ich habe ein gebrauchtes Notebook g550 geschenkt bekommen. Das lief unter Windows am WLAN.
Ich habe jetzt leap 15 installiert und kriege das Gerät nur mit Draht ins Internet.
Ich habe packman und die broadcom-Treiber installiert und die netzkarte wird erkannt, das Gerät findet die drahtlosen netze aber kann sich nicht verbinden.
Code
linux-w5fn:~ # hwinfo --wlan
14: PCI 400.0: 0282 WLAN controller
[Created at pci.378]
Unique ID: y9sn.2XuLWNuSTT1
Parent ID: hoOk.VCkrGaDpsg8
SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:04:00.0
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Broadcom BCM4312 802.11b/g LP-PHY"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4315 "BCM4312 802.11b/g LP-PHY"
SubVendor: pci 0x14e4 "Broadcom"
SubDevice: pci 0x04b5
Revision: 0x01
Driver: "wl"
Driver Modules: "wl"
Device File: wlan0
Features: WLAN
Memory Range: 0xf4500000-0xf4503fff (rw,non-prefetchable)
IRQ: 18 (no events)
HW Address: 6e:31:7e:e5:51:62
Permanent HW Address: c4:17:fe:f9:a2:5b
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36 38 40 42 44 46 48 52 56 60 64 100 104 108 112 116 120 124
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 5.18 5.19 5.2 5.21 5.22 5.23 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d00004315sv000014E4sd000004B5bc02sc80i00"
Driver Info #0:
Driver Status: ssb is not active
Driver Activation Cmd: "modprobe ssb"
Driver Info #1:
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
Alles anzeigen
was kann ich tun?