Hallo,
ich mache meine ersten Schritte in openSUSE (KDE) und bin ein wenig überrascht, was man alles nch per Hand nachinstallieren muss, damit das System letztlich läuft.
Momentan scheitere ich an der Installation meines Druckers HP Laserjet 1600.
Info
$ lsusb -v
Bus 001 Device 009: ID 03f0:3a17 Hewlett-Packard Printing Support
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x03f0 Hewlett-Packard
idProduct 0x3a17 Printing Support
bcdDevice 1.00
iManufacturer 1 Hewlett-Packard
iProduct 2 HP Color LaserJet 1600
iSerial 3 JV2ADJE
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Alles anzeigen
ZitatVersuch 1
Yast (GUI) -> Hardware -> Drucker -> Druckerkonfigurationen -> Hinzufügen -> *Yast sucht, findet aber nichts* -> Detect More -> -> *Yast sucht, findet aber nichts* -> HP-Setup ausführen
HP-Setup (GUI) -> USB -> next -> *mein Drucker wird angezeigt* -> next -> Treiberplugin-Installation -> 2 Möglichkeiten:
a) Installation direkt vom HP-Server -> *Network connection not detected* obwohl Internetverbindung steht und auch funktioniert
b) Installation mit lokaler PlugIn-Datei -> Runtergeladen bei HP und "hplip-3.10.9.run" gespeichert und ausgewählt -> next-Knopf grau - Ende
ZitatVersuch 2
foo2zjs nach Anleitung -> auch kein Erfolg
Kann mir jemand einen Tipp geben, wie das Problem zu lösen geht. Wenn weitere Informationen gebraucht werden einfach fragen...
Gruß Alex