[Gelöst]DVB-T USB-Stick

tomm.fa · 27. August 2010

Stick abziehen,

Code

tail -f -n 50 /var/log/messages

als Root/su aufrufen, Stick anstecken und Ausgabe hier zeigen. Auch die Ausgabe von:

Code

lsmod

bei eingestecktem Stick.

guenni1948 · 27. August 2010

Hallo tomm.fa

Ich habe mein Bestes versucht.

Code

guenni@linux-yfw6:~/Desktop> tail -f -n 50 /var/log/messages
tail: „/var/log/messages“ kann nicht zum Lesen geöffnet werden: Keine Berechtigung
tail: Keine Dateien mehr übrig
guenni@linux-yfw6:~/Desktop> su
Passwort: 
linux-yfw6:/home/guenni/Desktop # lsmod
Module              	Size  Used by
ip6t_LOG            	5182  6 
xt_tcpudp           	2107  2 
xt_pkttype           	912  3 
xt_physdev          	1571  2 
ipt_LOG             	5119  6 
xt_limit            	1673  12 
rfcomm             	68951  4 
sco                	16615  2 
bridge             	71014  1 
stp                 	1719  1 bridge
llc                 	4967  2 bridge,stp
bnep               	14600  2 
l2cap              	53274  16 rfcomm,bnep
snd_pcm_oss        	47311  0 
snd_mixer_oss      	16449  1 snd_pcm_oss
snd_seq            	57073  0 
snd_seq_device      	6534  1 snd_seq
edd                 	8720  0 
af_packet          	19192  0 
ip6t_REJECT         	4311  3 
nf_conntrack_ipv6  	18193  4 
ip6table_raw        	1187  1 
xt_NOTRACK           	816  4 
ipt_REJECT          	2152  3 
xt_state            	1162  8 
iptable_raw         	1246  1 
iptable_filter      	1418  1 
ip6table_mangle     	1588  0 
nf_conntrack_netbios_ns 	1318  0 
nf_conntrack_ipv4   	8691  4 
nf_conntrack       	73886  5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4      	1201  1 nf_conntrack_ipv4
ip_tables          	12172  2 iptable_raw,iptable_filter
ip6table_filter     	1359  1 
ip6_tables         	13476  4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables           	16414  17 ip6t_LOG,xt_tcpudp,xt_pkttype,xt_physdev,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables
cpufreq_conservative	10064  0 
cpufreq_userspace   	2583  0 
cpufreq_powersave    	914  0 
acpi_cpufreq        	7407  0 
speedstep_lib       	4985  0 
mperf               	1255  1 acpi_cpufreq
fuse               	65514  7 
loop               	14417  0 
dm_mod             	72676  0 
tda18271           	55426  0 
af9013             	21586  0 
snd_hda_codec_realtek   235364  1 
snd_hda_intel      	24598  2 
snd_hda_codec      	98144  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep           	5990  1 snd_hda_codec
ppdev               	8412  0 
btusb              	15571  2 
dvb_usb_af9015     	25633  0 
uvcvideo           	60651  0 
snd_pcm            	86832  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer          	21318  2 snd_seq,snd_pcm
usbhid             	44717  0 
hid                	68594  1 usbhid
iTCO_wdt            	9926  0 
iTCO_vendor_support 	2570  1 iTCO_wdt
sr_mod             	14351  0 
cdrom              	37760  1 sr_mod
dvb_usb            	16230  1 dvb_usb_af9015
sg                 	27412  0 
usb_storage        	42555  0 
parport_pc         	32995  0 
dvb_core           	93049  1 dvb_usb
parport            	33558  2 ppdev,parport_pc
bluetooth          	95439  9 rfcomm,sco,bnep,l2cap,btusb
rfkill             	17106  2 bluetooth
usblp              	11499  0 
videodev           	39358  1 uvcvideo
v4l1_compat        	14629  2 uvcvideo,videodev
serio_raw           	4330  0 
snd                	64702  14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore           	7013  1 snd
pcspkr              	1614  0 
r8169              	38431  0 
i2c_i801            	9949  0 
snd_page_alloc      	7817  2 snd_hda_intel,snd_pcm
ext4              	360485  2 
jbd2               	78872  1 ext4
crc16               	1403  2 l2cap,ext4
uhci_hcd           	25788  0 
nouveau           	499443  2 
ttm                	55288  1 nouveau
ehci_hcd           	51733  0 
drm_kms_helper     	29179  1 nouveau
rtc_cmos           	10902  0 
drm               	176922  4 nouveau,ttm,drm_kms_helper
rtc_core           	17621  1 rtc_cmos
rtc_lib             	2441  1 rtc_core
i2c_algo_bit        	5572  1 nouveau
intel_agp          	27571  0 
i2c_core           	26632  10 tda18271,af9013,dvb_usb_af9015,dvb_usb,videodev,i2c_i801,nouveau,drm_kms_helper,drm,i2c_algo_bit
button              	5417  1 nouveau
sd_mod             	36723  6 
usbcore           	192259  10 btusb,dvb_usb_af9015,uvcvideo,usbhid,dvb_usb,usb_storage,usblp,uhci_hcd,ehci_hcd
fan                 	3539  0 
processor          	40311  1 acpi_cpufreq
ata_generic         	2711  0 
ata_piix           	19945  5 
ahci               	36734  0 
libata            	185684  3 ata_generic,ata_piix,ahci
scsi_mod          	159241  5 sr_mod,sg,usb_storage,sd_mod,libata
thermal            	17293  0 
thermal_sys        	14735  3 fan,processor,thermal
hwmon               	2060  1 thermal_sys

Alles anzeigen

Gruß Günni

tomm.fa · 27. August 2010

su hättest du vor dem ersten Befehl ausführen müssen. Ansonsten geht aber auch dmesg (dort nur was mit afatech, firmware, USB zu tun hat).

Edit:
Ganz vergessen, auch de Ausgabe von:

Code

ls /lib/firmware/ | grep dvb

bitte.

guenni1948 · 28. August 2010

@ tomm.fa

Ich hoffe, ich habe Dich richtig verstanden.
Günni

Code

guenni@linux-yfw6:~/Desktop> su
Passwort: 
linux-yfw6:/home/guenni/Desktop # af9013         	21586  0 
If 'af9013' is not a typo you can use command-not-found to lookup the package that contains it, like this:
	cnf af9013
linux-yfw6:/home/guenni/Desktop # dvb_usb_af9015 	25633  0
If 'dvb_usb_af9015' is not a typo you can use command-not-found to lookup the package that contains it, like this:
	cnf dvb_usb_af9015
linux-yfw6:/home/guenni/Desktop # dvb_usb        	16230  1 dvb_usb_af9015
If 'dvb_usb' is not a typo you can use command-not-found to lookup the package that contains it, like this:
	cnf dvb_usb
linux-yfw6:/home/guenni/Desktop # dvb_core       	93049  1 dvb_usb
If 'dvb_core' is not a typo you can use command-not-found to lookup the package that contains it, like this:
	cnf dvb_core
linux-yfw6:/home/guenni/Desktop # i2c_core       	26632  10 tda18271,af9013,dvb_usb_af9015,dvb_usb,videodev,i2c_i801,nouveau,dr
If 'i2c_core' is not a typo you can use command-not-found to lookup the package that contains it, like this:
	cnf i2c_core
linux-yfw6:/home/guenni/Desktop # usbcore       	192259  10 btusb,dvb_usb_af9015,uvcvideo,usbhid,dvb_usb,usb_storage,usblp,uhc
If 'usbcore' is not a typo you can use command-not-found to lookup the package that contains it, like this:
	cnf usbcore
linux-yfw6:/home/guenni/Desktop #

Alles anzeigen

Code

linux-yfw6:/home/guenni/Desktop # ls /lib/firmware/ | grep dvb
dvb-ttpci-01.fw
dvb-ttpci-01.fw-2622
linux-yfw6:/home/guenni/Desktop #

tomm.fa · 28. August 2010

Zitat von guenni1948

@ tomm.fa

Ich hoffe, ich habe Dich richtig verstanden.

Teilweise. Das erste war falsch. Stick abziehen →

Code

su -c 'tail -f -n 50 /var/log/messages'

eingeben → Stick einstecken → Ausgabe zeigen.

So wie es aussieht, fehlt die passende Firmware.

guenni1948 · 28. August 2010

@ tomm.fa

Code

guenni@linux-yfw6:~/Desktop> su -c 'tail -f -n 50 /var/log/messages'
Passwort: 
Aug 28 00:19:49 linux-yfw6 su: gkr-pam: couldn't unlock the login keyring.
Aug 28 00:19:49 linux-yfw6 su: (to root) guenni on /dev/pts/0
Aug 28 00:21:29 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 127660ms.
Aug 28 00:23:37 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 122160ms.
Aug 28 00:25:39 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 112500ms.
Aug 28 00:27:31 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 110170ms.
Aug 28 00:29:22 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 118910ms.
Aug 28 00:31:21 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 120690ms.
Aug 28 00:33:21 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 119970ms.
Aug 28 00:35:21 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 110050ms.
Aug 28 00:37:08 linux-yfw6 dhcpcd[2936]: eth0: lost lease, attemping to rebind
Aug 28 00:37:08 linux-yfw6 dhcpcd[2936]: eth0: leased 192.168.1.5 for 3600 seconds
Aug 28 00:37:08 linux-yfw6 dhcpcd[2936]: eth0: no renewal time supplied, assuming 1800 seconds
Aug 28 00:37:08 linux-yfw6 dhcpcd[2936]: eth0: no rebind time supplied, assuming 3150 seconds
Aug 28 00:37:08 linux-yfw6 dhcpcd[2936]: eth0: adding IP address 192.168.1.5/24
Aug 28 00:37:08 linux-yfw6 dhcpcd[2936]: eth0: adding default route via 192.168.1.254 metric 0
Aug 28 00:37:08 linux-yfw6 dhcpcd[2936]: eth0: setting hostname to `linux-yfw6'
Aug 28 00:37:08 linux-yfw6 ifup: 	eth0  	device: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Aug 28 00:37:08 linux-yfw6 SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Aug 28 00:37:08 linux-yfw6 SuSEfirewall2: using default zone 'ext' for interface pan0
Aug 28 00:37:09 linux-yfw6 SuSEfirewall2: batch committing...
Aug 28 00:37:09 linux-yfw6 SuSEfirewall2: Firewall rules successfully set
Aug 28 00:37:11 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 126710ms.
Aug 28 00:39:18 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 119680ms.
Aug 28 00:41:18 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 123110ms.
Aug 28 00:43:21 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 109390ms.
Aug 28 00:45:11 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 109510ms.
Aug 28 00:47:00 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 131020ms.
Aug 28 00:47:18 linux-yfw6 kernel: [16387.740806] usb 1-3.4.2: USB disconnect, address 19
Aug 28 00:47:55 linux-yfw6 su: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-RYCqqV/control
Aug 28 00:47:55 linux-yfw6 su: gkr-pam: couldn't unlock the login keyring.
Aug 28 00:47:55 linux-yfw6 su: (to root) guenni on /dev/pts/1
Aug 28 00:49:11 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 114130ms.
Aug 28 00:51:06 linux-yfw6 dhclient: XMT: Solicit on eth0, interval 108640ms.
Aug 28 00:52:15 linux-yfw6 kernel: [16684.168897] usb 1-3.4.2: new high speed USB device using ehci_hcd and address 20
Aug 28 00:52:15 linux-yfw6 kernel: [16684.266510] usb 1-3.4.2: New USB device found, idVendor=15a4, idProduct=9016
Aug 28 00:52:15 linux-yfw6 kernel: [16684.266515] usb 1-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 28 00:52:15 linux-yfw6 kernel: [16684.266520] usb 1-3.4.2: Product: DVB-T 2
Aug 28 00:52:15 linux-yfw6 kernel: [16684.266523] usb 1-3.4.2: Manufacturer: Afatech
Aug 28 00:52:15 linux-yfw6 kernel: [16684.266526] usb 1-3.4.2: SerialNumber: 010101010600001
Aug 28 00:52:15 linux-yfw6 kernel: [16684.658970] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
Aug 28 00:52:15 linux-yfw6 kernel: [16684.658979] usb 1-3.4.2: firmware: requesting dvb-usb-af9015.fw
Aug 28 00:52:15 linux-yfw6 kernel: [16684.661279] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
Aug 28 00:52:15 linux-yfw6 kernel: [16684.661291] dvb_usb_af9015: probe of 1-3.4.2:1.0 failed with error -2
Aug 28 00:52:15 linux-yfw6 kernel: [16684.664925] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8
Aug 28 00:52:15 linux-yfw6 kernel: [16684.665368] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.1/input/input15
Aug 28 00:52:15 linux-yfw6 kernel: [16684.665512] generic-usb 0003:15A4:9016.000B: input,hidraw1: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-3.4.2/input1
Aug 28 00:52:34 linux-yfw6 su: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-RYCqqV/control
Aug 28 00:52:34 linux-yfw6 su: gkr-pam: couldn't unlock the login keyring.
Aug 28 00:52:34 linux-yfw6 su: (to root) guenni on /dev/pts/0

Alles anzeigen

tomm.fa · 28. August 2010

Zitat

Aug 28 00:52:15 linux-yfw6 kernel: [16684.658970] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
Aug 28 00:52:15 linux-yfw6 kernel: [16684.658979] usb 1-3.4.2: firmware: requesting dvb-usb-af9015.fw
Aug 28 00:52:15 linux-yfw6 kernel: [16684.661279] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
Aug 28 00:52:15 linux-yfw6 kernel: [16684.661291] dvb_usb_af9015: probe of 1-3.4.2:1.0 failed with error -2

Dieses ist die Bestätigung und de Hinweis was gebraucht wird. Jetzt als normaler Benutzer:

Code

wget http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw

und kopierst (als Root/su) dvb-usb-af9015.fw nach /lib/firmware. Dieses kannst du mit cp oder mv (siehe dazu man cp, oder man mv) machen. Du kannst auch Alt + F2 drücken → gnomesu nautilus eingeben → und die Firmware per drag & drop nach /lib/firmware verschieben, danach den Stick ab- und wieder anstecken und er sollte dann fuktionieren.

guenni1948 · 28. August 2010

@ tomm.fa

1

wget http://www.otit.fi/~crope/v4l-…_files/4.95.0/dvb-usb-af9

zeigt

Code

guenni@linux-yfw6:~/Desktop> wget http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_f
--2010-08-28 01:36:39--  http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_f
Auflösen des Hostnamen »www.otit.fi«.... 130.231.60.120, 2001:708:520:80:209:3dff:fe13:9ed7
Verbindungsaufbau zu www.otit.fi|130.231.60.120|:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 404 Not Found
2010-08-28 01:36:39 FEHLER 404: Not Found.

Sauerland · 28. August 2010

Du hast zomm.fa`s wget Kommando nicht richtig kopiert, probier es mal nur mit kopieren statt Linkadresse kopieren.
Deswegen die Fehlermeldung.
Das Komanndo funktioniert und die Firmware liegt dann in Deinem home Ordner.

tomm.fa · 28. August 2010

Jo, dass war nicht der komplette Text. Du kannst aber auch mit deinem Webbrowser diese URL (http://www.otit.fi/~crope/v4l-…er/firmware_files/4.95.0/) öffnen und die darin enthaltene Firmware herunterladen.

[Gelöst]DVB-T USB-Stick

Tumbleweed-Update bricht ab

GNOME OS Preview: Ein Schritt in Richtung Alltagsbetrieb

Ubuntu 26.10 „Stonking Stingray“ ist erschienen

KDE Plasma 6.8 verabschiedet sich von X11

VBox - gemeinsame Zwischenablage

pit1958ffm

Wanderratte

k.113

aitexturegenerator

Giorgio68

Teilen