Beiträge von Tante Trudi

  • [gelöst] Fernsehen mit Suse

    Zitat von Trekkie00

    Mach mal so wie von User Sauerland in #8 vorgeschlagen

    Code
    wget http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw
sudo mv dvb-usb-af9015.fw /lib/firmware/

    asking libproxy about url 'http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw'
    libproxy suggest to use 'direct://'
    --2011-12-06 16:12:29-- http://www.otit.fi/~crope/v4l-…/4.95.0/dvb-usb-af9015.fw
    Auflösen des Hostnamen »http://www.otit.fi (http://www.otit.fi)«... 130.231.60.120, 2001:708:520:80:209:3dff:fe13:9ed7
    Verbindungsaufbau zu http://www.otit.fi (http://www.otit.fi)|130.231.60.120|:80... verbunden.
    HTTP-Anforderung gesendet, warte auf Antwort... 200 OK
    Länge: 15913 (16K) [text/plain]
    In »»dvb-usb-af9015.fw.1«« speichern.


    100%[=============================================================================================>] 15.913 84,0K/s in 0,2s


    2011-12-06 16:12:29 (84,0 KB/s) - »»dvb-usb-af9015.fw.1«« gespeichert [15913/15913]


    Zitat von Trekkie00

    wget http://www.otit.fi/~crope/v4l-…/4.95.0/dvb-usb-af9015.fw

  • [gelöst] Fernsehen mit Suse

    Zitat von Trekkie00

    Genau


    Geschafft.


    03: USB 00.0: 10a00 Hub
    [Created at usb.122]
    Unique ID: k4bc.9T1GDCLyFd9
    SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
    SysFS BusID: 1-0:1.0
    Hardware Class: hub
    Model: "Linux 3.1.0-1.2-desktop ehci_hcd EHCI Host Controller"
    Hotplug: USB
    Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop ehci_hcd"
    Device: usb 0x0002 "EHCI Host Controller"
    Revision: "3.01"
    Serial ID: "0000:00:1d.7"
    Driver: "hub"
    Driver Modules: "usbcore"
    Speed: 480 Mbps
    Module Alias: "usb:v1D6Bp0002d0301dc09dsc00dp00ic09isc00ip00"
    Config Status: cfg=no, avail=yes, need=no, active=unknown


    04: USB 00.0: 10a00 Hub
    [Created at usb.122]
    Unique ID: pBe4.v+N+B0xY+P6
    SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
    SysFS BusID: 2-0:1.0
    Hardware Class: hub
    Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
    Hotplug: USB
    Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
    Device: usb 0x0001 "UHCI Host Controller"
    Revision: "3.01"
    Serial ID: "0000:00:1d.0"
    Driver: "hub"
    Driver Modules: "usbcore"
    Speed: 12 Mbps
    Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
    Config Status: cfg=no, avail=yes, need=no, active=unknown


    05: USB 00.0: 10a00 Hub
    [Created at usb.122]
    Unique ID: uIhY.gkSaZmjGyhD
    SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
    SysFS BusID: 3-0:1.0
    Hardware Class: hub
    Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
    Hotplug: USB
    Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
    Device: usb 0x0001 "UHCI Host Controller"
    Revision: "3.01"
    Serial ID: "0000:00:1d.1"
    Driver: "hub"
    Driver Modules: "usbcore"
    Speed: 12 Mbps
    Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
    Config Status: cfg=no, avail=yes, need=no, active=unknown


    06: USB 00.0: 10a00 Hub
    [Created at usb.122]
    Unique ID: zPk0.RTX9xWW_uz4
    SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
    SysFS BusID: 4-0:1.0
    Hardware Class: hub
    Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
    Hotplug: USB
    Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
    Device: usb 0x0001 "UHCI Host Controller"
    Revision: "3.01"
    Serial ID: "0000:00:1d.2"
    Driver: "hub"
    Driver Modules: "usbcore"
    Speed: 12 Mbps
    Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
    Config Status: cfg=no, avail=yes, need=no, active=unknown


    07: USB 00.0: 10a00 Hub
    [Created at usb.122]
    Unique ID: 2XnU.CCckIHJirFC
    SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
    SysFS BusID: 5-0:1.0
    Hardware Class: hub
    Model: "Linux 3.1.0-1.2-desktop uhci_hcd UHCI Host Controller"
    Hotplug: USB
    Vendor: usb 0x1d6b "Linux 3.1.0-1.2-desktop uhci_hcd"
    Device: usb 0x0001 "UHCI Host Controller"
    Revision: "3.01"
    Serial ID: "0000:00:1d.3"
    Driver: "hub"
    Driver Modules: "usbcore"
    Speed: 12 Mbps
    Module Alias: "usb:v1D6Bp0001d0301dc09dsc00dp00ic09isc00ip00"
    Config Status: cfg=no, avail=yes, need=no, active=unknown


    08: USB 00.0: 11100 DVB Card
    [Created at usb.122]
    Unique ID: wkjR.__35TZAIo50
    Parent ID: k4bc.9T1GDCLyFd9
    SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0
    SysFS BusID: 1-5:1.0
    Hardware Class: dvb card
    Model: "Afatech DVB-T 2"
    Hotplug: USB
    Vendor: usb 0x15a4 "Afatech"
    Device: usb 0x9016 "DVB-T 2"
    Revision: "2.00"
    Serial ID: "010102170900200"
    Speed: 480 Mbps
    Module Alias: "usb:v15A4p9016d0200dc00dsc00dp00icFFisc00ip00"
    Driver Info #0:
    Driver Status: dvb-usb-af9015 is active
    Driver Activation Cmd: "modprobe dvb-usb-af9015"
    Driver Info #1:
    Driver Status: hdj_mod is active
    Driver Activation Cmd: "modprobe hdj_mod"
    Config Status: cfg=new, avail=yes, need=no, active=unknown
    Attached to: #3 (Hub)


    10: USB 00.0: 10800 Keyboard
    [Created at usb.122]
    Unique ID: KRJj.rGby2egOpM5
    Parent ID: uIhY.gkSaZmjGyhD
    SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0
    SysFS BusID: 3-1:1.0
    Hardware Class: keyboard
    Model: "Logitech USB Multimedia Keyboard"
    Hotplug: USB
    Vendor: usb 0x046d "Logitech, Inc."
    Device: usb 0xc312 "USB Multimedia Keyboard"
    Revision: "1.01"
    Driver: "usbhid"
    Driver Modules: "usbhid"
    Device File: /dev/input/event3
    Device Files: /dev/input/event3, /dev/input/by-id/usb-LITEON_Technology_USB_Multimedia_Keyboard-event-kbd, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-kbd
    Device Number: char 13:67
    Speed: 1.5 Mbps
    Module Alias: "usb:v046DpC312d0101dc00dsc00dp00ic03isc01ip01"
    Driver Info #0:
    XkbRules: xfree86
    XkbModel: pc104
    Config Status: cfg=yes, avail=yes, need=yes, active=unknown
    Attached to: #5 (Hub)


    11: USB 00.0: 10503 USB Mouse
    [Created at usb.122]
    Unique ID: mZxt.WHSgOLc42t9
    Parent ID: uIhY.gkSaZmjGyhD
    SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0
    SysFS BusID: 3-2:1.0
    Hardware Class: mouse
    Model: "Logitech USB Optical Mouse"
    Hotplug: USB
    Vendor: usb 0x046d "Logitech, Inc."
    Device: usb 0xc046 "USB Optical Mouse"
    Revision: "27.20"
    Compatible to: int 0x0210 0x0028
    Driver: "usbhid"
    Driver Modules: "usbhid"
    Device File: /dev/input/mice (/dev/input/mouse0)
    Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event4, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse, /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse
    Device Number: char 13:63 (char 13:32)
    Speed: 1.5 Mbps
    Module Alias: "usb:v046DpC046d2720dc00dsc00dp00ic03isc01ip02"
    Driver Info #0:
    Buttons: 8
    Wheels: 2
    XFree86 Protocol: explorerps/2
    GPM Protocol: exps2
    Config Status: cfg=yes, avail=yes, need=yes, active=unknown
    Attached to: #5 (Hub)

  • [gelöst] Fernsehen mit Suse

    Zitat von Trekkie00

    zypper se -s hwinfo

    S | Name | Typ | Version | Arch | Repository
    --+--------------+-------+------------+------+-----------------------
    i | hwinfo | Paket | 19.0-2.1.3 | i586 | openSUSE-12.1-Oss
    i | hwinfo | Paket | 19.0-2.1.3 | i586 | openSUSE-12.1-12.1-1.4
    | hwinfo-devel | Paket | 19.0-2.1.3 | i586 | openSUSE-12.1-Oss
    | hwinfo-devel | Paket | 19.0-2.1.3 | i586 | openSUSE-12.1-12.1-1.4

  • [gelöst] Fernsehen mit Suse



    Hallo retoure!


    Bisher hatte ich Me-Tv unter Ubuntu benutzt und das klappte ausgezeichnet. Bin daher etwas "verwöhnt" ;) und halte mich vorerst an die für mich vertrautere Anwendung xawtv. Beim Einrichten derselben im Yast war bei "Sender suchen" Ende der Vorstellung.


    Hersteller der TV-Karte (MSI DIGI VOX mini II) gefunden. Aber es folgte: NICHTS


    Aber ich bleibe dran und danke Dir sehr für Deine Hilfsbereitschaft.


    Bis dahin und Gute Nacht

  • [gelöst] Fernsehen mit Suse

    Zitat von Trekkie00

    lsusb



    So siehts aus:


    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 004: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
    Bus 003 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
    Bus 003 Device 003: ID 046d:c046 Logitech, Inc. RX1000 Laser Mouse

  • [gelöst] Fernsehen mit Suse

    Zitat von Trekkie00

    Einfach mal die Anwendung aus dem Terminal starten und eventuelle Fehlermeldungen hier posten.


    This is xawtv-3.102, running on Linux/i686 (3.1.0-1.2-desktop)
    xinerama 0: 1680x1050+0+0
    vid-open-auto: failed to open a capture device
    vid-open: could not find a suitable videodev
    no video grabber device available