hallo und nabend @all
ich habe das problem, dass weder kaffeine noch me tv mein tvb t stick erkennt.
zunächst mal die hard/software-infos:
notebook hp nx 9420
cpu intel t2400 (2 kerne)
grka x1600 mobility radeon
ram 3 gb
suse 11.2 32bit (aktueller patchstand)
kernel 2.6.31.5-0.1-desktop i686
kde 4.3.1 release 6
dvb t stick - pinnacle hyprid pro 330e
der stick wird vom system richtig erkannt, dennoch findet kaffeine und me tv keine geräte.
hier mal die meldung von lsusb und gmesg:
lsusb
Code
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 2304:0226 Pinnacle Systems, Inc. [hex] PCTV 330e
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:00a4 Microsoft Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg
Code
[ 2427.398596] em28xx: New device Pinnacle Systems PCTV 330e @ 480 Mbps (2304:0226, interface 0, class 0)
[ 2427.398845] em28xx #0: chip ID is em2882/em2883
[ 2427.528180] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
[ 2427.528237] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[ 2427.528282] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[ 2427.528328] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[ 2427.528373] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2427.528424] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2427.528468] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[ 2427.528514] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 2427.528559] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[ 2427.528604] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
[ 2427.528649] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 39 00 30 00
[ 2427.528694] em28xx #0: i2c eeprom b0: 31 00 30 00 39 00 33 00 33 00 35 00 36 00 00 00
[ 2427.528739] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2427.528784] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2427.528829] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2427.528874] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2427.528922] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x3bb3abbf
[ 2427.528938] em28xx #0: EEPROM info:
[ 2427.528949] em28xx #0: AC97 audio (5 sample rates)
[ 2427.528963] em28xx #0: 500mA max power
[ 2427.528976] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[ 2427.530468] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
[ 2427.533875] tvp5150 0-005c: chip found @ 0xb8 (em28xx #0)
[ 2427.539735] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[ 2427.539970] xc2028 0-0061: creating new instance
[ 2427.539987] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 2427.540044] usb 1-6: firmware: requesting xc3028-v27.fw
[ 2427.551039] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 2427.584056] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 2428.448560] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700.
[ 2428.462556] SCODE (20000000), id 000000000000b700:
[ 2428.462577] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 2428.622186] em28xx #0: Config register raw data: 0xd0
[ 2428.622921] em28xx #0: AC97 vendor ID = 0xffffffff
[ 2428.623679] em28xx #0: AC97 features = 0x6a90
[ 2428.623695] em28xx #0: Empia 202 AC97 audio processor detected
[ 2428.702429] tvp5150 0-005c: tvp5150am1 detected.
[ 2428.791932] em28xx #0: v4l2 driver version 0.1.2
[ 2428.843125] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 2428.843146] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 2428.843162] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 2428.966785] zl10353_read_register: readreg error (reg=127, ret==-19)
[ 2428.967657] mt352_read_register: readreg error (reg=127, ret==-19)
[ 2428.967776] em28xx #0/2: dvb frontend not attached. Can't attach xc3028
Alles anzeigen
leider kann ich die meldung von dmesg nicht ganz für mich übersetzen.
vielleicht sieht einer von euch hier noch einen fehler, wo ich ansetzen kann.
schon mal vielen dank und gruß rc2.d