Installation Leap 15.1 - alles Standard Boot des Systems bringt grünen Bildschirm Seite mit schrägen kurzen Strichen Boot und Halt mit E Eingabe in der Bootzeile am Ende 3 (für init 3) Dann zypper addrepo –refresh ...NVIDIA Danach zypper se x11-video-nvidiaG04 Danach zypper se -s x11-video-nvidiaG04 Danach zypper in x11-video-nvidia-G04 Danach rm -v etcX11/org.conf Eine Auflösung von 1920x1080 kriege ich auch mit xrandr --newmode oder addmode nicht hin!!!!!!!!! Hier noch die Systemausgaben: linux-sahc:/home/sto # lspci|grep VGA 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6100 nForce 405] (rev a2) linux-sahc:/home/sto # lscpu |grep Arch Architektur:             x86_64 linux-sahc:/home/sto # hwinfo --gfxcard|grep Model  Model: "nVidia GeForce 6100 nForce 405" linux-sahc:/home/sto # xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 640 x 480, maximum 640 x 480 default connected primary 640x480+0+0 0mm x 0mm   640x480       73.00*   linux-sahc:/home/sto # /usr/sbin/hwinfo --gfx 19: PCI 0d.0: 0300 VGA compatible controller (VGA)                 [Created at pci.386]  Unique ID: qnJ_.j6YYE7k3pIC  SysFS ID: /devices/pci0000:00/0000:00:0d.0  SysFS BusID: 0000:00:0d.0  Hardware Class: graphics card  Model: "nVidia GeForce 6100 nForce 405"  Vendor: pci 0x10de "nVidia Corporation"  Device: pci 0x03d1 "GeForce 6100 nForce 405"  SubVendor: pci 0x1462 "Micro-Star International Co., Ltd. [MSI]"  SubDevice: pci 0x7309    Revision: 0xa2  Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)  Memory Range: 0xfc000000-0xfcffffff (rw,non-prefetchable)  Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)  IRQ: 10 (no events)  I/O Ports: 0x3c0-0x3df (rw)  Module Alias: "pci:v000010DEd000003D1sv00001462sd00007309bc03sc00i00"  Driver Info #0:    XFree86 v4 Server Module: nv  Config Status: cfg=no, avail=yes, need=no, active=unknown Primary display adapter: #19 linux-sahc:/home/sto # cvt 1920 1080 60 # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync linux-sahc:/home/sto # uname -a Linux linux-sahc.fritz.box 4.12.14-lp151.28.36-default #1 SMP Fri Dec 6 13:50:27 UTC 2019 (8f4a495) x86_64 x86_64 x86_64 GNU/Linux linux-sahc:/home/sto # zypper lr -d #  | Alias                     | Name                                                    | Aktiviert | GPG-Überprüfung | Aktualisierung | Priorität | Typ    | URI                                                                      | Dienst ---+---------------------------+---------------------------------------------------- -----+-----------+-----------------+----------------+-----------+--------+---------- ----------------------------------------------------------------+------- 1 | nvidia                    | nvidia                                                  | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | https://d ownload.nvidia.com/opensuse/leap/15.1                           |         2 | openSUSE-Leap-15.1-1      | openSUSE-Leap-15.1-1                                    | Nein      | ----            | ----           |   99      | rpm-md | cd:/?devi ces=/dev/disk/by-id/ata-HL-DT-STDVD-ROM_GDR8163B                |         3 | repo-debug                | Debug Repository                                        | Nein      | ----            | ----           |   99      | NONE   | http://do wnload.opensuse.org/debug/distribution/leap/15.1/repo/oss/      |         4 | repo-debug-non-oss        | Debug Repository (Non-OSS)                              | Nein      | ----            | ----           |   99      | NONE   | http://do wnload.opensuse.org/debug/distribution/leap/15.1/repo/non-oss/  |         5 | repo-debug-update         | Update Repository (Debug)                               | Nein      | ----            | ----           |   99      | NONE   | http://do wnload.opensuse.org/debug/update/leap/15.1/oss/                 |         6 | repo-debug-update-non-oss | Update Repository (Debug, Non-OSS)                      | Nein      | ----            | ----           |   99      | NONE   | http://do wnload.opensuse.org/debug/update/leap/15.1/non-oss/             |         7 | repo-non-oss              | Non-OSS Repository                                      | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://do wnload.opensuse.org/distribution/leap/15.1/repo/non-oss/        |         8 | repo-oss                  | Haupt-Repository                                        | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://do wnload.opensuse.org/distribution/leap/15.1/repo/oss/            |         9 | repo-source               | Source Repository                                       | Nein      | ----            | ----           |   99      | NONE   | http://do wnload.opensuse.org/source/distribution/leap/15.1/repo/oss/     |         10 | repo-source-non-oss       | Source Repository (Non-OSS)                             | Nein      | ----            | ----           |   99      | NONE   | http://do wnload.opensuse.org/source/distribution/leap/15.1/repo/non-oss/ |         11 | repo-update               | Hauptaktualisierungs-Repository                         | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://do wnload.opensuse.org/update/leap/15.1/oss                        |         12 | repo-update-non-oss       | Aktualisierungs-Repository (Nicht-Open-Source-Softw are) | Ja        | (r ) Ja         | Ja             |   99      | rpm-md | http://do wnload.opensuse.org/update/leap/15.1/non-oss/                   |         linux-sahc:/home/sto # zypper se -si nvidia kernel Repository-Daten werden geladen... Installierte Pakete werden gelesen... S  | Name                      | Typ   | Version                             | Arch  | Repository                       ---+---------------------------+-------+-------------------------------------+------ --+-------------------------------- i+ | kernel-default            | Paket | 4.12.14-lp151.28.36.1               | x86_6 4 | Hauptaktualisierungs-Repository i  | kernel-default-devel      | Paket | 4.12.14-lp151.28.36.1               | x86_6 4 | Hauptaktualisierungs-Repository i  | kernel-devel              | Paket | 4.12.14-lp151.28.36.1               | noarc h | Hauptaktualisierungs-Repository i  | kernel-firmware           | Paket | 20190618-lp151.2.6.1                | noarc h | Hauptaktualisierungs-Repository i  | kernel-macros             | Paket | 4.12.14-lp151.28.36.1               | noarc h | Hauptaktualisierungs-Repository i  | nvidia-computeG04         | Paket | 390.132-lp151.6.1                   | x86_6 4 | nvidia                           i  | nvidia-gfxG04-kmp-default | Paket | 390.132_k4.12.14_lp151.27-lp151.6.1 | x86_6 4 | nvidia                           i  | nvidia-glG04              | Paket | 390.132-lp151.6.1                   | x86_6 4 | nvidia                           i+ | x11-video-nvidiaG04       | Paket | 390.132-lp151.6.1                   | x86_6 4 | nvidia                           linux-sahc:/home/sto # zypper se -si nvidia kernel Repository-Daten werden geladen... Installierte Pakete werden gelesen... S  | Name                      | Typ   | Version                             | Arch  | Repository                       ---+---------------------------+-------+-------------------------------------+------ --+-------------------------------- i+ | kernel-default            | Paket | 4.12.14-lp151.28.36.1               | x86_6 4 | Hauptaktualisierungs-Repository i  | kernel-default-devel      | Paket | 4.12.14-lp151.28.36.1               | x86_6 4 | Hauptaktualisierungs-Repository i  | kernel-devel              | Paket | 4.12.14-lp151.28.36.1               | noarc h | Hauptaktualisierungs-Repository i  | kernel-firmware           | Paket | 20190618-lp151.2.6.1                | noarc h | Hauptaktualisierungs-Repository i  | kernel-macros             | Paket | 4.12.14-lp151.28.36.1               | noarc h | Hauptaktualisierungs-Repository i  | nvidia-computeG04         | Paket | 390.132-lp151.6.1                   | x86_6 4 | nvidia                           i  | nvidia-gfxG04-kmp-default | Paket | 390.132_k4.12.14_lp151.27-lp151.6.1 | x86_6 4 | nvidia                           i  | nvidia-glG04              | Paket | 390.132-lp151.6.1                   | x86_6 4 | nvidia                           i+ | x11-video-nvidiaG04       | Paket | 390.132-lp151.6.1                   | x86_6 4 | nvidia                           linux-sahc:/home/sto # cat /var/log/Xorg.0.log [    23.084] (--) Log file renamed from "/var/log/Xorg.pid-1148.log" to "/var/log/Xorg.0.log" [    23.098]   X.Org X Server 1.20.3 X Protocol Version 11, Revision 0 [    23.098] Build Operating System: openSUSE SUSE LINUX [    23.098] Current Operating System: Linux localhost 4.12.14-lp151.28.36-default #1 SMP Fri Dec 6 13:50:27 UTC 2019 (8f4a495) x86_64 [    23.098] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.36-default root=UUID=2fd593bd-3876-477a-b 26e-db9b1f021d83 splash=silent resume=/dev/disk/by-uuid/9eff16b0-c677-4eb7-9549-29f5a62dc950 mitigations=auto quiet [    23.098] Build Date: 18 January 2019  12:00:00PM [    23.098]    [    23.098] Current version of pixman: 0.34.0 [    23.098]    Before reporting problems, check http://wiki.x.org        to make sure that you have the latest version. [    23.098] Markers: (--) probed, (**) from config file, (==) default setting,        (++) from command line, (!!) notice, (II) informational,        (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [    23.098] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 31 14:19:24 2019 [    23.116] (==) Using config directory: "/etc/X11/xorg.conf.d" [    23.116] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [    23.124] (==) No Layout section.  Using the first Screen section. [    23.124] (**) |-->Screen "Default Screen" (0) [    23.124] (**) |   |-->Monitor "" [    23.125] (==) No monitor specified for screen "Default Screen".        Using a default monitor configuration. [    23.125] (==) Automatically adding devices [    23.125] (==) Automatically enabling devices [    23.125] (==) Automatically adding GPU devices [    23.125] (==) Max clients allowed: 256, resource mask: 0x1fffff [    23.200] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [    23.200]    Entry deleted from font path. [    23.309] (==) FontPath set to:        /usr/share/fonts/misc:unscaled,        /usr/share/fonts/Type1/,        /usr/share/fonts/100dpi:unscaled,        /usr/share/fonts/75dpi:unscaled,        /usr/share/fonts/ghostscript/,        /usr/share/fonts/cyrillic:unscaled,        /usr/share/fonts/truetype/,        built-ins [    23.309] (==) ModulePath set to "/usr/lib64/xorg/modules" [    23.309] (WW) Ignoring unrecognized extension "XFree86-DGA" [    23.309] (II) The server relies on udev to provide the list of input devices.        If no devices become available, reconfigure udev or disable AutoAddDevices. [    23.309] (II) Loader magic: 0x55990dab3d20 [    23.309] (II) Module ABI versions: [    23.309]    X.Org ANSI C Emulation: 0.4 [    23.309]    X.Org Video Driver: 24.0 [    23.309]    X.Org XInput driver : 24.1 [    23.309]    X.Org Server Extension : 10.0 [    23.310] (++) using VT number 7 [    23.310] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling login d integration [    23.312] (--) PCI:*(0@0:13:0) 10de:03d1:1462:7309 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc0 00000/16777216, BIOS @ 0x????????/131072 [    23.312] (II) LoadModule: "glx" [    23.326] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [    24.278] (II) Module glx: vendor="NVIDIA Corporation" [    24.278]    compiled for 4.0.2, module version = 1.0.0 [    24.278]    Module class: X.Org Server Extension [    24.278] (II) NVIDIA GLX Module  390.132  Fri Nov  1 04:00:46 PDT 2019 [    24.327] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers [    24.327] (==) Matched nvidia as autoconfigured driver 0 [    24.327] (==) Matched nouveau as autoconfigured driver 1 [    24.327] (==) Matched nv as autoconfigured driver 2 [    24.327] (==) Matched modesetting as autoconfigured driver 3 [    24.327] (==) Matched fbdev as autoconfigured driver 4 [    24.327] (==) Matched vesa as autoconfigured driver 5 [    24.327] (==) Assigned the driver to the xf86ConfigLayout [    24.327] (II) LoadModule: "nvidia" [    24.327] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so [    24.483] (II) Module nvidia: vendor="NVIDIA Corporation" [    24.483]    compiled for 4.0.2, module version = 1.0.0 [    24.483]    Module class: X.Org Video Driver [    24.483] (II) LoadModule: "nouveau" [    24.484] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so [    24.617] (II) Module nouveau: vendor="X.Org Foundation" [    24.617]    compiled for 1.20.3, module version = 1.0.15 [    24.617]    Module class: X.Org Video Driver [    24.617]    ABI class: X.Org Video Driver, version 24.0 [    24.617] (II) LoadModule: "nv" [    24.617] (WW) Warning, couldn't open module nv [    24.617] (EE) Failed to load module "nv" (module does not exist, 0) [    24.617] (II) LoadModule: "modesetting" [    24.617] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [    24.629] (II) Module modesetting: vendor="X.Org Foundation" [    24.629]    compiled for 1.20.3, module version = 1.20.3 [    24.629]    Module class: X.Org Video Driver [    24.629]    ABI class: X.Org Video Driver, version 24.0 [    24.629] (II) LoadModule: "fbdev" [    24.629] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [    24.663] (II) Module fbdev: vendor="X.Org Foundation" [    24.663]    compiled for 1.20.3, module version = 0.5.0 [    24.663]    Module class: X.Org Video Driver [    24.663]    ABI class: X.Org Video Driver, version 24.0 [    24.663] (II) LoadModule: "vesa" [    24.663] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [    24.664] (II) Module vesa: vendor="X.Org Foundation" [    24.664]    compiled for 1.20.3, module version = 2.4.0 [    24.664]    Module class: X.Org Video Driver [    24.664]    ABI class: X.Org Video Driver, version 24.0 [    24.664] (II) NVIDIA dlloader X Driver  390.132  Fri Nov  1 03:36:28 PDT 2019 [    24.664] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [    24.664] (II) NOUVEAU driver   [    24.664] (II) NOUVEAU driver for NVIDIA chipset families : [    24.664]    RIVA TNT        (NV04) [    24.664]    RIVA TNT2       (NV05) [    24.664]    GeForce 256     (NV10) [    24.664]    GeForce 2       (NV11, NV15) [    24.664]    GeForce 4MX     (NV17, NV18) [    24.664]    GeForce 3       (NV20) [    24.664]    GeForce 4Ti     (NV25, NV28) [    24.664]    GeForce FX      (NV3x) [    24.664]    GeForce 6       (NV4x) [    24.664]    GeForce 7       (G7x) [    24.664]    GeForce 8       (G8x) [    24.664]    GeForce GTX 200 (NVA0) [    24.664]    GeForce GTX 400 (NVC0) [    24.664] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [    24.664] (II) FBDEV: driver for framebuffer: fbdev [    24.664] (II) VESA: driver for VESA chipsets: vesa [    24.671] (II) Loading sub module "fb" [    24.671] (II) LoadModule: "fb" [    24.671] (II) Loading /usr/lib64/xorg/modules/libfb.so [    24.678] (II) Module fb: vendor="X.Org Foundation" [    24.678]    compiled for 1.20.3, module version = 1.0.0 [    24.678]    ABI class: X.Org ANSI C Emulation, version 0.4 [    24.678] (II) Loading sub module "wfb" [    24.678] (II) LoadModule: "wfb" [    24.679] (II) Loading /usr/lib64/xorg/modules/libwfb.so [    24.688] (II) Module wfb: vendor="X.Org Foundation" [    24.688]    compiled for 1.20.3, module version = 1.0.0 [    24.688]    ABI class: X.Org ANSI C Emulation, version 0.4 [    24.688] (II) Loading sub module "ramdac" [    24.688] (II) LoadModule: "ramdac" [    24.688] (II) Module "ramdac" already built-in [    24.688] (WW) NVIDIA(0): The NVIDIA GeForce 6100 nForce 405 GPU installed in this [    24.688] (WW) NVIDIA(0):     system is supported through the NVIDIA 304.xx Legacy [    24.688] (WW) NVIDIA(0):     drivers. Please visit [    24.688] (WW) NVIDIA(0):     http://www.nvidia.com/object/unix.html for more [    24.688] (WW) NVIDIA(0):     information.  The 390.132 NVIDIA driver will ignore this [    24.688] (WW) NVIDIA(0):     GPU.  Continuing probe...   [    24.824] (EE) [drm] Failed to open DRM device for pci:0000:00:0d.0: -19 [    24.824] (EE) open /dev/dri/card0: No such file or directory [    24.824] (WW) Falling back to old probe method for modesetting [    24.824] (EE) open /dev/dri/card0: No such file or directory [    24.824] (II) Loading sub module "fbdevhw" [    24.824] (II) LoadModule: "fbdevhw" [    24.824] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [    24.825] (II) Module fbdevhw: vendor="X.Org Foundation" [    24.825]    compiled for 1.20.3, module version = 0.0.2 [    24.825]    ABI class: X.Org Video Driver, version 24.0 [    24.825] (EE) Unable to find a valid framebuffer device [    24.825] (WW) Falling back to old probe method for fbdev [    24.825] (II) Loading sub module "fbdevhw" [    24.825] (II) LoadModule: "fbdevhw" [    24.825] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [    24.825] (II) Module fbdevhw: vendor="X.Org Foundation" [    24.825]    compiled for 1.20.3, module version = 0.0.2 [    24.825]    ABI class: X.Org Video Driver, version 24.0 [    24.825] (II) FBDEV(2): using default device [    24.825] (EE) Screen 0 deleted because of no matching config section. [    24.825] (II) UnloadModule: "modesetting" [    24.825] (EE) Screen 0 deleted because of no matching config section. [    24.825] (II) UnloadModule: "fbdev" [    24.825] (II) UnloadSubModule: "fbdevhw" [    24.825] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32 [    24.825] (==) FBDEV(0): RGB weight 888 [    24.825] (==) FBDEV(0): Default visual is TrueColor [    24.825] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) [    24.825] (II) FBDEV(0): hardware: VESA VGA (video memory: 1216kB) [    24.825] (DB) xf86MergeOutputClassOptions unsupported bus type 0 [    24.826] (II) FBDEV(0): checking modes against framebuffer device... [    24.826] (II) FBDEV(0):     mode "1920x1080_60.00" not found [    24.826] (II) FBDEV(0): checking modes against monitor... [    24.826] (II) FBDEV(0): Virtual size is 640x480 (pitch 640) [    24.826] (**) FBDEV(0):  Built-in mode "current": 30.7 MHz, 36.9 kHz, 73.3 Hz [    24.826] (II) FBDEV(0): Modeline "current"x0.0   30.72  640 672 752 832  480 484 488 504 -hsync -vsync -csync (36 .9 kHz b) [    24.826] (==) FBDEV(0): DPI set to (96, 96) [    24.826] (II) Loading sub module "fb" [    24.826] (II) LoadModule: "fb" [    24.826] (II) Loading /usr/lib64/xorg/modules/libfb.so [    24.826] (II) Module fb: vendor="X.Org Foundation" [    24.826]    compiled for 1.20.3, module version = 1.0.0 [    24.826]    ABI class: X.Org ANSI C Emulation, version 0.4 [    24.826] (**) FBDEV(0): using shadow framebuffer [    24.826] (II) Loading sub module "shadow" [    24.826] (II) LoadModule: "shadow" [    24.826] (II) Loading /usr/lib64/xorg/modules/libshadow.so [    24.835] (II) Module shadow: vendor="X.Org Foundation" [    24.835]    compiled for 1.20.3, module version = 1.1.0 [    24.835]    ABI class: X.Org ANSI C Emulation, version 0.4 [    24.835] (II) UnloadModule: "vesa" [    24.835] (II) Unloading vesa [    24.835] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling) [    24.835] (==) FBDEV(0): Backing store enabled [    24.836] (==) FBDEV(0): DPMS enabled [    24.836] (II) Initializing extension Generic Event Extension [    24.836] (II) Initializing extension SHAPE [    24.836] (II) Initializing extension MIT-SHM [    24.836] (II) Initializing extension XInputExtension [    24.837] (II) Initializing extension XTEST [    24.837] (II) Initializing extension BIG-REQUESTS [    24.837] (II) Initializing extension SYNC [    24.837] (II) Initializing extension XKEYBOARD [    24.837] (II) Initializing extension XC-MISC [    24.838] (II) Initializing extension SECURITY [    24.838] (II) Initializing extension XFIXES [    24.838] (II) Initializing extension RENDER [    24.838] (II) Initializing extension RANDR [    24.839] (II) Initializing extension COMPOSITE [    24.839] (II) Initializing extension DAMAGE [    24.839] (II) Initializing extension MIT-SCREEN-SAVER [    24.839] (II) Initializing extension DOUBLE-BUFFER [    24.839] (II) Initializing extension RECORD [    24.840] (II) Initializing extension DPMS [    24.840] (II) Initializing extension Present [    24.840] (II) Initializing extension DRI3 [    24.840] (II) Initializing extension X-Resource [    24.840] (II) Initializing extension XVideo [    24.840] (II) Initializing extension XVideo-MotionCompensation [    24.840] (II) Initializing extension XFree86-VidModeExtension [    24.841] (II) Initializing extension XFree86-DGA [    24.841] (II) Initializing extension XFree86-DRI [    24.841] (II) Initializing extension DRI2 [    24.841] (II) Initializing extension GLX [    24.841] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [    25.748] (II) config/udev: Adding input device Power Button (/dev/input/event3) [    25.748] (**) Power Button: Applying InputClass "evdev keyboard catchall" [    25.748] (**) Power Button: Applying InputClass "system-keyboard" [    25.748] (**) Power Button: Applying InputClass "evdev keyboard catchall" [    25.748] (**) Power Button: Applying InputClass "libinput keyboard catchall" [    25.748] (II) LoadModule: "libinput" [    25.748] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [    25.914] (II) Module libinput: vendor="X.Org Foundation" [    25.914]    compiled for 1.20.3, module version = 0.28.1 [    25.914]    Module class: X.Org XInput Driver [    25.914]    ABI class: X.Org XInput driver, version 24.1 [    25.914] (II) Using input driver 'libinput' for 'Power Button' [    25.914] (**) Power Button: always reports core events [    25.914] (**) Option "Device" "/dev/input/event3" [    25.915] (**) Option "_source" "server/udev" [    25.915] (II) event3  - Power Button: is tagged by udev as: Keyboard [    25.915] (II) event3  - Power Button: device is a keyboard [    25.915] (II) event3  - Power Button: device removed [    25.928] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" [    25.928] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [    25.928] (**) Option "xkb_model" "microsoftpro" [    25.928] (**) Option "xkb_layout" "de" [    25.928] (**) Option "xkb_variant" "nodeadkeys" [    25.928] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [    25.999] (II) event3  - Power Button: is tagged by udev as: Keyboard [    25.999] (II) event3  - Power Button: device is a keyboard [    25.999] (II) config/udev: Adding input device Power Button (/dev/input/event2) [    25.999] (**) Power Button: Applying InputClass "evdev keyboard catchall" [    25.999] (**) Power Button: Applying InputClass "system-keyboard" [    25.999] (**) Power Button: Applying InputClass "evdev keyboard catchall" [    25.999] (**) Power Button: Applying InputClass "libinput keyboard catchall" [    25.999] (II) Using input driver 'libinput' for 'Power Button' [    25.999] (**) Power Button: always reports core events [    25.999] (**) Option "Device" "/dev/input/event2" [    25.999] (**) Option "_source" "server/udev" [    26.000] (II) event2  - Power Button: is tagged by udev as: Keyboard [    26.000] (II) event2  - Power Button: device is a keyboard [    26.000] (II) event2  - Power Button: device removed [    26.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2" [    26.020] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [    26.020] (**) Option "xkb_model" "microsoftpro" [    26.020] (**) Option "xkb_layout" "de" [    26.020] (**) Option "xkb_variant" "nodeadkeys" [    26.020] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [    26.020] (II) event2  - Power Button: is tagged by udev as: Keyboard [    26.020] (II) event2  - Power Button: device is a keyboard [    26.021] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event9) [    26.021] (II) No input driver specified, ignoring this device. [    26.021] (II) This device may have been added with another device file. [    26.021] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event10) [    26.021] (II) No input driver specified, ignoring this device. [    26.021] (II) This device may have been added with another device file. [    26.021] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event11) [    26.021] (II) No input driver specified, ignoring this device. [    26.021] (II) This device may have been added with another device file. [    26.022] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event12) [    26.022] (II) No input driver specified, ignoring this device. [    26.022] (II) This device may have been added with another device file. [    26.022] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event13) [    26.022] (II) No input driver specified, ignoring this device. [    26.022] (II) This device may have been added with another device file. [    26.022] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) [    26.022] (II) No input driver specified, ignoring this device. [    26.022] (II) This device may have been added with another device file. [    26.023] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event6) [    26.023] (II) No input driver specified, ignoring this device. [    26.023] (II) This device may have been added with another device file. [    26.023] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7) [    26.023] (II) No input driver specified, ignoring this device. [    26.023] (II) This device may have been added with another device file. [    26.023] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event8) [    26.023] (II) No input driver specified, ignoring this device. [    26.023] (II) This device may have been added with another device file. [    26.024] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [    26.024] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [    26.024] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [    26.024] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [    26.024] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [    26.024] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [    26.024] (**) AT Translated Set 2 keyboard: always reports core events [    26.024] (**) Option "Device" "/dev/input/event0" [    26.024] (**) Option "_source" "server/udev" [    26.024] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [    26.024] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard [    26.024] (II) event0  - AT Translated Set 2 keyboard: device removed [    26.044] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [    26.044] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8) [    26.044] (**) Option "xkb_model" "microsoftpro" [    26.044] (**) Option "xkb_layout" "de" [    26.044] (**) Option "xkb_variant" "nodeadkeys" [    26.044] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [    26.044] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [    26.044] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard [    26.045] (II) config/udev: Adding input device GenPS/2 Genius Mouse (/dev/input/event1) [    26.045] (**) GenPS/2 Genius Mouse: Applying InputClass "evdev pointer catchall" [    26.045] (**) GenPS/2 Genius Mouse: Applying InputClass "evdev pointer catchall" [    26.045] (**) GenPS/2 Genius Mouse: Applying InputClass "libinput pointer catchall" [    26.045] (II) Using input driver 'libinput' for 'GenPS/2 Genius Mouse' [    26.045] (**) GenPS/2 Genius Mouse: always reports core events [    26.045] (**) Option "Device" "/dev/input/event1" [    26.045] (**) Option "_source" "server/udev" [    26.045] (II) event1  - GenPS/2 Genius Mouse: is tagged by udev as: Mouse [    26.045] (II) event1  - GenPS/2 Genius Mouse: device is a pointer [    26.045] (II) event1  - GenPS/2 Genius Mouse: device removed [    26.076] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [    26.076] (II) XINPUT: Adding extended input device "GenPS/2 Genius Mouse" (type: MOUSE, id 9) [    26.076] (**) Option "AccelerationScheme" "none" [    26.076] (**) GenPS/2 Genius Mouse: (accel) selected scheme none/0 [    26.076] (**) GenPS/2 Genius Mouse: (accel) acceleration factor: 2.000 [    26.076] (**) GenPS/2 Genius Mouse: (accel) acceleration threshold: 4 [    26.076] (II) event1  - GenPS/2 Genius Mouse: is tagged by udev as: Mouse [    26.076] (II) event1  - GenPS/2 Genius Mouse: device is a pointer [    26.077] (II) config/udev: Adding input device GenPS/2 Genius Mouse (/dev/input/mouse0) [    26.077] (II) No input driver specified, ignoring this device. [    26.077] (II) This device may have been added with another device file. [    26.077] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [    26.077] (II) No input driver specified, ignoring this device. [    26.077] (II) This device may have been added with another device file.