WPA-PSK wird höfig im Privaten bereich verwendet
WPA2-PSK solltest du wählen
Beiträge von MRKS
-
-
Ich habe in der konfiguration Networkmanager gewählt.
Was muss ich dann genau umändern?
Die Daten habe ich bereits im Networkmanager eingetragen, der usb-stick blinkt, jedoch ohne ergebnisCodera0 RT2870 Wireless ESSID:"Schlick-Wlan" Nickname:"RT2870STA" Mode:Auto Frequency=2.437 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:-55 dBm Noise level:-87 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Was ich noch umgeändert habe war:
-
ich konnte nach gcc und kernel sources installation make ausführen.
nach dem ich "/sbin/ifconfig ra0 inet 192.168.2.107 up" eingebe kommt per iwconfig:Code
Alles anzeigenlo no wireless extensions. eth0 no wireless extensions. ra0 RT2870 Wireless ESSID:"Schlick-Wlan" Nickname:"RT2870STA" Mode:Auto Frequency=2.437 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:0 dBm Noise level:-87 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Der SUB-Stick blinkt es entsteht aber keine Verbindung.Meine Konfiguration der RT2870STA.dat :
Code
Alles anzeigen#The word of "Default" must not be removed Default CountryRegion=5 CountryRegionABand=7 CountryCode=DE ChannelGeography=1 SSID=Wlan-Schlick NetworkType=Infra WirelessMode=0 Channel=9 BeaconPeriod=100 TxPower=100 BGProtection=0 TxPreamble=0 RTSThreshold=2347 FragThreshold=2346 TxBurst=1 PktAggregate=0 WmmCapable=1 AckPolicy=0;0;0;0 AuthMode=WPA2 EncrypType=AES WPAPSK=MYWPA2PASS DefaultKeyID=0 Key1Type=0 Key1Str= Key2Type=0 Key2Str= Key3Type=0 Key3Str= Key4Type=0 Key4Str= PSMode=CAM AutoRoaming=0 RoamThreshold=70 APSDCapable=0 APSDAC=0;0;0;0 HT_RDG=1 HT_EXTCHA=0 HT_OpMode=1 HT_MpduDensity=4 HT_BW=1 HT_BADecline=0 HT_AutoBA=1 HT_BADecline=0 HT_AMSDU=0 HT_BAWinSize=64 HT_GI=1 HT_MCS=33 HT_MIMOPSMode=3 HT_DisallowTKIP=1 IEEE80211H=0 TGnWifiTest=0 WirelessEvent=0 CarrierDetect=0 AntDiversity=0 BeaconLostTime=4
im router ist WPA1/2-Personal an. Sollte ich da nicht bei AuthMode: WPA2PSK schreiben?
Passwort habe ich raus genommen MYWPA2PASS -
lsusb
Code
Alles anzeigenBus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 006: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader Bus 007 Device 005: ID 0424:2602 Standard Microsystems Corp. Bus 007 Device 004: ID 0424:2502 Standard Microsystems Corp. Bus 007 Device 002: ID 07d1:3c09 D-Link System DWA-140 802.11n Adapter [ralink rt2870] Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 046d:c01d Logitech, Inc. MX510 Optical Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
KDE 4.1.3 (KDE 4.1.3) "release 4.9"
danke für deine Hilfe
-
Hier mein System:
Intel Core2Duo E6300
Hauptplatine: P5B
3 Festpletten (sata)
USB-Wlan: D-Link WAD-140Opensuse 11.1 von vorgestern
Linux ist nur auf eine festplatte installiert
swap: 2,1GB
Root 15GB
Home 25GBWlan ist per WPA 1/2-PSK abgesichert, sollte auch so bleiben
Windows Vista läuft auf einer anderen Festplatte
Keine Updates, keine Repositories da ich kein Internet unter linux habe.
lspci kommt in ein paar minuten
EDIT:
Code
Alles anzeigen00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) 00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) 00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GT] [10de:0391] (rev a1) 02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) 02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
-
Ich habe mir heute opensuse 11.1 drauf gespielt.
Nachdem der download von opensuse den falschen MD5-Hash hatte^^ und Fehler bei der InstallationIch habe einen D-Link WAD-140
ich habe bereits ndiswrapper installiert und rt2870.inf installiert.
Netzwerkkarte-Einrichtung ist eine Drahlosverbindung eingerichtet, wlan0 jedoch weiß ich nicht was bei Kernel Modul rein soll.
Die Verbindungsdaten sind alle angegeben, auch im Netzwerk-Controller oder wie das heißt.Eine Verbindung kommt nicht zustande.
Habt ihr noch eine Idee?