Hallo zusammen,
bin Neuling was Linux betrifft und habe eine Frage.
Ich gehe per WLAN ins Internet, soweit funktioniert auch alles.
Wenn ich nun längere Zeit auf einer Seite verweile, bzw. kein Datentransfer stattfindet und ich dann eine neue Seite anklicke, dann dauert das verhältnissmässig lange, bis die Verbindung wieder da ist. Auf dem (Firefox)Tab wo normalerweise der Name der Seite steht, steht Verbunden.... und dann dauert es bestimmt 5-10 Sekunden bis Firefox anfängt, die Seite aufzubauen.
Es scheint so, als ob das WLAN nach einer gewissen Zeit in so eine Art standby geht und dann erst "mühsam wieder hochfährt". Woran kann das liegen ?
Anbei noch die Posts von hwinfo usw. wie das in anderen Threads oft der Fall ist, falls dass was nützt.
Danke schon mal für eure Mühen.
uname -a
Linux erde.site 3.4.11-2.16-desktop #1 SMP PREEMPT Wed Sep 26 17:05:00 UTC 2012 (259fc87) i686 i686 i386 GNU/Linux
hwinfo --wlan
14: PCI 103.0: 0282 WLAN controller
[Created at pci.319]
Unique ID: JNkJ.iNwz5QVJQz3
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:03.0
SysFS BusID: 0000:01:03.0
Hardware Class: network
Model: "Intel PRO/Wireless 2200BG [Calexico2] Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x4220 "PRO/Wireless 2200BG [Calexico2] Network Connection"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x2702
Revision: 0x05
Driver: "ipw2200"
Driver Modules: "ipw2200"
Device File: eth1
Features: WLAN
Memory Range: 0xffcfe000-0xffcfefff (rw,non-prefetchable)
IRQ: 19 (no events)
HW Address: 00:13:ce:6c:83:73
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN bitrates: 1 2 5.5 11 6 9 12 18 24 36 48 54
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Requires: ipw-firmware
Module Alias: "pci:v00008086d00004220sv00008086sd00002702bc02sc80i00"
Driver Info #0:
Driver Status: ipw2200 is active
Driver Activation Cmd: "modprobe ipw2200"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)
Alles anzeigen