMP configuration:
[  774.719435] smpboot: Booting Node 0 Processor 1 APIC 0x11
[  774.721830]  cache: parent cpu1 should not be sleeping
[  774.721921] microcode: CPU1: patch_level=0x06001119
[  774.722263] CPU1 is up
[  774.722665] ACPI: Waking up from system sleep state S3
[  774.901089] PM: noirq resume of devices complete after 38.978 msecs
[  774.901463] PM: early resume of devices complete after 0.327 msecs
[  774.901634] ACPI : EC: event unblocked
[  774.909709] sd 0:0:0:0: [sda] Starting disk
[  775.091102] r8169 0000:01:00.0 eth0: link down
[  775.093724] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[  775.093985] radeon 0000:00:01.0: WB enabled
[  775.093989] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000030000c00 and cpu addr 0xffff8801341c1c00
[  775.094370] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001235a18
[  775.114474] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000030000c18 and cpu addr 0xffff8801341c1c18
[  775.114476] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000030000c1c and cpu addr 0xffff8801341c1c1c
[  775.114478] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000030000c04 and cpu addr 0xffff8801341c1c04
[  775.114480] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000030000c08 and cpu addr 0xffff8801341c1c08
[  775.114481] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000030000c0c and cpu addr 0xffff8801341c1c0c
[  775.114483] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000030000c10 and cpu addr 0xffff8801341c1c10
[  775.132654] [drm] ring test on 0 succeeded in 2 usecs
[  775.132661] [drm] ring test on 3 succeeded in 3 usecs
[  775.132666] [drm] ring test on 4 succeeded in 3 usecs
[  775.178420] [drm] ring test on 5 succeeded in 1 usecs
[  775.198335] [drm] UVD initialized successfully.
[  775.224515] ata3: SATA link down (SStatus 0 SControl 300)
[  775.224544] ata4: SATA link down (SStatus 0 SControl 300)
[  775.224569] ata5: SATA link down (SStatus 0 SControl 300)
[  775.307937] [drm] ring test on 6 succeeded in 10 usecs
[  775.307951] [drm] ring test on 7 succeeded in 3 usecs
[  775.307951] [drm] VCE initialized successfully.
[  775.308013] [drm] ib test on ring 0 succeeded in 0 usecs
[  775.308066] [drm] ib test on ring 3 succeeded in 0 usecs
[  775.308117] [drm] ib test on ring 4 succeeded in 0 usecs
[  775.312908] usb 7-3: reset full-speed USB device number 2 using ohci-pci
[  775.330826] parport_pc 00:04: activated
[  775.337987] tpm tpm0: TPM is disabled/deactivated (0x7)
[  775.837211] [drm] ib test on ring 5 succeeded
[  776.381088] [drm] ib test on ring 6 succeeded
[  776.893088] [drm] ib test on ring 7 succeeded
[  776.918200] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826]
[  777.814324] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..]
[  777.814460] r8169 0000:01:00.0 eth0: link up
[  778.136927] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  778.173164] ata1.00: configured for UDMA/133
[  778.765430] PM: resume of devices complete after 3863.962 msecs
[  778.765982] PM: Finishing wakeup.
[  778.765984] OOM killer enabled.
[  778.765984] Restarting tasks ... 
[  778.766146] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.768980] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.769042] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.775447] pci_bus 0000:06: Allocating resources
[  778.775467] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.775622] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.775745] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.775787] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.775959] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.776125] pci 0000:00:14.4: PCI bridge to [bus 06]
[  778.776161] pcieport 0000:00:05.0: PCI bridge to [bus 02]
[  778.776165] pcieport 0000:00:05.0:   bridge window [io  0x3000-0x3fff]
[  778.776168] pcieport 0000:00:05.0:   bridge window [mem 0xd4000000-0xd4ffffff]
[  778.776172] pcieport 0000:00:05.0:   bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[  778.786879] done.
[  778.988986] Bluetooth: hci0: BCM: chip id 63
[  779.005980] Bluetooth: hci0: BCM20702A
[  779.007976] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[  779.007992] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2
[  779.007994] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21f1.hcd not found
