Servus,
mein neues Wacom intuos pen&touch M (CTH 680 funktioniert nach gut
zureden mit Win 7 und XP aber leider nicht um 12 Würste auf meinem
OpenSuse 12.3 Rechner (weder Gnome noch KDE)
HAbe die gesamte SourceForge Prozedur mit xf86-input-wacom-0.23.0, xf86-input-wacom-0.22.1, etc. probiert.
hwinfo sagt:
Code
63: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: 0UTv.xEnQGz298M0
Parent ID: MtLc.d7FDLX76qXB
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.0
SysFS BusID: 1-6.3:1.0
Hardware Class: unknown
Model: "Wacom Intuos PTM"
Hotplug: USB
Vendor: usb 0x056a "Wacom Co., Ltd"
Device: usb 0x0303 "Intuos PTM"
Revision: "1.00"
Speed: 12 Mbps
Module Alias: "usb:v056Ap0303d0100dc00dsc00dp00ic03isc00ip00in00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #68 (Hub)
65: USB 00.2: 10503 USB Mouse
[Created at usb.122]
Unique ID: wqz1.7omgZXOYnqA
Parent ID: MtLc.d7FDLX76qXB
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.2
SysFS BusID: 1-6.3:1.2
Hardware Class: mouse
Model: "Wacom Intuos PTM"
Hotplug: USB
Vendor: usb 0x056a "Wacom Co., Ltd"
Device: usb 0x0303 "Intuos PTM"
Revision: "1.00"
Compatible to: int 0x0200 0x0001 "Generic USB Mouse"
Speed: 12 Mbps
Module Alias: "usb:v056Ap0303d0100dc00dsc00dp00ic03isc01ip02in02"
Driver Info #0:
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #68 (Hub)Sämtliche Frontends und Kommandozeilen erkennen jedoch kein Tablett
Die Grafikkarte sieht so aus:
Code
46: PCI 700.0: 0300 VGA compatible controller (VGA)
[Created at pci.319]
Unique ID: aK5u.v7lVb+Df2U0
Parent ID: 8otl.BMiosGw4HD4
SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:07:00.0
SysFS BusID: 0000:07:00.0
Hardware Class: graphics card
Model: "nVidia Quadro FX 3500"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x029d "Quadro FX 3500"
SubVendor: pci 0x10de "nVidia Corporation"
SubDevice: pci 0x032b
Revision: 0xa1
Driver: "nvidia"
Driver Modules: "nvidia"
Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable)
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
Memory Range: 0xfb000000-0xfbffffff (rw,non-prefetchable)
I/O Ports: 0xdc80-0xdcff (rw)
Memory Range: 0xfce00000-0xfce1ffff (ro,non-prefetchable,disabled)
IRQ: 16 (39012 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v000010DEd0000029Dsv000010DEsd0000032Bbc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: nv
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)Der X Server ist:
Code
X.Org X Server 1.13.2
Release Date: 2013-01-24
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-vue7 3.7.10-1.24-desktop #1 SMP PREEMPT Wed Oct 2 11:15:18 UTC 2013 (375b8b4) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.24-desktop
root=UUID=15b71cc1-88a3-427b-abcf-03c5d3e89922
resume=/dev/disk/by-id/scsi-1ATA_ST3160023AS_3JS426XN-part2
splash=silent quiet showopts
Build Date: 19 December 2013Ratlos wende ich mich an Euch, wer hat kann helfen?
Bitte Konsolenausgaben in Code-Tags posten.