Beiträge von fly74

>sensors-detect --auto
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: raspberrypi rpi
# Kernel: 4.12.14-lp150.11-default aarch64


Running in automatic mode, default answers to all questions
are assumed.


Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
modprobe: FATAL: Module cpuid not found in directory /lib/modules/4.12.14-lp150.11-default
Failed to load module cpuid.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No


Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Sorry, no supported PCI bus adapters found.


Next adapter: bcm2835 I2C adapter (i2c-2)
Do you want to scan it? (YES/no/selectively):


Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.


>/opt#sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

ls -al /sys/class/thermal/thermal_zone0/
total 0
drwxr-xr-x 3 root root    0 Jun 30 19:54 .
drwxr-xr-x 3 root root    0 Apr 23 10:12 ..
-r--r--r-- 1 root root 4096 Jun 30 16:01 available_policies
-rw-r--r-- 1 root root 4096 Jun 30 16:01 integral_cutoff
-rw-r--r-- 1 root root 4096 Jun 30 16:01 k_d
-rw-r--r-- 1 root root 4096 Jun 30 16:01 k_i
-rw-r--r-- 1 root root 4096 Jun 30 16:01 k_po
-rw-r--r-- 1 root root 4096 Jun 30 16:01 k_pu
-rw-r--r-- 1 root root 4096 Jun 30 16:01 mode
-rw-r--r-- 1 root root 4096 Jun 30 16:01 offset
-rw-r--r-- 1 root root 4096 Jun 30 16:01 passive
-rw-r--r-- 1 root root 4096 Jun 30 16:01 policy
drwxr-xr-x 2 root root    0 Jun 30 16:01 power
-rw-r--r-- 1 root root 4096 Jun 30 16:01 slope
lrwxrwxrwx 1 root root    0 Apr 23 10:12 subsystem -> ../../../../class/thermal
-rw-r--r-- 1 root root 4096 Jun 30 16:01 sustainable_power
-r--r--r-- 1 root root 4096 Jun 29 20:15 temp
-r--r--r-- 1 root root 4096 Jun 30 16:01 type
-rw-r--r-- 1 root root 4096 Apr 23 10:12 uevent