Code
smartctl -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp150.12.16-default] (SUSE RPM)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: 54BDP2HRT
LU WWN Device Id: 5 000039 582783f79
Firmware Version: AX0A4M
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Sep 3 18:07:40 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 253) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1194
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1600
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 8487
10 Spin_Retry_Count 0x0033 131 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1246
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 217
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 111
193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 142591
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Min/Max 8/57)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 082 082 000 Old_age Always - 7578
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 177
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 802 hours (33 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 50 30 40 b0 01 e0 48 sectors at LBA = 0x0001b040 = 110656
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 70 ad 01 e0 00 00:01:54.003 READ DMA EXT
25 00 00 70 a5 01 e0 00 00:01:53.993 READ DMA EXT
25 00 00 70 9d 01 e0 00 00:01:53.983 READ DMA EXT
25 00 00 70 95 01 e0 00 00:01:53.973 READ DMA EXT
25 00 00 70 8d 01 e0 00 00:01:53.965 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8473 -
# 2 Short offline Completed without error 00% 8456 -
# 3 Short offline Completed without error 00% 8440 -
# 4 Short offline Completed without error 00% 8417 -
# 5 Short offline Completed without error 00% 8410 -
# 6 Short offline Completed without error 00% 8391 -
# 7 Short offline Completed without error 00% 8366 -
# 8 Short offline Completed without error 00% 8360 -
# 9 Short offline Completed without error 00% 8343 -
#10 Short offline Completed without error 00% 8326 -
#11 Extended offline Aborted by host 90% 8188 -
#12 Extended offline Completed without error 00% 7654 -
#13 Extended offline Completed without error 00% 7565 -
#14 Extended offline Completed without error 00% 7235 -
#15 Extended offline Completed without error 00% 6751 -
#16 Extended offline Completed without error 00% 6523 -
#17 Extended offline Completed without error 00% 6192 -
#18 Extended offline Completed without error 00% 5680 -
#19 Extended offline Completed without error 00% 5106 -
#20 Extended offline Completed without error 00% 4535 -
#21 Extended offline Completed: electrical failure 90% 3769 0
1 of 1 failed self-tests are outdated by newer successful extended offline self-test #12
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
