Beiträge von DoctorNo

DoctorNo · 23. Oktober 2012

Also ich bin mit nicht sicher aber ich denke:

1.Problem
Sollte sich loesen lassen in dem du in Yast beim CA-Management die CA als ca.crt exportiers und diese auf den Client kopierst und im LDAP-Client unter den TLS einstellungen eintraegst.

2.Problem
Ich hoffe ich habe dass richtig verstanden, aber ansich kannst du einfach auf den Filterbutton klicken und dann siehst du auch die LDAP-User oder du stellst es halt so ein wie es dir gefaellt.

Ach und um die Frage zu beantworten ja das ganze Setup laeuft bei mit so unter 12.2

Vllt bist du ja auch schon selber auf die Loesung gekommen.

Da ich ja nicht so genau weiss wie dein Setup aussieht ob es eher ein Zuhause just4fun Projekt ist oder wirklich ein Produktivsystem mit hoher Verfuegbarkeit. Wollte ich trotzdem noch auf ein super Projekt verweisen falls der erste Fall zutrifft und du a) eine Fritzbox oder Speedport besitzt und b) der Server nicht 24h anbleibt um DNS und DHCP bereit zu stellen.

http://freetz.org/

Greetz der DoctorNo

DoctorNo · 17. Oktober 2012

Hi uhelp,

ich habe keinerlei Problem die Schritte zu verstehen es funktioniert mit diesen Anweisungen bei mir nur einfach nicht.

Was ich zur Zeit sagen kann ist dass das Script aufjedenfall mit ins Initram gepackt wird und auch beim booten ausgefuehrt wird. Dies weiss ich da ich nur einmal zum Test die Ausgabe umleitungen raus genommen habe. Muesste demnach alles gehen module laden, usb stick mounten, cat des Keys und wieder umounten. Das alles jedoch aendert nicht daran dass ich einen Key eingeben muss.

Ich finde in /var/log/boot.log keine Fehler
Es ist alles in der /etc/crypttab richtig eingetragen
Module sind in /etc/sysconfig/kernel eingetragen
Der key funktionniert zum manuellen einbinden Test durch boot von einer LiveCD

Ich weiss um ehrlich zu sein nicht wo das Problem liegt

Hat es bei dir in dieser Zusammensetzung geklappt ??

M.f.G.
DoctorNo

DoctorNo · 16. Oktober 2012

Hi Pixel,

für das Zertifikat ist es wichtig dass der DNS-Name oder der Hostname gleich dem Namen des Zertifikats ist.
Das hat zumindest bei mir funktioniert

Hier noch ein link der mir sehr geholfen hat. Man kann unten weiter zum erstem Beitrag gehen. Hier wird ein komplettes LDAP-Setup für 12.1 beschrieben.

LDAP-Setup

M.f.G.

DoctorNo

DoctorNo · 16. Oktober 2012

Hi Leute,

ich hoffe mir kann jemand erklären wie genau ich vorgehen muss um meine bei der Installation verschlüsselte Partition mit einem Key auf einem USB-Stick einzubinden.

Ich habe leider keine Anleitung und Hilfe gefunden die für mein Opensuse 12.2 funktioniert.
Auf dem Screenshot habe ich mal meinen Festplatten-Aufbau dargestellt.
Ich habe also eine nicht verschlüsselte boot Partition sda1 eine verschlüsselten LVM Gruppe sda2 auf welcher dann die restlichen Partitionen sind.

Hier noch ein Paar Links welche mit welchen ich versucht habe das Problem zu lösen leider ohne Erfolg.

http://www.marix.org/content/u…attenverschl%C3%BCsselung
http://www.andreas-janssen.de/cryptodisk.html
http://www.howtoforge.com/auto…ted-drives-with-a-keyfile
http://www.stefanux.de/wiki/do…attenverschl%C3%BCsselung

Vielen Dank im Voraus

DoctorNo · 10. September 2012

Das ist ansich soweit ich das verstehe alles gut allerdings liefert:

[fieldset]sudo dmesg | grep cx[/fieldset]

Code

[   12.395083] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[   12.398010] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[   12.402649] cx2388x alsa driver version 0.0.9 loaded
[   12.452581] cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
[   12.452583] cx88[0]: TV tuner type 63, Radio tuner type -1
[   12.566358] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
[   12.631939] cx88[0]: hauppauge eeprom: model=69009
[   12.667929] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:14.4/0000:04:05.2/rc/rc0/input14
[   12.667979] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:14.4/0000:04:05.2/rc/rc0
cx88[0]/2: cx2388x 8802 Driver Manager
cx88[0]/2: found at 0000:04:05.2, rev: 5, irq: 20, latency: 64, mmio: 0xfb000000
cx88[0]/0: found at 0000:04:05.0, rev: 5, irq: 20, latency: 64, mmio: 0xfd000000
wm8775 5-001b: chip found @ 0x36 (cx88[0])
cx88/2: cx2388x dvb driver version 0.0.9 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 2 frontend(s)
input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input15
rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
DVB: registering new adapter (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1000] dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
.
.
.
cx88[0]: irq aud [0x1000] dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1000] dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
.
.
cx24116_firmware_ondemand: Writing firmware to device failed
cx24116_firmware_ondemand: Firmware upload failed
cx24116_cmd_execute(): Unable initialise the firmware
cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_cmd_execute() Firmware not responding
.
.
.
cx24116_cmd_execute() Firmware not responding
cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
cx24116_firmware_ondemand: Waiting for firmware upload(2)...
cx24116_cmd_execute() Firmware not responding
cx24116_firmware_ondemand: Writing firmware to device failed
cx24116_firmware_ondemand: Firmware upload failed
cx24116_cmd_execute(): Unable initialise the firmware

Alles anzeigen

Aus dieser Fehlermeldung schliesse ich das entweder der Treiber fuer die Karte nicht richtig geladen wird oder alternativ ein falscher/inkompatibler Treiber geladen wird.

Ich habe mir bereits folgende Dinge dazu durchgelesen und ausprobiert.
http://www.linuxtv.org/wiki/in…/Hauppauge_WinTV-HVR-4000
http://lists.opensuse.org/opensuse-de/2009-12/msg00233.html
http://www.kernellabs.com/blog/?p=1568
http://forum.ubuntuusers.de/to…device-busy/#post-2301313
http://www.hauppauge.de/site/support/support_linux.html
aber leider hat nichts davon wirklich geholfen.

Das Problem ansich aeussert sich so dass der Sendersuchlauf fehlschlaegt.
Ich habe es sowohl in Kaffeine Version 1.2.2 wie auch in MythTV 0.25 probiert beide erkennen die Karte jedoch funktioniert der Suchlauf nicht.

p.s. falls jemand fragt ja das Kabel steckt in der Dose wie auch in der Karte und ja ich weiss wie man Astra 19.2 einstellt

Vielen Dank schonmal im Voraus es waere echt super wenn mir jemand helfen koennte da ich sonst die Karte wieder verkaufen werde

M.f.G.
DoctorNo

DoctorNo · 10. September 2012

Code

01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4290] [1002:9714] (prog-if 00 [VGA controller])
    	Subsystem: ASUSTeK Computer Inc. Device [1043:8454]
    	Flags: bus master, fast devsel, latency 0, IRQ 18
    	Memory at d0000000 (32-bit, prefetchable) [size=256M]
    	I/O ports at b000 [size=256]
    	Memory at f9df0000 (32-bit, non-prefetchable) [size=64K]
    	Memory at f9c00000 (32-bit, non-prefetchable) [size=1M]
    	Expansion ROM at <unassigned> [disabled]
    	Capabilities: [50] Power Management version 3
    	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    	Kernel driver in use: radeon


01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
    	Subsystem: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
    	Flags: bus master, fast devsel, latency 0, IRQ 19
    	Memory at f9de8000 (32-bit, non-prefetchable) [size=16K]
    	Capabilities: [50] Power Management version 3
    	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    	Kernel driver in use: snd_hda_intel


02:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
    	Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8413]
    	Flags: bus master, fast devsel, latency 0, IRQ 17
    	Memory at f9efe000 (64-bit, non-prefetchable) [size=8K]
    	Capabilities: [50] Power Management version 3
    	Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
    	Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
    	Capabilities: [a0] Express Endpoint, MSI 00
    	Capabilities: [100] Advanced Error Reporting
    	Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
    	Capabilities: [150] Latency Tolerance Reporting
    	Kernel driver in use: xhci_hcd


03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 10) (prog-if 01 [AHCI 1.0])
    	Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
    	Flags: bus master, fast devsel, latency 0, IRQ 18
    	Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]
    	Capabilities: [8c] Power Management version 3
    	Capabilities: [50] Express Legacy Endpoint, MSI 00
    	Kernel driver in use: ahci


03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:0368] (rev 10) (prog-if 85 [Master SecO PriO])
    	Subsystem: JMicron Technology Corp. Device [197b:1368]
    	Flags: bus master, fast devsel, latency 0, IRQ 19
    	I/O ports at cc00 [size=8]
    	I/O ports at c880 [size=4]
    	I/O ports at c800 [size=8]
    	I/O ports at c480 [size=4]
    	I/O ports at c400 [size=16]
    	Capabilities: [8c] Power Management version 3
    	Capabilities: [50] Express Legacy Endpoint, MSI 00
    	Kernel driver in use: pata_jmicron


04:05.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
    	Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD [0070:6902]
    	Flags: bus master, medium devsel, latency 64, IRQ 20
    	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    	Capabilities: [44] Vital Product Data
    	Capabilities: [4c] Power Management version 2
    	Kernel driver in use: cx8800


04:05.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
    	Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD [0070:6902]
    	Flags: bus master, medium devsel, latency 64, IRQ 20
    	Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
    	Capabilities: [4c] Power Management version 2
    	Kernel driver in use: cx88_audio


04:05.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
    	Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD [0070:6902]
    	Flags: bus master, medium devsel, latency 64, IRQ 20
    	Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
    	Capabilities: [4c] Power Management version 2
    	Kernel driver in use: cx88-mpeg driver manager


04:05.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
    	Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD [0070:6902]
    	Flags: bus master, medium devsel, latency 64, IRQ 11
    	Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
    	Capabilities: [4c] Power Management version 2


04:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
    	Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
    	Flags: bus master, medium devsel, latency 64, IRQ 22
    	Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K]
    	I/O ports at dc00 [size=128]
    	Capabilities: [50] Power Management version 2
    	Kernel driver in use: firewire_ohci


05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
    	Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432]
    	Flags: bus master, fast devsel, latency 0, IRQ 51
    	I/O ports at e800 [size=256]
    	Memory at f8fff000 (64-bit, prefetchable) [size=4K]
    	Memory at f8ff8000 (64-bit, prefetchable) [size=16K]
    	Capabilities: [40] Power Management version 3
    	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
    	Capabilities: [70] Express Endpoint, MSI 01
    	Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
    	Capabilities: [d0] Vital Product Data
    	Capabilities: [100] Advanced Error Reporting
    	Capabilities: [140] Virtual Channel
    	Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
    	Kernel driver in use: r8169

Alles anzeigen

DoctorNo · 10. September 2012

und [fieldset] sudo /sbin/lspci -vnn [/fieldset]

Code

00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
    	Subsystem: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
    	Flags: bus master, 66MHz, medium devsel, latency 0
    	Capabilities: [c4] HyperTransport: Slave or Primary Interface
    	Capabilities: [54] HyperTransport: UnitID Clumping
    	Capabilities: [40] HyperTransport: Retry Mode
    	Capabilities: [9c] HyperTransport: #1a
    	Capabilities: [f8] HyperTransport: #1c


00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
    	Flags: bus master, 66MHz, medium devsel, latency 64
    	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    	I/O behind bridge: 0000b000-0000bfff
    	Memory behind bridge: f9c00000-f9dfffff
    	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    	Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
    	Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602]


00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
    	Flags: bus master, fast devsel, latency 0
    	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    	Memory behind bridge: f9e00000-f9efffff
    	Capabilities: [50] Power Management version 3
    	Capabilities: [58] Express Root Port (Slot+), MSI 00
    	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    	Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] Device [1022:9601]
    	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    	Capabilities: [110] Virtual Channel
    	Kernel driver in use: pcieport


00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
    	Flags: bus master, fast devsel, latency 0
    	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    	I/O behind bridge: 0000c000-0000cfff
    	Memory behind bridge: f9f00000-f9ffffff
    	Capabilities: [50] Power Management version 3
    	Capabilities: [58] Express Root Port (Slot+), MSI 00
    	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
    	Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] Device [1022:9601]
    	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    	Capabilities: [110] Virtual Channel
    	Kernel driver in use: pcieport


00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (rev 40) (prog-if 01 [AHCI 1.0])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 43
    	I/O ports at a000 [size=8]
    	I/O ports at 9000 [size=4]
    	I/O ports at 8000 [size=8]
    	I/O ports at 7000 [size=4]
    	I/O ports at 6000 [size=16]
    	Memory at f9bffc00 (32-bit, non-prefetchable) [size=1K]
    	Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+
    	Capabilities: [70] SATA HBA v1.0
    	Capabilities: [a4] PCI Advanced Features
    	Kernel driver in use: ahci


00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    	Memory at f9bfe000 (32-bit, non-prefetchable) [size=4K]
    	Kernel driver in use: ohci_hcd


00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    	Memory at f9bff800 (32-bit, non-prefetchable) [size=256]
    	Capabilities: [c0] Power Management version 2
    	Capabilities: [e4] Debug port: BAR=1 offset=00e0
    	Kernel driver in use: ehci_hcd


00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    	Memory at f9bfd000 (32-bit, non-prefetchable) [size=4K]
    	Kernel driver in use: ohci_hcd


00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    	Memory at f9bff400 (32-bit, non-prefetchable) [size=256]
    	Capabilities: [c0] Power Management version 2
    	Capabilities: [e4] Debug port: BAR=1 offset=00e0
    	Kernel driver in use: ehci_hcd


00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42)
    	Flags: 66MHz, medium devsel


00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    	I/O ports at 01f0 [size=8]
    	I/O ports at 03f4 [size=1]
    	I/O ports at 0170 [size=8]
    	I/O ports at 0374 [size=1]
    	I/O ports at ff00 [size=16]
    	Kernel driver in use: pata_atiixp


00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
    	Subsystem: ASUSTeK Computer Inc. M4A89GTD PRO/USB3 Motherboard [1043:8410]
    	Flags: bus master, slow devsel, latency 64, IRQ 16
    	Memory at f9bf8000 (64-bit, non-prefetchable) [size=16K]
    	Capabilities: [50] Power Management version 2
    	Kernel driver in use: snd_hda_intel


00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
    	Flags: bus master, 66MHz, medium devsel, latency 0


00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
    	Flags: bus master, 66MHz, medium devsel, latency 64
    	Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
    	I/O behind bridge: 0000d000-0000dfff
    	Memory behind bridge: fa000000-fe9fffff


00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    	Memory at f9bfc000 (32-bit, non-prefetchable) [size=4K]
    	Kernel driver in use: ohci_hcd


00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
    	Flags: bus master, fast devsel, latency 0
    	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    	I/O behind bridge: 0000e000-0000efff
    	Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
    	Capabilities: [50] Power Management version 3
    	Capabilities: [58] Express Root Port (Slot+), MSI 00
    	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    	Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] nee ATI Device [1002:0000]
    	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
    	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    	Kernel driver in use: pcieport


00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    	Memory at f9bf7000 (32-bit, non-prefetchable) [size=4K]
    	Kernel driver in use: ohci_hcd


00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
    	Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    	Memory at f9bff000 (32-bit, non-prefetchable) [size=256]
    	Capabilities: [c0] Power Management version 2
    	Capabilities: [e4] Debug port: BAR=1 offset=00e0
    	Kernel driver in use: ehci_hcd


00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
    	Flags: fast devsel
    	Capabilities: [80] HyperTransport: Host or Secondary Interface


00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
    	Flags: fast devsel


00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
    	Flags: fast devsel


00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
    	Flags: fast devsel
    	Capabilities: [f0] Secure device <?>
    	Kernel driver in use: k10temp


00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
    	Flags: fast devsel

Alles anzeigen

DoctorNo · 10. September 2012

Code

31: PCI 405.2: 11200 TV Card                                                                                                                                                                                                                                               	
  [Created at pci.319]                                                                                                                                                                                                                                                     	
  Unique ID: fziT.sSuFt6XcUO7                                                                                                                                                                                                                                              	
  Parent ID: qscc.UsCA9N2eQqB                                                                                                                                                                                                                                              	
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:04:05.2                                                                                                                                                                                                                  	
  SysFS BusID: 0000:04:05.2                                                                                                                                                                                                                                                	
  Hardware Class: tv card                                                                                                                                                                                                                                                  	
  Model: "Hauppauge computer works WinTV HVR-4000-HD"                                                                                                                                                                                                                      	
  Vendor: pci 0x14f1 "Conexant Systems, Inc."                                                                                                                                                                                                                              	
  Device: pci 0x8802 "CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port]"                                                                                                                                                                                               	
  SubVendor: pci 0x0070 "Hauppauge computer works Inc."                                                                                                                                                                                                                    	
  SubDevice: pci 0x6902 "WinTV HVR-4000-HD"                                                                                                                                                                                                                                	
  Revision: 0x05                                                                                                                                                                                                                                                           	
  Driver: "cx88-mpeg driver manager"                                                                                                                                                                                                                                       	
  Driver Modules: "cx8802"
  Memory Range: 0xfb000000-0xfbffffff (rw,non-prefetchable)
  IRQ: 20 (no events)
  Module Alias: "pci:v000014F1d00008802sv00000070sd00006902bc04sc80i00"
  Driver Info #0:
	Driver Status: cx8802 is active
	Driver Activation Cmd: "modprobe cx8802"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)
bblocal@genesis:~> /usr/sbin/hwinfo --tv
29: PCI 405.0: 11200 TV Card                                	
  [Created at pci.319]
  Unique ID: wJko.qd+lvzHCRd6
  Parent ID: qscc.UsCA9N2eQqB
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:04:05.0
  SysFS BusID: 0000:04:05.0
  Hardware Class: tv card
  Model: "Hauppauge computer works WinTV HVR-4000-HD"
  Vendor: pci 0x14f1 "Conexant Systems, Inc."
  Device: pci 0x8800 "CX23880/1/2/3 PCI Video and Audio Decoder"
  SubVendor: pci 0x0070 "Hauppauge computer works Inc."
  SubDevice: pci 0x6902 "WinTV HVR-4000-HD"
  Revision: 0x05
  Driver: "cx8800"
  Driver Modules: "cx8800"
  Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)
  IRQ: 20 (no events)
  Module Alias: "pci:v000014F1d00008800sv00000070sd00006902bc04sc00i00"
  Driver Info #0:
	Driver Status: cx8800 is active
	Driver Activation Cmd: "modprobe cx8800"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)


30: PCI 405.1: 11200 TV Card
  [Created at pci.319]
  Unique ID: oeDe.bg2V4gIBO8D
  Parent ID: qscc.UsCA9N2eQqB
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:04:05.1
  SysFS BusID: 0000:04:05.1
  Hardware Class: tv card
  Model: "Hauppauge computer works WinTV HVR-4000-HD"
  Vendor: pci 0x14f1 "Conexant Systems, Inc."
  Device: pci 0x8811 "CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port]"
  SubVendor: pci 0x0070 "Hauppauge computer works Inc."
  SubDevice: pci 0x6902 "WinTV HVR-4000-HD"
  Revision: 0x05
  Driver: "cx88_audio"
  Driver Modules: "cx88_alsa"
  Memory Range: 0xfc000000-0xfcffffff (rw,non-prefetchable)
  IRQ: 20 (no events)
  Module Alias: "pci:v000014F1d00008811sv00000070sd00006902bc04sc80i00"
  Driver Info #0:
	Driver Status: cx88-alsa is active
	Driver Activation Cmd: "modprobe cx88-alsa"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)


31: PCI 405.2: 11200 TV Card
  [Created at pci.319]
  Unique ID: fziT.sSuFt6XcUO7
  Parent ID: qscc.UsCA9N2eQqB
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:04:05.2
  SysFS BusID: 0000:04:05.2
  Hardware Class: tv card
  Model: "Hauppauge computer works WinTV HVR-4000-HD"
  Vendor: pci 0x14f1 "Conexant Systems, Inc."
  Device: pci 0x8802 "CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port]"
  SubVendor: pci 0x0070 "Hauppauge computer works Inc."
  SubDevice: pci 0x6902 "WinTV HVR-4000-HD"
  Revision: 0x05
  Driver: "cx88-mpeg driver manager"
  Driver Modules: "cx8802"
  Memory Range: 0xfb000000-0xfbffffff (rw,non-prefetchable)
  IRQ: 20 (no events)
  Module Alias: "pci:v000014F1d00008802sv00000070sd00006902bc04sc80i00"
  Driver Info #0:
	Driver Status: cx8802 is active
	Driver Activation Cmd: "modprobe cx8802"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)

Alles anzeigen

DoctorNo · 10. September 2012

Soweit so gut die Karte selbst wird vom System offensichtlich erkannt.
[fieldset]sudo /usr/sbin/hwinfo --tv[/fieldset]

Code

29: PCI 405.0: 11200 TV Card                                	
  [Created at pci.319]
  Unique ID: wJko.qd+lvzHCRd6
  Parent ID: qscc.UsCA9N2eQqB
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:04:05.0
  SysFS BusID: 0000:04:05.0
  Hardware Class: tv card
  Model: "Hauppauge computer works WinTV HVR-4000-HD"
  Vendor: pci 0x14f1 "Conexant Systems, Inc."
  Device: pci 0x8800 "CX23880/1/2/3 PCI Video and Audio Decoder"
  SubVendor: pci 0x0070 "Hauppauge computer works Inc."
  SubDevice: pci 0x6902 "WinTV HVR-4000-HD"
  Revision: 0x05
  Driver: "cx8800"
  Driver Modules: "cx8800"
  Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)
  IRQ: 20 (no events)
  Module Alias: "pci:v000014F1d00008800sv00000070sd00006902bc04sc00i00"
  Driver Info #0:
	Driver Status: cx8800 is active
	Driver Activation Cmd: "modprobe cx8800"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)


30: PCI 405.1: 11200 TV Card
  [Created at pci.319]
  Unique ID: oeDe.bg2V4gIBO8D
  Parent ID: qscc.UsCA9N2eQqB
  SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:04:05.1
  SysFS BusID: 0000:04:05.1
  Hardware Class: tv card
  Model: "Hauppauge computer works WinTV HVR-4000-HD"
  Vendor: pci 0x14f1 "Conexant Systems, Inc."
  Device: pci 0x8811 "CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port]"                                                                                                                                                                                              	
  SubVendor: pci 0x0070 "Hauppauge computer works Inc."                                                                                                                                                                                                                    	
  SubDevice: pci 0x6902 "WinTV HVR-4000-HD"                                                                                                                                                                                                                                	
  Revision: 0x05                                                                                                                                                                                                                                                           	
  Driver: "cx88_audio"                                                                                                                                                                                                                                                     	
  Driver Modules: "cx88_alsa"                                                                                                                                                                                                                                              	
  Memory Range: 0xfc000000-0xfcffffff (rw,non-prefetchable)                                                                                                                                                                                                                	
  IRQ: 20 (no events)                                                                                                                                                                                                                                                      	
  Module Alias: "pci:v000014F1d00008811sv00000070sd00006902bc04sc80i00"                                                                                                                                                                                                    	
  Driver Info #0:                                                                                                                                                                                                                                                          	
	Driver Status: cx88-alsa is active                                                                                                                                                                                                                                     	
	Driver Activation Cmd: "modprobe cx88-alsa"                                                                                                                                                                                                                            	
  Config Status: cfg=no, avail=yes, need=no, active=unknown                                                                                                                                                                                                                	
  Attached to: #13 (PCI bridge)

Alles anzeigen

DoctorNo · 10. September 2012

Hallo openSUSE Forum,

ich habe ein Problem meine Hauppauge WinTV-HVR-4000 TV-Karte zum laufen zu bekommen.
Da ich mich schon fast 5 Tage tot gegoogelt habe und keine Loesung gefunden habe wende ich mich nun an euch und hoffe auf eine Loesung.

Also ok erstmal zu meinem System:
OS: openSUSE 12.2
DE: KDE 4.8.4 r2
TV-Karte: Hauppauge WinTV-HVR-4000 mitDVB-S2/DVB-T/FM Tuner und die Karte ist via PCI angeschlossen.

Beiträge von DoctorNo

openldap einrichten

Verschlüsselte Root-Partition über ein Keyfile auf einem USB-Stick einbinden

openldap einrichten

Verschlüsselte Root-Partition über ein Keyfile auf einem USB-Stick einbinden

Hauppauge WinTV-HVR-4000 TV-Karte findet keine Sender

Hauppauge WinTV-HVR-4000 TV-Karte findet keine Sender

Hauppauge WinTV-HVR-4000 TV-Karte findet keine Sender

Hauppauge WinTV-HVR-4000 TV-Karte findet keine Sender

Hauppauge WinTV-HVR-4000 TV-Karte findet keine Sender

Hauppauge WinTV-HVR-4000 TV-Karte findet keine Sender

Tastaturabfrage unter C

Taskleiste startet nicht

Proxmox VE 8.2 hilft mit Assistent beim Umzug von VMware

Probleme mit dem Ausdruck von pdf-Dateien über Okular

USB WLAN Sticks für Opensuse?

MichaRadius

A_Kueb

Kukulkan

vpn

Nidrnox