Konsolen-Ausgabe von "dmesg|tail -n 20":
Code
[ 1367.743897] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1367.743900] usb 3-2: Product: CP2102 USB to UART Bridge Controller
[ 1367.743903] usb 3-2: Manufacturer: Silicon Labs
[ 1367.743909] usb 3-2: SerialNumber: 0001
[ 1367.745073] cp210x 3-2:1.0: cp210x converter detected
[ 1367.745239] usb 3-2: cp210x converter now attached to ttyUSB0
[ 2492.130214] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=20:1a:06:d1:39:fa:e0:28:6d:65:f1:08:08:00 SRC=192.168.178.1 DST=192.168.178.26 LEN=334 TOS=0x00 PREC=0x00 TTL=64 ID=64831 PROTO=UDP SPT=1900 DPT=40164 LEN=314
[ 2863.618797] BTRFS info (device sda2): qgroup scan completed (inconsistency flag cleared)
[ 3989.721858] usb 3-2: USB disconnect, device number 4
[ 3989.722137] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[ 3989.722170] cp210x 3-2:1.0: device disconnected
[ 3995.817422] usb 3-2: new full-speed USB device number 5 using xhci_hcd
[ 3995.947178] usb 3-2: New USB device found, idVendor=10c4, idProduct=ea60
[ 3995.947185] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3995.947188] usb 3-2: Product: CP2102 USB to UART Bridge Controller
[ 3995.947190] usb 3-2: Manufacturer: Silicon Labs
[ 3995.947192] usb 3-2: SerialNumber: 0001
[ 3995.948077] cp210x 3-2:1.0: cp210x converter detected
[ 3995.948236] usb 3-2: cp210x converter now attached to ttyUSB0
[ 4147.933470] perf interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Alles anzeigen
Es handelt sich also um dev/ttyUSB0. Aber damit habe ich schon ohne Erfolg probiert: Bei putty: Unable to open serial port, und bei cutecom: access denied