Beiträge von warumSUSE

  • Problem mit eth0

    Hallo Sauerland,
    anbei die Info.
    Danke
    warumSUSE


    gs01293:~ # hwinfo --netcard
    22: PCI 200.0: 0200 Ethernet controller
    [Created at pci.318]
    Unique ID: B35A.JAkiQ7HlCp7
    Parent ID: z8Q3.aLeKPoEacED
    SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0
    SysFS BusID: 0000:02:00.0
    Hardware Class: network
    Model: "Attansic Ethernet controller"
    Vendor: pci 0x1969 "Attansic Technology Corp."
    Device: pci 0x1083
    SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
    SubDevice: pci 0x050e
    Revision: 0xc0
    Memory Range: 0xc0200000-0xc023ffff (rw,non-prefetchable)
    I/O Ports: 0x2000-0x2fff (rw)
    IRQ: 10 (no events)
    Module Alias: "pci:v00001969d00001083sv00001025sd0000050Ebc02sc00i00"
    Config Status: cfg=no, avail=yes, need=no, active=unknown
    Attached to: #13 (PCI bridge)


    23: PCI 300.0: 0282 WLAN controller
    [Created at pci.318]
    Unique ID: y9sn.eLj0E7FulB6
    Parent ID: qTvu.cAXqMxT_f+D
    SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
    SysFS BusID: 0000:03:00.0
    Hardware Class: network
    Model: "Atheros WLAN controller"
    Vendor: pci 0x168c "Atheros Communications Inc."
    Device: pci 0x002e
    SubVendor: pci 0x11ad "Lite-On Communications Inc"
    SubDevice: pci 0x6603
    Revision: 0x01
    Driver: "ath9k"
    Driver Modules: "ath9k"
    Device File: wlan0
    Features: WLAN
    Memory Range: 0xc0100000-0xc010ffff (rw,non-prefetchable)
    IRQ: 17 (no events)
    HW Address: d0:df:9a:ee:43:61
    Link detected: no
    WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
    WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
    WLAN encryption modes: WEP40 WEP104 TKIP CCMP
    WLAN authentication modes: open sharedkey wpa-psk wpa-eap
    Module Alias: "pci:v0000168Cd0000002Esv000011ADsd00006603bc02sc80i00"
    Driver Info #0:
    Driver Status: ath9k is active
    Driver Activation Cmd: "modprobe ath9k"
    Config Status: cfg=no, avail=yes, need=no, active=unknown
    Attached to: #14 (PCI bridge)

  • Problem mit eth0

    Ich hab openSUSE 11.4 auf Acer Aspire 7750G installiert, hab aber Problem mit Attansic Ethernet controller (Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)).
    In diesem Forum unter "Problem mit eth0" hab ich versucht, das Problem zu lösen, klappt aber nicht.
    Problem: Link http://partner.atheros.com/Drivers.aspx existiert nicht.
    Kann mir bitte jemand helfen, den richtigen Treiber zu bekommen?
    Ich hab gegoogelt, aber komme nicht weiter.


    Danke
    warumSUSE