Darf ich noch einen kurzen Kommentar dazu geben ? Ja ?
Also im BIOS AHCI einstellen -- wenn das nicht erfolgt ist, funktioniert der TRIMM-Befehl nicht.
Das hat zur Folge, das die Festplatte ruck-zuck voll ist und nichts mehr geht.
Gruß von einem Leidgeplagten
Beiträge von uludur
-
-
Liebe Forum-Mitglieder,
nach einem Crash mußte ich meine gut laufende Suse 12.2 ersetzten. Ich habe eine Neuinstallation von Opensuse 13.1 64b durchgeführt und hänge seit 14 Tagen an der Installation der TV-Karte Hauppauge WinTV-S plus. Die KDE Version ist 4.11.5. Die Packman-Repositories sind geladen.
hwinfo --tvZitatAlles anzeigenP { margin-bottom: 0.21cm; }5: PCI 108.0: 11200 TV Card
[Created at pci.319]
Unique ID: 75Hn.5NNZY4SD7PC
Parent ID: RE4e.tJ14sSfuV7A
SysFS ID:
/devices/pci0000:00/0000:00:08.0/0000:01:08.0SysFS BusID: 0000:01:08.0
Hardware Class: tv card
Model: "Hauppauge computer works
Nova-S-Plus DVB-S"Vendor: pci 0x14f1 "Conexant
Systems, Inc."Device: pci 0x8800 "CX23880/1/2/3
PCI Video and Audio Decoder"SubVendor: pci 0x0070 "Hauppauge
computer works Inc."SubDevice: pci 0x9202 "Nova-S-Plus
DVB-S"Revision: 0x05
Driver: "cx8800"
Driver Modules: "cx8800"
Memory Range: 0xfa000000-0xfaffffff
(rw,non-prefetchable)IRQ: 16 (no events)
Module Alias:
"pci:v000014F1d00008800sv00000070sd00009202bc04sc00i00"Driver Info #0:
Driver Status: cx8800 is active
Driver Activation Cmd: "modprobe
cx8800"Config Status: cfg=new, avail=yes,
need=no, active=unknownAttached to: #13 (PCI bridge)
26: PCI 108.1: 11200 TV Card
[Created at pci.319]
Unique ID: _Pmc.cnJJ1fZwenC
Parent ID: RE4e.tJ14sSfuV7A
SysFS ID:
/devices/pci0000:00/0000:00:08.0/0000:01:08.1SysFS BusID: 0000:01:08.1
Hardware Class: tv card
Model: "Conexant CX23880/1/2/3
PCI Video and Audio Decoder [Audio Port]"Vendor: pci 0x14f1 "Conexant
Systems, Inc."Device: pci 0x8801 "CX23880/1/2/3
PCI Video and Audio Decoder [Audio Port]"SubVendor: pci 0x0070 "Hauppauge
computer works Inc."SubDevice: pci 0x9202
Revision: 0x05
Driver: "cx88_audio"
Driver Modules: "cx88_alsa"
Memory Range: 0xf9000000-0xf9ffffff
(rw,non-prefetchable)IRQ: 16 (no events)
Module Alias:
"pci:v000014F1d00008801sv00000070sd00009202bc04sc80i00"Driver Info #0:
Driver Status: cx88-alsa is active
Driver Activation Cmd: "modprobe
cx88-alsa"Config Status: cfg=new, avail=yes,
need=no, active=unknownAttached to: #13 (PCI bridge)
27: PCI 108.2: 11200 TV Card
[Created at pci.319]
Unique ID: rkFS.7CG3WDhdAAD
Parent ID: RE4e.tJ14sSfuV7A
SysFS ID:
/devices/pci0000:00/0000:00:08.0/0000:01:08.2SysFS BusID: 0000:01:08.2
Hardware Class: tv card
Model: "Conexant CX23880/1/2/3
PCI Video and Audio Decoder [MPEG Port]"Vendor: pci 0x14f1 "Conexant
Systems, Inc."Device: pci 0x8802 "CX23880/1/2/3
PCI Video and Audio Decoder [MPEG Port]"SubVendor: pci 0x0070 "Hauppauge
computer works Inc."SubDevice: pci 0x9202
Revision: 0x05
Driver: "cx88-mpeg driver
manager"Driver Modules: "cx8802"
Memory Range: 0xf8000000-0xf8ffffff
(rw,non-prefetchable)IRQ: 16 (no events)
Module Alias:
"pci:v000014F1d00008802sv00000070sd00009202bc04sc80i00"Driver Info #0:
Driver Status: cx8802 is active
Driver Activation Cmd: "modprobe
cx8802"Config Status: cfg=new, avail=yes,
need=no, active=unknownAttached to: #13 (PCI bridge)
dmesg|grep cx
ZitatAlles anzeigen
[ 3.775129] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 3.775409] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 3.776374] cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected], frontend(s): 1
[ 3.807549] cx2388x alsa driver version 0.0.9 loaded
[ 3.927580] cx88[0]: hauppauge eeprom: model=92001
[ 3.954762] input: cx88 IR (Hauppauge Nova-S-Plus as /devices/pci0000:00/0000:00:08.0/0000:01:08.0/rc/rc0/input5
[ 3.954835] rc0: cx88 IR (Hauppauge Nova-S-Plus as /devices/pci0000:00/0000:00:08.0/0000:01:08.0/rc/rc0
[ 3.959591] cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 16, latency: 32, mmio: 0xfa000000
[ 3.960301] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input6
[ 3.962133] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 3.964072] wm8775 1-001b: chip found @ 0x36 (cx88[0])
[ 3.977154] cx88[0]/0: registered device video0 [v4l2]
[ 3.977181] cx88[0]/0: registered device vbi0
[ 3.977210] cx88[0]/2: cx2388x 8802 Driver Manager
[ 3.977315] cx88[0]/2: found at 0000:01:08.2, rev: 5, irq: 16, latency: 32, mmio: 0xf8000000
[ 3.981443] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 3.981447] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 3.981451] cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
[ 3.981453] cx88[0]/2: cx2388x based DVB/ATSC card
[ 3.981455] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 3.985692] DVB: registering new adapter (cx88[0])
[ 3.985698] cx88-mpeg driver manager 0000:01:08.2: DVB: registering adapter 0 frontend 0 (Conexant CX24123/CX24109)...
[ 4.030954] cx88[0]/1: CX88x/0: ALSA support for cx2388x boardsunter /lib/firmware findet sich file:///lib/firmware/dvb-fe-cx24116-1.26.90.0.fw
diesen hatte ich verlinkt oder kopiert auf file:///lib/firmware/dvb-fe-cx24116.fw ohne jede Änderungwenn ich Kaffeine in der Konsole starte erhalte ich folgenden Ausdruck
ZitatAlles anzeigenvo_vdpau: vdpau API version : 1
vo_vdpau: vdpau implementation description : NVIDIA VDPAU Driver Shared Library 340.32 Tue Aug 5 20:35:32 PDT 2014
vo_vdpau: maximum video surface size for chroma type 4:2:2 is 4096x4096
vo_vdpau: maximum video surface size for chroma type 4:2:0 is 4096x4096
vo_vdpau: maximum output surface size is 16384x16384
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
vo_vdpau: hold a maximum of 10 video output surfaces for reuse
vo_vdpau: using 3 output surfaces of size 1680x1050 for display queue
QSystemTrayIcon::setVisible: No Icon setwenn ich in Kaffein den Sendersuchlauf starte erscheint folgende Fehlermeldung:
Zitatkaffeine(4276) DvbDevice::frontendEvent: tuning failed
Ich bin für jede Hilfe dankbar.