okay, also er hat jetzt ganz normal gestartet. Könnte aber sein, dass das trotzdem noch mal wiederkommt, weil er das ja nur manchmal gemacht hatte.
Schauen wir mal.
Ich lass das Thema noch ein wenig offen. Ich gehe mal davon aus, dass wenn er bis Sonntag durchgehalten hat, der Fehler ist. Dann schließ ich es sonst.
bis dahin erst mal vielen Dank und schönen (fehlerfreien) abend 
lspci:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [Quadro 1000M] (rev ff)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
0d:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 08)
0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
bei journalctl -xb | grep -i -B20 -A20 ebridge kommt nichts, nee. nur wieder eine neue Zeile, als ob er etwas gemacht hat. 
Beim Hochfahren kommt es, direkt, wenn er den Kernel lädt.
dann kommen diese beiden Fehler in der Endlosschleife und man hat keine Chance mehr in System weiter einzugreifen. Man muss dann neu starten und hoffen, dass der Fehler nicht wieder kommt.
hat keiner eine Idee?
also ich hab da ein wenig Angst. er hate das heute morgen schon wieder. Muss dann während des Hochfahrens "mit Gewalt" ausmachen und neu starten. Irgendwann fährt er gar nicht mehr hoch :(.
Wahrscheinlich ist es besser, ich lasse ihn erst mal nur in der Suspend to Disk runterfahren.
"ebridge" ist übrigens auch nicht blacklisted
#
# $Id$
#
# Listing a module here prevents modprobe from loading it via modalias (only
# aliases from /lib/modules/*/modules.alias). You may still load it explicitely.
# We blacklist some modules becaus they may harm on certain devices or they
# prevent other modules from grabbing the device.
#
# Syntax: blacklist <driver name>
# See 'man modprobe'.
#
# usbcore ... module is loaded implicitly, ignore it otherwise
blacklist usbcore
# tulip ... de4x5, xircom_tulip_cb, dmfe (...) handle same devices
blacklist de4x5
# At least 2.4.3 and later xircom_tulip doesn't have that conflict
# xircom_tulip_cb
blacklist dmfe
# list all framebuffer drivers, some of them tend to crash during boot
# they are either compiled into the kernel, or vesafb is active
# X works fine without them, rcfbset can load them if really required
# sed -e '/\/drivers\/video\/.*\.\(o\|ko\)$/{s@^.*/@@;s@\..*$@@;p};d'
blacklist aty128fb
blacklist atyfb
blacklist cyber2000fb
blacklist g450_pll
blacklist hgafb
blacklist i2c-matroxfb
blacklist i810fb
blacklist intelfbdrv
blacklist intelfbhw
blacklist matroxfb_accel
blacklist matroxfb_base
blacklist matroxfb_crtc2
blacklist matroxfb_DAC1064
blacklist matroxfb_g450
blacklist matroxfb_maven
blacklist matroxfb_misc
blacklist matroxfb_proc
blacklist matroxfb_Ti3026
blacklist mdacon
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist radeonfb
blacklist rivafb
blacklist sisfb
blacklist sstfb
blacklist tdfxfb
blacklist tridentfb
blacklist vga16fb
blacklist vgastate
# for kyrofb see Bug 35810
blacklist kyrofb
# list was not complete (bug 106715)
blacklist arcfb
blacklist backlight
blacklist lcd
blacklist cirrusfb
blacklist gx1fb
blacklist intelfb
blacklist macmodes
blacklist nvidiafb
blacklist s1d13xxxfb
blacklist savagefb
# additional modules since SLE11, bug 468964
blacklist arkfb
blacklist carminefb
blacklist gxfb
blacklist hecubafb
blacklist lxfb
blacklist s3fb
blacklist sm501fb
blacklist viafb
blacklist vmlfb
blacklist vt8623fb
#bug 846218
blacklist udlfb
# ISDN modules are load from /lib/udev/isdn.sh
blacklist fcusb
blacklist fcusb2
blacklist fxusb
blacklist fxusb_CZ
blacklist fcdslusb
blacklist fcdslusb2
blacklist fcdslusba
blacklist fcdslslusb
blacklist fcdslslusb2
blacklist e2220pc
blacklist e5520pc
blacklist bfusb
blacklist b1isa
blacklist b1pci
blacklist b1pcmcia
blacklist c4
blacklist t1isa
blacklist t1pci
blacklist divas
blacklist act2000
blacklist hfc_usb
blacklist hisax
blacklist hisax_fcpcipnp
blacklist hisax_st5481
blacklist hysdn
blacklist icn
blacklist pcbit
blacklist sc
blacklist tpam
blacklist fcpci
blacklist fcclassic
blacklist fcdsl
blacklist fcdsl2
# mISDN modules
blacklist hfcsusb
blacklist hfcpci
blacklist hfcmulti
blacklist l1oip
blacklist mISDN_dsp
blacklist mISDN_core
# OSS PCI sound modules
blacklist ad1889
blacklist ali5455
blacklist btaudio
blacklist cmpci
blacklist cs4281
blacklist emu10k1
blacklist es1370
blacklist es1371
blacklist esssolo1
blacklist forte
blacklist i810_audio
blacklist maestro
blacklist maestro3
blacklist nm256_audio
blacklist opl3sa2 # Bug 219758
blacklist rme96xx
blacklist sonicvibes
blacklist trident
blacklist via82cxxx_audio
blacklist ymfpci
# this is a debugging module which should only be loaded manually
blacklist evbug
# These mtd drivers should be loaded manually.
blacklist scb2_flash
blacklist pci
blacklist l440gx
blacklist amd76xrom
# job of rcdvb
blacklist snd-bt87x
# This module seems to be good for nothing. See bug 129301.
blacklist dpt_i2o
# These devices have bt878 chip without PCI Subsystem ID. Without that info bttv
# does not know how to treat them properly. Therefore we disable autoloading of
# modules for these devices.
# See https://bugzilla.novell.com/show_bug.cgi?id=149588
# To enable your device create a hardware configuration file for your device.
# See man hwup for details.
# You will probably have to specify an option to identify your card. Have a
# look in /usr/src/linux/Documentation/video4linux/CARDLIST.bttv.
alias pci:v0000109Ed0000036Esv00000000sd00000000bc04sc00i00 bttv_skip_it
alias pci:v0000109Ed00000878sv00000000sd00000000bc04sc80i00 bttv_skip_it
install bttv_skip_it echo "module alias skipped (bt878 chip without PCI Subsystem ID)"
# For some bridges both intel-agp and i82875p_edac are loaded. If i82875p_edac
# is loaded first it will grab the device. Then intel-agp doesn't work.
# Therefore we disable automatic loading of 82875p_edac. (Bug 213840)
blacklist i82875p_edac
#
# Blacklist the IBM s390 module for I/O dynamic configuration support
# Bug bnc#478601
blacklist chsc_sch
blacklist nouveauHallo
Tut mir leid, dass ich mich nocmals melden muss, aber das System hat da noch ein Problem beim Hochfahren manchmal.
Er schmeißt mir dann Folgendes raus:
error: driver 'ebridge' is already registed
nvidia-nvlink:alloc_chrdev_region failed:-16
gfxcard
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.366]
Unique ID: _Znp.uqbZjV88ZA6
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel 2nd Generation Core Processor Family Integrated Graphics Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0126 "2nd Generation Core Processor Family Integrated Graphics Controller"
SubVendor: pci 0x17aa "Lenovo"
SubDevice: pci 0x21d1
Revision: 0x09
Driver: "i915"
Driver Modules: "drm"
Memory Range: 0xf1400000-0xf17fffff (rw,non-prefetchable)
Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
I/O Ports: 0x6000-0x603f (rw)
IRQ: 26 (3188 events)
Module Alias: "pci:v00008086d00000126sv000017AAsd000021D1bc03sc00i00"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Config Status: cfg=no, avail=yes, need=no, active=unknown
24: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.366]
Unique ID: VCu0.M2PFzLQNJn1
Parent ID: vSkL.uZwZKl9QSG3
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "nVidia GF108GLM [Quadro 1000M]"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0dfa "GF108GLM [Quadro 1000M]"
SubVendor: pci 0x17aa "Lenovo"
SubDevice: pci 0x21d1
Revision: 0xff
Memory Range: 0xf0000000-0xf0ffffff (rw,non-prefetchable)
Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
Memory Range: 0xd0000000-0xd1ffffff (ro,non-prefetchable)
I/O Ports: 0x5000-0x5fff (rw)
Memory Range: 0xf1000000-0xf107ffff (ro,non-prefetchable)
IRQ: 16 (16729 events)
Module Alias: "pci:v000010DEd00000DFAsv000017AAsd000021D1bc03sc00i00"
Driver Info #0:
Driver Status: nouveau is not active
Driver Activation Cmd: "modprobe nouveau"
Driver Info #1:
Driver Status: nvidia is not active
Driver Activation Cmd: "modprobe nvidia"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #8 (PCI bridge)
Primary display adapter: #9
Es gab dazu mal wieder nicht besonders viel im i-net. Ich habe einen Eintrag im Ubuntuforum gefunden, wo es hauptsächlich auf einen Eintrag in der blacklist.conf hianus lief.
Wie seht Ihr denn das? und danke schon mal 
/sbin/lspci -nnk | grep -EiA3 'vga|3d|display' ist
/sbin/lspci -nnk | grep -EiA3 'vga|3d|display'
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
Subsystem: Lenovo Device [17aa:21d1]
Kernel driver in use: i915
Kernel modules: i915
--
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller [8086:1c3d] (rev 04)
Subsystem: Lenovo Device [17aa:21cf]
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
--
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108GLM [Quadro 1000M] [10de:0dfa] (rev ff)
Kernel modules: nouveau, nvidia
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]ja, oke
hab ich schon markiert.
DANKE noch mal
guck mal
lol
geil ---- fühl Dich mal euphorisch umarmt -----
die Susi läuft wieder
SSUUUUPPERR 
du bekommst die A 
wie xsession-error*?
ne, hab ich nicht eingegeben
tut mir leid: hat ein weilchen gedauert. ich wollt da nichts kaputt machen. aber gute anleitung
die xsession-errors-:0 wollt er nicht. --> invalids argument 