Hi,
Ich habe ein Problem mit dem derzeitigen Kernel 2.6.37.6, immer wenn jemand eine dhcp anfrage zu stellen stuerzt die NIC ab, wie kann ich den kernel 2.6.37.5, bzw eine version zurueck, wieder installieren? ueber yast hab ich ueber die sache nach "kernel" nichts gefunden! braeuchte schnelle antwort!
Danke!
Thorus
Falls es hilft, dass hier ist die Fehlermeldung:
May 9 08:53:26 server kernel: [ 292.704044] ------------[ cut here ]------------
May 9 08:53:26 server kernel: [ 292.704054] WARNING: at /usr/src/packages/BUILD/kernel-desktop-2.6.37.6/linux-2.6.37/net/sched/sch_generic.c:258 dev_watchdog+0x233/0x240()
May 9 08:53:26 server kernel: [ 292.704056] Hardware name: System Product Name
May 9 08:53:26 server kernel: [ 292.704058] NETDEV WATCHDOG: eth1 (e1000): transmit queue 0 timed out
May 9 08:53:26 server kernel: [ 292.704060] Modules linked in: loop ip6t_LOG xt_TCPMSS ipt_MASQUERADE iptable_nat nf_nat ipt_LOG xt_tcpudp xt_limit xt_pkttype af_packet edd ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables cpufreq_conservative snd_pcm_oss cpufreq_userspace cpufreq_powersave snd_mixer_oss acpi_cpufreq mperf snd_seq snd_seq_device dm_mod snd_hda_codec_hdmi ata_generic snd_hda_codec_realtek sg sr_mod r8169 pata_marvell snd_hda_intel cdrom ppdev e1000 iTCO_wdt iTCO_vendor_support i2c_i801 pcspkr shpchp parport_pc pci_hotplug parport snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc asus_atk0110 serio_raw raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid10 raid1 raid0 i915 drm_kms_helper drm i2c_algo_bit button video fan thermal processor therma
May 9 08:53:26 server kernel: l_sys
May 9 08:53:26 server kernel: [ 292.704124] Pid: 0, comm: kworker/0:0 Not tainted 2.6.37.6-0.5-desktop #1
May 9 08:53:26 server kernel: [ 292.704126] Call Trace:
May 9 08:53:26 server kernel: [ 292.704138] [<ffffffff810059b9>] dump_trace+0x79/0x340
May 9 08:53:26 server kernel: [ 292.704143] [<ffffffff81521752>] dump_stack+0x69/0x6f
May 9 08:53:26 server kernel: [ 292.704149] [<ffffffff8105815b>] warn_slowpath_common+0x7b/0xc0
May 9 08:53:26 server kernel: [ 292.704154] [<ffffffff81058255>] warn_slowpath_fmt+0x45/0x50
May 9 08:53:26 server kernel: [ 292.704158] [<ffffffff81442463>] dev_watchdog+0x233/0x240
May 9 08:53:26 server kernel: [ 292.704164] [<ffffffff8106819e>] call_timer_fn+0x3e/0x190
May 9 08:53:26 server kernel: [ 292.704169] [<ffffffff81068534>] run_timer_softirq+0x144/0x2a0
May 9 08:53:26 server kernel: [ 292.704173] [<ffffffff8105f98a>] __do_softirq+0xda/0x2a0
May 9 08:53:26 server kernel: [ 292.704178] [<ffffffff81003e6c>] call_softirq+0x1c/0x30
May 9 08:53:26 server kernel: [ 292.704182] [<ffffffff8100590d>] do_softirq+0x4d/0x80
May 9 08:53:26 server kernel: [ 292.704186] [<ffffffff8105fc45>] irq_exit+0x95/0xa0
May 9 08:53:26 server kernel: [ 292.704191] [<ffffffff810204fa>] smp_apic_timer_interrupt+0x6a/0xa0
May 9 08:53:26 server kernel: [ 292.704195] [<ffffffff81003933>] apic_timer_interrupt+0x13/0x20
May 9 08:53:26 server kernel: [ 292.704201] [<ffffffff8100bb17>] mwait_idle+0x97/0x290
May 9 08:53:26 server kernel: [ 292.704206] [<ffffffff8100125c>] cpu_idle+0x4c/0xa0
May 9 08:53:26 server kernel: [ 292.704209] ---[ end trace bd81b6d65023f91b ]---
May 9 08:53:29 server kernel: [ 295.419835] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
und danach geht eth1 nicht mehr, und muss rebooten....
Ok habs geloest in Yast2, (die GUI) , ist wenn man das paket angewaehlt hat ein Punkt Version mit pfeil, da drueckt man drauf dann kann man alte versionen installieren
