keine sender gefunden beim scannen.
nur dvb t wird angezeigt bei kaffeine
nicht tv
Beiträge von kama8
-
-
aha und was heisst das"
will do.You may need to add an offset to your tansponder frequencies (+166KHz) in order to tune properly though."
konkret ? -
-
Code
Subsystem: Hauppauge computer works Inc. Device [0070:8101] Kernel driver in use: cx23885 Kernel modules: cx23885
Code
Alles anzeigenBus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 0461:4d51 Primax Electronics, Ltd 0Y357C PMX-MMOCZUL (B) [Dell Laser Mouse] Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 413c:2010 Dell Computer Corp. Keyboard Bus 002 Device 002: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub linux-hv1z:~ #
-
Code
Alles anzeigen37: PCI 300.0: 11200 TV Card [Created at pci.366] Unique ID: svHJ.SH9++QJed9D Parent ID: qTvu.IoFuumwIArA SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: tv card Model: "Conexant CX23885 PCI Video and Audio Decoder" Vendor: pci 0x14f1 "Conexant Systems, Inc." Device: pci 0x8852 "CX23885 PCI Video and Audio Decoder" SubVendor: pci 0x0070 "Hauppauge computer works Inc." SubDevice: pci 0x8101 Revision: 0x04 Driver: "cx23885" Driver Modules: "cx23885" Memory Range: 0xfe200000-0xfe3fffff (rw,non-prefetchable) IRQ: 17 (1437 events) Module Alias: "pci:v000014F1d00008852sv00000070sd00008101bc04sc00i00" Driver Info #0: Driver Status: cx23885 is active Driver Activation Cmd: "modprobe cx23885" Config Status: cfg=no, avail=yes, need=no, active=unknown
-
ok
den pfad hab ich schon selber gewechselt und das dvb weggelassen
aber eine ausgabe gibt es nicht, weil du ja nur einen prozess ausliest.
es kommen keine daten zu dvb
wie kommen wir weiter ? -
-
hi
ich hab opensuse leap42.1 und eine hauppauge win tv (hrv) 1700 karte
habe :
dvb software installiert
kaffeine
firmware
w-scankaffeine erkennt: nxp tda 10048 hn dvb-t
nach scannen kaffeine erkennt der nichts:
undCode
Alles anzeigenw_scan -c DE w_scan version 20141122 (compiled for DVB API 5.10) using settings for GERMANY DVB aerial DVB-T Europe scan type TERRESTRIAL, channellist 4 output format vdr-2.0 output charset 'UTF-8', use -C <charset> to override Info: using DVB adapter auto detection. /dev/dvb/adapter0/frontend0 -> TERRESTRIAL "NXP TDA10048HN DVB-T": good :-) Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0) -_-_-_-_ Getting frontend capabilities-_-_-_-_ Using DVB API 5.10 frontend 'NXP TDA10048HN DVB-T' supports INVERSION_AUTO QAM_AUTO TRANSMISSION_MODE_AUTO GUARD_INTERVAL_AUTO HIERARCHY_AUTO FEC_AUTO FREQ (177.00MHz ... 858.00MHz)
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!woran kann das liegen ?
mfg
Auch hier:
Bitte Code-Tags benutzen -
nachtrag
2.rechner : neuer versuch
1. versuch:
windows cd einlegen reparatur system anklicken und neustart
kein windows 7 im bootmenue2. versuch:
- menuentry "Windows 7" {
- insmod part_msdos
- insmod ntfs
- set root='(hd0,msdos1)'
- chainloader +1
- }
in /etc/grub.d/40_custom rein und rebbot
im menue wird windo... angezeigtinstallations cd windo... rein und reparatur system anklicken.
rebootund die partition wird beim anklicken von windo.. erkannt und alles geht.
mfg
-
hi
alles versucht und immer gegen eine wand gelaufen.
ich denke mal ich ziehe hier einen strich und gebs auf.
werd das ganze auf eine 2. platte neu installieren und
das dopplelsystem aufgeben.herzlichen dank fuer die hilfe