WLAN Karte einschalten

Hinweis: In dem Thema WLAN Karte einschalten gibt es 17 Antworten auf 2 Seiten. Der letzte Beitrag () befindet sich auf der letzten Seite.
  • Hallo Gemeinde,


    heute melde ich mich mit einem neuen Problem. Kann mir jemand auf die Sprünge helfen, wie man beim Acer TravelMate 5735Z die WLAN Karte einschaltet ? Im Auslieferzustand wurde sie mittels FN + F3 eingeschaltet. Gibt es da ggf. einen Treiber, der diese Funktionen freigibt? Oder kann man die Karte auch so scharf machen ?


    Für Eure Hilfe wäre ich dankbar.


    Gruß Poseidon :whistling: ?( ?( ?(

  • @ Sauerland


    So, habe das Script jetzt laufen lassen und habe die Textdatei vorliegen. An welche Adresse muss ich die Datei nun posten, damit sich ein Profi das mal ansehen kann ??????


    Dank Dir schon mal im voraus.


    Gruß Poseidon


    PS. mit Kabel klapt´s nur der WLAN Bereich spiel nicht mit.
    :thumbup: :thumbup: :thumbup:

  • Hi
    Den Inhalt der Textdatei einfach per Copy&Paste in Code-Tags (# Zeichen)
    Posten.

    Für den Inhalt des Beitrages 30118 haftet ausdrücklich der jeweilige Autor: D_Dau

  • Dann versuch ich es mal:


    collectNWData.sh V0.6.5.4.2_i1 (Rev: 1.283, Build: 2011/03/03 21:14:38 UTC)
    --- Which type of your network connection should be tested?
    --- (2) Wireless connection (WLAN)
    --- What's the type of networktopology?
    --- (2) WLAN HW router <---> LinuxClient
    --- On which host is the script executed?
    --- (1) LinuxClient



    --- NWEliza is analyzing the system for common network configuration errors ...


    !!! CND0240E: knetworkmanager for network configuration enabled but a YAST network card configuration for wlan0,eth0 exist


    --- Go to http://www.linux-tips-and-tricks.de/CND to get more detailed instructions
    --- about the error/warning messages and how to fix the problems on your own.


    --- If you are unsuccessful then place the contents of file collectNWData.txt in the net
    --- (see http://www.linux-tips-and-tricks.de/CND_UPL for links)
    --- and then paste the nopaste link on your favorite Linux forum.


    ==================================================================================================================
    ===== cat /etc/*[-_]release || cat /etc/*[-_]version =============================================================
    /etc/SuSE-release
    openSUSE 11.4 (i586)
    VERSION = 11.4
    CODENAME = Celadon
    ===== uname -a ===================================================================================================
    Linux linux-03k1 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 i686 i386 GNU/Linux
    ===== lspci ======================================================================================================
    04:00.0 Network controller [0280]: Broadcom Corporation BCM43225 802.11b/g/n [14e4:4357] (rev 01)
    Subsystem: Foxconn International, Inc. Device [105b:e021]
    05:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
    Subsystem: Acer Incorporated [ALI] Device [1025:0139]
    Kernel driver in use: tg3
    ===== find /lib/modules/`uname -r` -name "*.ko" ==================================================================
    Available kernelmodules for VendorId:DeviceId - 14e4:4357
    Module: brcm80211
    ===== lsusb | grep -v "root hub" =================================================================================
    Bus 002 Device 002: ID 064e:a219 Suyin Corp.
    Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.
    ===== hwinfo (filtered) ==========================================================================================
    27: PCI 400.0: 0280 Network controller
    Model: "Broadcom Network controller"
    Vendor: pci 0x14e4 "Broadcom"
    Device: pci 0x4357
    SubVendor: pci 0x105b "Foxconn International, Inc."
    SubDevice: pci 0xe021
    Driver Status: brcm80211 is active
    Driver Activation Cmd: "modprobe brcm80211"
    28: PCI 500.0: 0200 Ethernet controller
    Model: "Broadcom NetLink BCM57780 Gigabit Ethernet PCIe"
    Vendor: pci 0x14e4 "Broadcom"
    Device: pci 0x1692 "NetLink BCM57780 Gigabit Ethernet PCIe"
    SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
    SubDevice: pci 0x0139
    Driver: "tg3"
    Driver Modules: "tg3"
    Device File: eth0
    Link detected: no
    Driver Status: tg3 is active
    Driver Activation Cmd: "modprobe tg3"
    ===== lsmod (filtered) ===========================================================================================
    | ac | brcm80211 | cfg80211 | drm | drm_kms_helper |
    | i2c_algo_bit | i2c_i801 | i915 | jbd2 | mac80211 |
    | mperf | pci_hotplug | rfkill | sg | shpchp |
    | sr_mod | tg3 | v4l1_compat | wmi |
    ===== ls /lib/firmware/* =========================================================================================
    | 2.6.37.1-1.2-desktop | 3CCFEM556.cis | 3CXEM556.cis | amd-ucode |
    | b43 | b43legacy | COMpad2.cis | COMpad4.cis |
    | DP83903.cis | E-CARD.cis | LA-PCM.cis | microcode.dat |
    | MT5634ZLX.cis | NE2K.cis | PCMLM28.cis | PE-200.cis |
    | PE520.cis | RS-COM-2P.cis | tamarack.cis |
    --- /lib/firmware
    ===== ifconfig (filtered for eth|wlan|ra|ath|dsl) ================================================================
    eth0 Link encap:Ethernet Hardware Adresse ##:##:##:##:##:#1
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 Sendewarteschlangenlänge:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:18
    ===== iwconfig ===================================================================================================
    lo no wireless extensions.
    eth0 no wireless extensions.
    ===== cat /etc/sysconfig/network/ifcfg-[earwd]* | grep -v "=''" ==================================================
    --- /etc/sysconfig/network/ifcfg-eth0
    BOOTPROTO='dhcp'
    MTU='1492'
    NAME='NetLink BCM57780 Gigabit Ethernet PCIe'
    STARTMODE='auto'
    USERCONTROL='no'
    --- /etc/sysconfig/network/ifcfg-wlan0
    BOOTPROTO='dhcp'
    STARTMODE='auto'
    USERCONTROL='no'
    WIRELESS_AP_SCANMODE='1'
    WIRELESS_AUTH_MODE='psk'
    WIRELESS_BITRATE='auto'
    WIRELESS_DEFAULT_KEY='0'
    WIRELESS_ESSID='§§§§§§§§1'
    WIRELESS_KEY_LENGTH='@@@@@@'
    WIRELESS_MODE='Managed'
    WIRELESS_POWER='yes'
    WIRELESS_WPA_PSK='@@@@@@'
    ===== iwlist scanning ============================================================================================
    No WLANs found
    ===== ndiswrapper -l =============================================================================================
    No ndiswrapper module loaded
    ===== Active processes ===========================================================================================
    wpa_supplicant:YES knetworkmanager:YES nm-applet:NO
    ===== ===== egrep -i "persistent|networkmanager" /etc/sysconfig/network/config | grep -v "^#|^$" =================
    NETWORKMANAGER="yes"
    ===== dhcpcd-test ================================================================================================
    ===== ping tests =================================================================================================
    connect: Network is unreachable
    Ping of 195.135.220.3 failed
    ping: unknown host http://www.suse.de
    Ping of http://www.suse.de failed
    ===== cat /etc/resolv | grep -i "nameserver" =====================================================================
    ===== cat /etc/hosts =============================================================================================
    127.0.0.1 localhost
    ===== route -n | egrep "(eth|ath|ra|wlan|dsl)" ===================================================================
    ===== Actual date for bias of following greps ====================================================================
    17:36:48 2011-04-05
    ===== grep -i radio /var/log/messages* | tail -n 5 ===============================================================
    Apr 4 21:01:00 linux-03k1 NetworkManager[1416]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Apr 4 21:08:18 linux-03k1 NetworkManager[1230]: <info> WiFi enabled by radio killswitch; enabled by state file
    Apr 4 21:08:18 linux-03k1 NetworkManager[1230]: <info> WWAN enabled by radio killswitch; enabled by state file
    Apr 4 21:08:18 linux-03k1 NetworkManager[1230]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Apr 4 21:10:50 linux-03k1 NetworkManager[1200]: <info> WiFi enabled by radio killswitch; enabled by state file
    Apr 4 21:10:50 linux-03k1 NetworkManager[1200]: <info> WWAN enabled by radio killswitch; enabled by state file
    Apr 4 21:10:50 linux-03k1 NetworkManager[1200]: <info> WiMAX enabled by radio killswitch; enabled by state file
    Apr 5 17:31:57 linux-03k1 NetworkManager[1188]: <info> WiFi enabled by radio killswitch; enabled by state file
    Apr 5 17:31:57 linux-03k1 NetworkManager[1188]: <info> WWAN enabled by radio killswitch; enabled by state file
    Apr 5 17:31:57 linux-03k1 NetworkManager[1188]: <info> WiMAX enabled by radio killswitch; enabled by state file
    ===== dmesg | grep -i radio | tail -n 5 ==========================================================================
    ===== tail -n 300 /var/log/messages* | /usr/bin/grep -i firmware | tail -n 10 ====================================
    Apr 4 21:10:49 linux-03k1 NetworkManager[1200]: <info> monitoring kernel firmware directory '/lib/firmware'.
    Apr 5 17:31:57 linux-03k1 NetworkManager[1188]: <info> monitoring kernel firmware directory '/lib/firmware'.
    ===== egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent* /etc/udev/rules.d/*persistent-net* ==============
    /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="##:##:##:##:##:#1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
    ===== egrep -r 'eth[0-10]|ath[0-10]|wlan[0-10]|ra[0-10]' /etc/modprobe.*|egrep -v -i '#|backlist' ================
    ==================================================================================================================
    *** NWElizaStates V0.6.5.4.2_i1
    IF:eth0 IM:1 DI:1 AP:0 FALON:1 NI:1 cNI:1 NDIS:0 CM:0 IP6:0 KM:1 WLW:0 RTDT:SuSE

  • Deine WLAN-Karte

    Zitat

    04:00.0 Network controller [0280]: Broadcom Corporation BCM43225 802.11b/g/n [14e4:4357]


    sollte mit dem geladenen Treiber

    Zitat

    Driver Status: brcm80211 is active


    Eigentlich tadellos Funktionieren.
    Es liegt bei dir wohl eher ein Fehler in der Konfiguration vor

    Zitat

    !!! CND0240E: knetworkmanager for network configuration enabled but a YAST network card configuration for wlan0,eth0 exist


    Wie hast du dein WLAN Eingerichtet?
    Über Yast oder Knetworkmanager?

    Für den Inhalt des Beitrages 30121 haftet ausdrücklich der jeweilige Autor: D_Dau

  • Ich habe von jedem etwas gemacht. Manuell habe ich mal versucht das eine oder andere zu machen, wenn ich den Manager einschalte, so lässt er mich nur noch an die LAN Bereich, WLAN ist invers dargestellt. Also um nochmal auf den Punkt zu kommen, was muss ich nun machen ??????


    Vielen lieben Dank schon mal für Deine Hilfe.


    LG Poseidon

  • Entweder nutzt du Yast oder Knetworkmanager.Beides zusammen führt zu Problemen.
    Lösche also am besten die Konfiguration in Yast und Versuche es mit dem
    Knetworkmanager noch mal von Neuem.
    Oder Umgekehrt.
    Ich selber bevorzuge hierzu lieber Yast,aber der Knetworkmanager ist
    gerade für Anfänger besser zu Handhaben.

    Für den Inhalt des Beitrages 30124 haftet ausdrücklich der jeweilige Autor: D_Dau

  • Hallo,


    habe mich für den Manager entschieden. In Yast habe ich alles rausgelöscht. System neu gestartet, wenn ich jetzt in den Manager gehe, wird mir nur wieder die LAN Verbindung angeboten, VPN und DSL sind anwählbar. Der Bereich Drahtlos sowie Mobil-Breitband sind invers, da lässt mich das System nicht dran. Muss ich ggf. noch irgendwo was aufmachen ?? Habe auch mal den Firefox gestartet, aber da tut sich noch nichts. Irgendwo habe ich da noch einen Hänger, nur wo ??


    Gruss Poseidon