Versuche Mal:
Codechown root:cdrom /usr/bin/cdrecord /usr/bin/cdrdao chmod 4750 /usr/bin/cdrecord /usr/bin/cdrdao
bricht mit Fehler ab. Die Logdatei sieht aber jetzt ganz anders aus:
Ixch schicke einmal alles.
Code
ASUS SDRW-08D2S-U BA01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RW Eingeschränktes Überschreiben, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben, Sprung zwischen DVD-Schichten] [%7]
System
-----------------------
K3b Version: 20.4.2
KDE Version: 5.76.0
Qt Version: 5.12.7
Kernel: 5.3.18-150300.59.49-default
Used versions
-----------------------
cdrecord: 3.2a09
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.02a09 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2016 Joerg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'ASUS '
Identifikation : 'SDRW-08D2S-U '
Revision : 'BA01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+R/DL
Profile: DVD+R/DL (current)
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 393216 = 384 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 2147 MB
Total size: 2147 MB = 1099440 sectors
Current Secsize: 2048
Blocks total: 4173824 Blocks current: 4173824 Blocks remaining: 3074384
Reducing transfer size from 64512 to 32768 bytes.
Forcespeed is OFF.
Starting to write CD/DVD/BD at speed 6 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... cdrecord: Layer 0 size 2086912 is bigger than expected disk size 1099440.
cdrecord: Use single layer medium.
cdrecord: Cannot open next track.
input buffer ready.
Writing time: 0.020s (00:00:00.020)
Average write speed 999,0x.
Fixating...
cdrecord: Eingabe-/Ausgabefehler. close track/session: scsi sendcmd: no error
CDB: 5B 01 06 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 1000s
cdrecord: Eingabe-/Ausgabefehler. close track/session: scsi sendcmd: no error
CDB: 5B 01 06 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 06 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x06 (cannot format medium - incompatible medium) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.004s timeout 1000s
=== last message repeated 2 times. ===
Trouble closing the last session
Fixating time: 0.018s (00:00:00.018)
cdrecord: fifo had 128 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
BURN-Free was not used.
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=6 -sao driveropts=burnfree -data -tsize=1099440s -
