Beiträge von johnner

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
    link/ether f4:8e:38:83:34:b3 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 68:14:01:4c:9b:2d brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.106/24 brd 192.168.2.255 scope global dynamic wlan0
       valid_lft 1813635sec preferred_lft 1813635sec
    inet6 2003:8b:6e14:46db:6a14:1ff:fe4c:9b2d/128 scope global dynamic 
       valid_lft 14403sec preferred_lft 1803sec
    inet6 fe80::6a14:1ff:fe4c:9b2d/64 scope link 
       valid_lft forever preferred_lft forever
4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.1/24 scope global vboxnet0
       valid_lft forever preferred_lft forever

#
# hosts         This file describes a number of hostname-to-address
#               mappings for the TCP/IP subsystem.  It is mostly
#               used at boot time, when no name servers are running.
#               On small systems, this file can be used instead of a
#               "named" name server.
# Syntax:
#    
# IP-Address  Full-Qualified-Hostname  Short-Hostname
#


127.0.0.1	localhost
192.168.10.10   myapp.dev


# special IPv6 addresses
::1             localhost ipv6-localhost ipv6-loopback


fe00::0         ipv6-localnet


ff00::0         ipv6-mcastprefix
ff02::1         ipv6-allnodes
ff02::2         ipv6-allrouters
ff02::3         ipv6-allhosts
127.0.0.2	linux-sjqs linux-sjqs