Beiträge von Linux-Idefix
-
-
xsane neu installiert was nun
-
Habe auch schon zwischen usb2 und 3 gewächselt
-
Code
susb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 8087:0a2a Intel Corp. Bus 001 Device 003: ID 04f2:b56d Chicony Electronics Co., Ltd Bus 001 Device 005: ID 04f9:0182 Brother Industries, Ltd Composite Device Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -
Was ich verstehe nicht aber habe....
Code
Alles anzeigenscanimage -L [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.24 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: opendir failed: No such file or directory [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `brother2' [dll] sane_get_devices [dll] load: searching backend `brother2' in `/usr/lib64/sane' [dll] load: trying to load `/usr/lib64/sane/libsane-brother2.so.1' [dll] load: dlopen()ing `/usr/lib64/sane/libsane-brother2.so.1' [dll] init: initializing backend `brother2' [dll] init: backend `brother2' is version 1.0.1 [dll] sane_get_devices: found 1 devices device `brother2:bus2;dev3' is a Brother DCP-7010 USB scanner [dll] sane_exit: exiting [dll] sane_exit: calling backend `brother2's exit function [dll] sane_exit: finished
lsusb = Bus 001 Device 005: ID 04f9:0182 Brother Industries, Ltd Composite Device -
yast scanner andere test kommt Fehlermeldung:Test mit scanimage -d -v fehlgeschlagen
-
Beim Test kommt das ist da was dabei?
Code
Alles anzeigenscanimage -d -v [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.24 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: opendir failed: No such file or directory [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `brother2' [dll] sane_open: trying to open `-v' [dll] add_backend: adding backend `-v' [dll] load: searching backend `-v' in `/usr/lib64/sane' [dll] load: trying to load `/usr/lib64/sane/libsane--v.so.1' [dll] load: couldn't open `/usr/lib64/sane/libsane--v.so.1' (No such file or directory) [dll] load: couldn't find backend `-v' (No such file or directory) scanimage: open of device -v failed: Invalid argument [dll] sane_exit: exiting [dll] sane_exit: finished -
Erst ein mal ein großen Dank für euer bemühen
Habe den user die Ip gruppe zugewiesen
yast alle Brother einträge gelösch
Treiber entferntNeu eingerichtet mit
Code
Alles anzeigenbash linux-brprinter-installer-*.*.*-* DCP-7010 You are going to install following packages. brdcp7010lpr-2.0.1-1.i386.rpm cupswrapperDCP7010-2.0.1-1.i386.rpm brscan2-0.2.5-1.x86_64.rpm brscan-skey-0.2.4-1.x86_64.rpm OK? [y/N] ->y rpm -ihv --nodeps --replacefiles --replacepkgs brdcp7010lpr-2.0.1-1.i386.rpm Preparing... ################################# [100%] Updating / installing... 1:brdcp7010lpr-2.0.1-1 ################################# [100%] rpm -ihv --nodeps --replacefiles --replacepkgs cupswrapperDCP7010-2.0.1-1.i386.rpm Preparing... ######################################## Updating / installing... cupswrapperDCP7010-2.0.1-1 ######################################## # The security level of AppArmor has been lowered. (aa-complain cups) aa-complain cupsd Profile for /usr/sbin/cupsd not found, skipping Will you specify the Device URI? [Y/n] ->n Test Print? [y/N] ->n You are going to install following packages. brscan2-0.2.5-1.x86_64.rpm rpm -ihv --nodeps --replacefiles --replacepkgs brscan2-0.2.5-1.x86_64.rpm Preparing... ################################# [100%] Updating / installing... 1:brscan2-0.2.5-1 ################################# [100%] You are going to install following packages. brscan-skey-0.2.4-1.x86_64.rpm rpm -ihv --nodeps --replacefiles --replacepkgs brscan-skey-0.2.4-1.x86_64.rpm Preparing... ################################# [100%] Updating / installing... 1:brscan-skey-0.2.4-1 ################################# [100%]Code
Alles anzeigenexport SANE_DEBUG_DLL=255 ; scanimage -L [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.24 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: opendir failed: No such file or directory [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `brother2' [dll] sane_get_devices [dll] load: searching backend `brother2' in `/usr/lib64/sane' [dll] load: trying to load `/usr/lib64/sane/libsane-brother2.so.1' [dll] load: dlopen()ing `/usr/lib64/sane/libsane-brother2.so.1' [dll] init: initializing backend `brother2' [dll] init: backend `brother2' is version 1.0.1 [dll] sane_get_devices: found 1 devices device `brother2:bus2;dev3' is a Brother DCP-7010 USB scanner [dll] sane_exit: exiting [dll] sane_exit: calling backend `brother2's exit function [dll] sane_exit: finishedCodelsusb Bus 001 Device 002: ID 04f9:0182 Brother Industries, Ltd Composite Device
Eine Sache fällt mir auf dass man in yast scanner das modell nicht auswählen kann nur er wird automatisch erkanntweis mir keinen rat
-
Berechtigungen:
Brother Solutions Center : Brother Driver for Linux Distributions
Hast du ja schon selbst gefunden und auch ausgeführt.......
# BrotherATTR{idVendor}=="04f9", MODE="0664", GROUP="lp", ENV{libsane_matched}="yes"Kann sein dass da ATTR{idProduct}=="....", fehlt?
weis aber nicht die nummerskanlite = Medung "Opening the selected scanner failed."
als root skanlite="Opening the selected scanner failed."
Xsane="Fehler beim öffnen des geräts..."wie beschrieben
als root=fail to open derive
Code
Alles anzeigenzypper se -si sane brscan dcp7010 Repository-Daten werden geladen... Installierte Pakete werden gelesen... S | Name | Typ | Version | Arch | Repository --+--------------------------+-------+-------------+--------+----------------------- i | brdcp7010lpr | Paket | 2.0.1-1 | i386 | (Systempakete) i | brscan-skey | Paket | 0.2.4-1 | x86_64 | DL i | brscan2 | Paket | 0.2.5-1 | x86_64 | DL i | cupswrapperDCP7010 | Paket | 2.0.1-1 | i386 | (Systempakete) i | hplip-sane | Paket | 3.16.5-1.5 | x86_64 | openSUSE-Leap-42.2-Oss i | hplip-sane | Paket | 3.16.5-1.5 | x86_64 | openSUSE-42.2-0 i | libKF5Sane5 | Paket | 16.08.2-1.1 | x86_64 | openSUSE-Leap-42.2-Oss i | libKF5Sane5 | Paket | 16.08.2-1.1 | x86_64 | openSUSE-42.2-0 i | sane-backends | Paket | 1.0.24-4.40 | x86_64 | openSUSE-Leap-42.2-Oss i | sane-backends | Paket | 1.0.24-4.40 | x86_64 | openSUSE-42.2-0 i | sane-backends-autoconfig | Paket | 1.0.24-4.40 | x86_64 | openSUSE-Leap-42.2-Oss i | sane-backends-autoconfig | Paket | 1.0.24-4.40 | x86_64 | openSUSE-42.2-0 i | xsane | Paket | 0.998-26.5 | x86_64 | openSUSE-Leap-42.2-Oss i | xsane | Paket | 0.998-26.5 | x86_64 | openSUSE-42.2-0 -
Wo könnte denn das Problem liegen bin user kann drucken der drucker ist ein multifunktionsgerät, er ist an einer usb schnittstelle angeschlosen, mehr weis ich nits mehr
idefix
