Hallo nochmal,
nachdem ich jetzt gerade eben mit hilfe es geschaft habe mien UMTSmon zum laufen zu bekommen kommt jetzt natürlich das nächste Problem er stellt keine Verbindung her.
habe UMTSmon unter -v5 ausgeführt und pppstdout vom Programm gibt folgendes her:
Code
pppd options in effect:
debug debug debug debug # (from command line)
updetach # (from command line)
idle 7200 # (from command line)
dump # (from command line)
user ppp@A1plus.at # (from command line)
password ?????? # (from command line)
/dev/ttyUSB0 # (from command line)
460800 # (from command line)
lock # (from command line)
crtscts # (from command line)
modem # (from command line)
asyncmap 0 # (from command line)
silent # (from /etc/ppp/options)
novj # (from command line)
defaultroute # (from command line)
proxyarp # (from /etc/ppp/options)
usepeerdns # (from command line)
nobsdcomp # (from command line)
noipx # (from command line)
using channel 12
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
Terminating on signal 15
Connection terminated.
Receive serial link is not 8-bit clean:
Problem: all had bit 7 set to 0
Alles anzeigen
kann damit jemand was anfangen?
danke schon mal
Philipp