Hier einmal das Ergebnis von hwinfo --netcard
und im Anhang die Ausgabe von collectNWData:
Code
linux-i6mn:~ # hwinfo --netcard
21: PCI 0a.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_10de_ab0
Unique ID: rBUF.oqwGkUu2mc8
SysFS ID: /devices/pci0000:00/0000:00:0a.0
SysFS BusID: 0000:00:0a.0
Hardware Class: network
Model: "nVidia MCP79 Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0ab0 "MCP79 Ethernet"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3651
Revision: 0xb1
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth0
Memory Range: 0x53106000-0x53106fff (rw,non-prefetchable)
I/O Ports: 0x30e0-0x30e7 (rw)
Memory Range: 0x53109000-0x531090ff (rw,non-prefetchable)
Memory Range: 0x53109300-0x5310930f (rw,non-prefetchable)
IRQ: 27 (4365 events)
HW Address: 00:26:9e:3b:83:48
Link detected: yes
Module Alias: "pci:v000010DEd00000AB0sv0000103Csd00003651bc02sc00i00"
Driver Info #0:
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
Config Status: cfg=no, avail=yes, need=no, active=unknown
27: PCI 300.0: 0282 WLAN controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_14e4_4315
Unique ID: JNkJ.1gy0hwEzRF2
Parent ID: Rgik.hnyKoNyRNn2
SysFS ID: /devices/pci0000:00/0000:00:15.0/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Broadcom BCM4312 802.11b/g"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4315 "BCM4312 802.11b/g"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x365e
Revision: 0x01
Driver: "wl"
Driver Modules: "wl"
Device File: eth1
Features: WLAN
Memory Range: 0x53000000-0x53003fff (rw,non-prefetchable)
IRQ: 16 (1170 events)
HW Address: 0c:60:76:28:04:db
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN bitrates: 1 2 5.5 6 9 11 12 18 24 36 48 54
WLAN encryption modes: WEP40 WEP104 WEP256 WEP128 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d00004315sv0000103Csd0000365Ebc02sc80i00"
Driver Info #0:
Driver Status: ssb is not active
Driver Activation Cmd: "modprobe ssb"
Driver Info #1:
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #24 (PCI bridge)