Beiträge von PGPGPG

PGPGPG · 18. Juli 2010

Fürchte, Du hast recht. Ich hätte gerne versucht, im "OpenSuse-Standard" zu bleiben, aber das scheint mir auch zu kompliziert zu sein. Dann also nvidia-treiber.

PGPGPG · 18. Juli 2010

krandtray gestartet. mit rechter Maus im tray versucht, aber mir wird nur 1280x800 angeboten.
Man muss dazu sagen, dass mein Monitor nur 2 Auflösungen kann: 1280x800 oder 2560x1600.
Damit hat sich die Frage des Speicherns leider erübrigt.

Was mich nur wundert? Eigentlich erkennt das OS meinen Monitor (s. Screenshot in meinem ersten Beitrag).

PGPGPG · 18. Juli 2010

Hi robbie,

wahrscheinlich bleibt mir gar nicht viel anderes übrig, als den nvidia-Treiber manuell zu installieren.

Die von Dir genannte /etc/X11/xorg.conf.install sieht bei mir wenig freundlich

Code

Section "Device"
  Identifier "vboxvideo"
  Driver  "vboxvideo"
EndSection


Section "Screen"
  Identifier "vboxvideo"
  Device "vboxvideo"
EndSection




Section "Device"
  Identifier "vmware"
  Driver  "vmware"
EndSection


Section "Screen"
  Identifier "vmware"
  Device "vmware"
EndSection




Section "Device"
  Identifier "cirrus"
  Driver  "cirrus"
EndSection
Section "Screen"
  Identifier "cirrus"
  Device "cirrus"
EndSection




Section "Device"
  Identifier "fbdev"
  Driver  "fbdev"
EndSection
Section "Screen"
  Identifier "fbdev"
  Device "fbdev"
EndSection




Section "Device"
  Identifier "vesa"
  Driver  "vesa"
EndSection


Section "Screen"
  Identifier "vesa"
  Device "vesa"
EndSection




Section "ServerLayout"
  Identifier "Layout"
  Screen  "vboxvideo"
  Screen  "vmware"
  Screen  "cirrus"
  Screen  "fbdev"
  Screen  "vesa"
EndSection

Alles anzeigen

aus.

Ein bisschen besser, ist die /root/xorg.conf.new

Code

Section "ServerLayout"
	Identifier 	"X.org Configured"
	Screen  	0  "Screen0" 0 0
	InputDevice	"Mouse0" "CorePointer"
	InputDevice	"Keyboard0" "CoreKeyboard"
EndSection


Section "Files"
	ModulePath   "/usr/lib64/xorg/modules/updates"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath 	"/usr/share/fonts/misc:unscaled"
	FontPath 	"/usr/share/fonts/TTF/"
	FontPath 	"/usr/share/fonts/OTF/"
	FontPath 	"/usr/share/fonts/Type1/"
	FontPath 	"/usr/share/fonts/100dpi:unscaled"
	FontPath 	"/usr/share/fonts/75dpi:unscaled"
	FontPath 	"/usr/share/fonts/URW/"
	FontPath 	"/usr/share/fonts/cyrillic:unscaled"
	FontPath 	"/usr/share/fonts/misc/sgi:unscaled"
	FontPath 	"/usr/share/fonts/truetype/"
EndSection


Section "Module"
	Load  "glx"
	Load  "extmod"
	Load  "vnc"
	Load  "record"
	Load  "dri2"
	Load  "dbe"
	Load  "dri"
EndSection


Section "InputDevice"
	Identifier  "Keyboard0"
	Driver  	"kbd"
EndSection


Section "InputDevice"
	Identifier  "Mouse0"
	Driver  	"mouse"
	Option		"Protocol" "auto"
	Option		"Device" "/dev/input/mice"
	Option		"ZAxisMapping" "4 5 6 7"
EndSection


Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName	"Monitor Model"
EndSection


Section "Device"
    	### Available Driver options are:-
    	### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    	### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    	### [arg]: arg optional
    	#Option 	"SWcursor"       		# [<bool>]
    	#Option 	"HWcursor"       		# [<bool>]
    	#Option 	"NoAccel"        		# [<bool>]
    	#Option 	"ShadowFB"       		# [<bool>]
    	#Option 	"VideoKey"       		# <i>
	Identifier  "Card0"
	Driver  	"nouveau"
	VendorName  "nVidia Corporation"
	BoardName   "G94 [GeForce 9600 GT]"
	BusID   	"PCI:1:0:0"
EndSection


Section "Screen"
	Identifier "Screen0"
	Device 	"Card0"
	Monitor	"Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth 	1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth 	4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth 	8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth 	15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth 	16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth 	24
	EndSubSection
EndSection

Alles anzeigen

Aber hier wird mein Monitor nicht erkannt. Hatte ja vorhin geschrieben, dass das Script mit Fehler abbricht. Hier der volle Output:

Code

X.Org X Server 1.8.0
Release Date: 2010-04-02
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux tiger 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 x86_64
Kernel command line: root=/dev/md2 resume=/dev/disk/by-id/ata-SAMSUNG_HD103UJ_S1PVJ1NQ600858-part2 splash=silent quiet vga=0x346 nomodeset
Build Date: 05 July 2010  09:27:36PM
 
Current version of pixman: 0.18.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 18 14:32:03 2010
List of video drivers:
	nouveau
	s3
	sis
	radeon
	unichrome
	tdfx
	glint
	voodoo
	v4l
	tseng
	r128
	siliconmotion
	tga
	mach64
	chips
	sisusb
	cirrus
	newport
	rendition
	mga
	intellegacy
	nv
	savage
	s3virge
	i740
	intel
	dummy
	trident
	vmware
	i128
	ati
	radeonhd
	ark
	ast
	apm
	neomagic
	fbdev
	vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) [drm] No DRICreatePCIBusID symbol
Number of created screens does not match number of detected devices.
  Configuration failed.

Alles anzeigen

Wenn Du noch 'ne Idee hast, wie ich den Monitor vielleicht noch zu Fuss eintragen kann, würde ich das noch versuchen, ansonsten käme ich gerne auf Deinen Vorschlag zurück, kurz die Installation des nvidia-Treibers zu skizzieren.

PGPGPG · 18. Juli 2010

Zunächst mal habe ich geprüft, ob meine HW (Monitor, Grafikkarte) überhaupt erkannt wird. Dies scheint der Fall zu sein

Dennoch bekomme ich beim Booten den beschriebenen schwarzen Bildschirm und musste daher mit dem Kernelparameter nomodeset hochfahren. Waere ja eigtl. nicht schlimm, wenn mein Monitor damit in der vollen Auflösung betreibbar wäre.
Dem ist aber nicht so:

Meine xorg.conf sieht so aus:

Code

# /.../
# SaX generated X11 config file
# Created on: 2010-02-10T16:04:09+0100.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#


Section "Files"
  FontPath 	"/usr/share/fonts/misc:unscaled"
  FontPath 	"/usr/share/fonts/local"
  FontPath 	"/usr/share/fonts/75dpi:unscaled"
  FontPath 	"/usr/share/fonts/100dpi:unscaled"
  FontPath 	"/usr/share/fonts/Type1"
  FontPath 	"/usr/share/fonts/URW"
  FontPath 	"/usr/share/fonts/Speedo"
  FontPath 	"/usr/share/fonts/PEX"
  FontPath 	"/usr/share/fonts/cyrillic"
  FontPath 	"/usr/share/fonts/latin2/misc:unscaled"
  FontPath 	"/usr/share/fonts/latin2/75dpi:unscaled"
  FontPath 	"/usr/share/fonts/latin2/100dpi:unscaled"
  FontPath 	"/usr/share/fonts/latin2/Type1"
  FontPath 	"/usr/share/fonts/latin7/75dpi:unscaled"
  FontPath 	"/usr/share/fonts/baekmuk:unscaled"
  FontPath 	"/usr/share/fonts/japanese:unscaled"
  FontPath 	"/usr/share/fonts/kwintv"
  FontPath 	"/usr/share/fonts/truetype"
  FontPath 	"/usr/share/fonts/uni:unscaled"
  FontPath 	"/usr/share/fonts/CID"
  FontPath 	"/usr/share/fonts/ucs/misc:unscaled"
  FontPath 	"/usr/share/fonts/ucs/75dpi:unscaled"
  FontPath 	"/usr/share/fonts/ucs/100dpi:unscaled"
  FontPath 	"/usr/share/fonts/hellas/misc:unscaled"
  FontPath 	"/usr/share/fonts/hellas/75dpi:unscaled"
  FontPath 	"/usr/share/fonts/hellas/100dpi:unscaled"
  FontPath 	"/usr/share/fonts/hellas/Type1"
  FontPath 	"/usr/share/fonts/misc/sgi:unscaled"
  FontPath 	"/usr/share/fonts/xtest"
  FontPath 	"/opt/kde3/share/fonts"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
EndSection


Section "ServerFlags"
  # Uncomment the following option to reenable kbd/mouse driver input sections. 
  # Otherwise evdev driver is used. 
  #Option   	"AutoAddDevices" "off"
  Option   	"AllowMouseOpenFail" "on"
  Option   	"ZapWarning" "on"
EndSection


Section "Module"
  Load     	"dri"
  Load     	"dbe"
  Load     	"freetype"
  Load     	"extmod"
  Load     	"glx"
EndSection


Section "InputDevice"
  Driver   	"kbd"
  Identifier   "Keyboard[0]"
  Option   	"Protocol" "Standard"
  Option   	"XkbLayout" "de"
  Option   	"XkbModel" "microsoftpro"
  Option   	"XkbRules" "xfree86"
  Option   	"XkbVariant" "nodeadkeys"
EndSection




Section "InputDevice"
  Driver   	"evdev"
  Identifier   "Mouse[1]"
  Option   	"HWHEELRelativeAxisButtons" "7 6"
  Option   	"InputFashion" "Mouse"
  Option   	"Name" "Logitech VX Nano Laser Mouse"
  Option   	"Pass" "3"
  Option   	"Vendor" "Sysp"
  Option   	"evBits" "+1-2"
  Option   	"keyBits" "~272-287"
  Option   	"relBits" "~0-2 ~6 ~8"
EndSection


Section "InputDevice"
  Driver   	"mouse"
  Identifier   "Mouse[3]"
  Option   	"Buttons" "5"
  Option   	"Device" "/dev/input/mice"
  Option   	"Name" "ImPS/2 Generic Wheel Mouse"
  Option   	"Protocol" "explorerps/2"
  Option   	"Vendor" "Sysp"
  Option   	"ZAxisMapping" "4 5"
EndSection




Section "Monitor"
  Option   	"CalcAlgorithm" "XServerPool"
  DisplaySize  380 290
  HorizSync	30-90
  Identifier   "Monitor[0]"
  ModelName	"LP2065"
  Option   	"DPMS"
  Option   	"PreferredMode" "2560x1600"
  VendorName   "HP"
  VertRefresh  48-60
  UseModes 	"Modes[0]"
EndSection




Section "Modes"
  Identifier   "Modes[0]"
EndSection




Section "Screen"
  DefaultDepth 24
  SubSection "Display"
	Depth  	15
	Modes  	"2560x1600" "2048x1536" "1920x1440" "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
	Depth  	16
	Modes  	"2560x1600" "2048x1536" "1920x1440" "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
	Depth  	24
	Modes  	"2560x1600" "2048x1536" "1920x1440" "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
	Depth  	32
	Modes  	"2560x1600" "2048x1536" "1920x1440" "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
	Depth  	8
	Modes  	"2560x1600" "2048x1536" "1920x1440" "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  Device   	"Device[0]"
  Identifier   "Screen[0]"
  Monitor  	"Monitor[0]"
EndSection




Section "Device"
  BoardName	"GeForce 9600 GT"
  Driver   	"nv"
  Identifier   "Device[0]"
  VendorName   "NVidia"
EndSection






Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  InputDevice  "Mouse[3]" "SendCoreEvents"
  Option   	"Clone" "off"
  Option   	"Xinerama" "off"
  Screen   	"Screen[0]"
EndSection




Section "DRI"
	Group  	"video"
	Mode   	0660
EndSection


Section "Extensions"
  Option   	"Composite" "off"
EndSection

Alles anzeigen

Hier ist schon etwas schief gegangen. Unter Suse 11.2 hatte ich den HP LP2065 eingetragen und angepasst, weil der HP LP3065 nicht auswaehlbar war. Dieser Eintrag ist wohl stehengeblieben. Ein neuer Eintrag wurde anscheinend nicht generiert.

Als nächstes habe ich den Tipp von robbie versucht, xorg.conf umbenannt, unter root auf Level 3 und versucht, mir eine neue xorg.conf zu generieren.

Code

Xorg -configure

ist mit einem Fehler abgebrochen. Daher habe ich dann nur noch die alte xorg.conf zurückgespielt und mir den Rest von robbies Tipp geschenkt.

In messages finde ich die folgenden Fehler

Code

tiger:/var/log # grep drm messages
Jul 18 09:54:08 tiger kernel: [   81.417143] [drm] nouveau 0000:01:00.0: 0xC07D: parsing output script 2
Jul 18 09:54:08 tiger kernel: [   81.417162] [drm] nouveau 0000:01:00.0: 0xBF1A: parsing clock script 0
Jul 18 10:13:43 tiger kernel: [   41.113854] [drm] nouveau 0000:01:00.0: 0xC07D: parsing output script 2
Jul 18 10:13:43 tiger kernel: [   41.113874] [drm] nouveau 0000:01:00.0: 0xBF1A: parsing clock script 0
Jul 18 13:04:45 tiger kernel: [ 2721.147819] [drm] nouveau 0000:01:00.0: called without init

Was mache ich als nächstes?

Beiträge von PGPGPG

[Gelöst] Monitor einstellen

[Gelöst] Monitor einstellen

[Gelöst] Monitor einstellen

[Gelöst] Monitor einstellen

VMware Workstation Pro und Fusion Pro kostenlos für persönlichen Gebrauch

L2TP-VPN-Verbindungsprobleme unter Tumbleweed

Offizielle M.2-Adapterplatine für den Raspberry Pi 5 erhältlich

Überarbeitetes CachyOS unterstützt Bcachefs und bietet KI-SDK

Audio funktioniert nach dem letzten Upgrade schon wieder nicht mehr

redser45

turtoise

Pilz

Guinnmanss55

VMB