HP OfficeJet PRO 8710 scannt nicht

Serbmem · 13. November 2022

Code

markus@linux:~> su
Passwort: 
linux:/home/markus # hp-setup -i 192.168.178.25

HP Linux Imaging and Printing System (ver. 3.21.10)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


Setting up device: hp:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25



---------------------
| PRINT QUEUE SETUP |
---------------------


Please enter a name for this print queue (m=use model name:'HP_OfficeJet_Pro_8710_3'*, q=quit) ?HP_OfficeJet_Pro_8710
error: A print queue with that name already exists. Please enter a different name.

Please enter a name for this print queue (m=use model name:'HP_OfficeJet_Pro_8710_3'*, q=quit) ?q
OK, done.
linux:/home/markus # hp-setup -i 192.168.178.25

HP Linux Imaging and Printing System (ver. 3.21.10)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)


Setting up device: hp:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25



---------------------
| PRINT QUEUE SETUP |
---------------------


Please enter a name for this print queue (m=use model name:'HP_OfficeJet_Pro_8710_3'*, q=quit) ?m
Using queue name: HP_OfficeJet_Pro_8710_3
Locating PPD file... Please wait.

Found PPD file: /usr/share/cups/model/manufacturer-PPDs/hplip/hp-officejet_pro_8710.ppd.gz
Description: 

Note: The model number may vary slightly from the actual model number on the device.

Does this PPD file appear to be the correct one (y=yes*, n=no, q=quit) ? y
Enter a location description for this printer (q=quit) ?near telefon
Enter additonal information or notes for this printer (q=quit) ?on the desk

Adding print queue to CUPS:
Device URI: hp:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25
Queue name: HP_OfficeJet_Pro_8710_3
PPD file: /usr/share/cups/model/manufacturer-PPDs/hplip/hp-officejet_pro_8710.ppd.gz
Location: near telefon
Information: on the desk


-------------------
| FAX QUEUE SETUP |
-------------------


Please enter a name for this fax queue (m=use model name:'HP_OfficeJet_Pro_8710_fax_3'*, q=quit) ?m
Using queue name: HP_OfficeJet_Pro_8710_fax_3
Enter a location description for this printer (q=quit) ?near telefon
Enter additonal information or notes for this printer (q=quit) ?on the desk

Adding fax queue to CUPS:
Device URI: hpfax:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25
Queue name: HP_OfficeJet_Pro_8710_fax_3
PPD file: /usr/share/cups/model/manufacturer-PPDs/hplip/HP-Fax4-hpcups.ppd.gz
Location: near telefon
Information: on the desk

--------------------
| FAX HEADER SETUP |
--------------------


Would you like to perform fax header setup (y=yes*, n=no, q=quit) ?y

Enter the fax phone number for this device (c=use current:'25823069250'*, q=quit) ?025823069250

Enter the name and/or company for this device (c=use current:'Markus Neuhaus'*, q=quit) ?c

Parameters sent to device.

---------------------
| PRINTER TEST PAGE |
---------------------


Would you like to print a test page (y=yes*, n=no, q=quit) ? y
warning: hp-testpage should not be run as root/superuser.

HP Linux Imaging and Printing System (ver. 3.21.10)
Testpage Print Utility ver. 6.0

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Printing test page to printer HP_OfficeJet_Pro_8710_3...
Test page has been sent to printer.

note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.


Done.

Done.
linux:/home/markus #

Alles anzeigen

Sauerland · 14. November 2022

Was sagt als User:

Code

scanimage -L

bzw. auch als root.

Was sagt :

grep -i hpaio /etc/sane.d/*

Sauerland · 14. November 2022

SANE/Scanner-specific problems - ArchWiki

Serbmem · 14. November 2022

Code

markus@linux:~> scanimage
Output format is not set, using pnm as a default.
scanimage: output is not a file, exiting
markus@linux:~>

Kann man Dateien mit der pnm Erweiterung auch per Mail an einen Windowsrechner schicken und kann der Empfänger das auch lesen? Ich habe die Dateien noch odg geändert.

Sauerland · 14. November 2022

Zitat von Serbmem
Code
markus@linux:~> scanimage
Output format is not set, using pnm as a default.
scanimage: output is not a file, exiting
markus@linux:~> 
Kann man Dateien mit der pnm Erweiterung auch per Mail an einen Windowsrechner schicken und kann der Empfänger das auch lesen? Ich habe die Dateien noch odg geändert.

Mein Befehl lautete aber anders.......

Serbmem · 14. November 2022

Code

markus@linux:~> scanimage -l
Output format is not set, using pnm as a default.
scanimage: option requires an argument -- 'l'
markus@linux:~> scanimage -- l
Output format is not set, using pnm as a default.
scanimage: argument without option: `l'; try scanimage --help
markus@linux:~> scanimage --help
Usage: scanimage [OPTION]...

Start image acquisition on a scanner device and write image data to
standard output.

Parameters are separated by a blank from single-character options (e.g.
-d epson) and by a "=" from multi-character options (e.g. --device-name=epson).
-d, --device-name=DEVICE   use a given scanner device (e.g. hp:/dev/scanner)
    --format=pnm|tiff|png|jpeg  file format of output file
-i, --icc-profile=PROFILE  include this ICC profile into TIFF file
-L, --list-devices         show available scanner devices
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output
                           can be specified: %d (device name), %v (vendor),
                           %m (model), %t (type), %i (index number), and
                           %n (newline)
-b, --batch[=FORMAT]       working in batch mode, FORMAT is `out%d.pnm' `out%d.tif'
                           `out%d.png' or `out%d.jpg' by default depending on --format
                           This option is incompatible with --output-file.    --batch-start=#        page number to start naming files with
    --batch-count=#        how many pages to scan in batch mode
    --batch-increment=#    increase page number in filename by #
    --batch-double         increment page number by two, same as
                           --batch-increment=2
    --batch-print          print image filenames to stdout
    --batch-prompt         ask for pressing a key before scanning a page
    --accept-md5-only      only accept authorization requests using md5
-p, --progress             print progress messages
-o, --output-file=PATH     save output to the given file instead of stdout.
                           This option is incompatible with --batch.
-n, --dont-scan            only set options, don't actually scan
-T, --test                 test backend thoroughly
-A, --all-options          list all available backend options
-h, --help                 display this help message and exit
-v, --verbose              give even more status messages
-B, --buffer-size=#        change input buffer size (in kB, default 32)
-V, --version              print version information
Output format is not set, using pnm as a default.

Options specific to device `hpaio:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25':
  Scan mode:
    --mode Lineart|Gray|Color [Lineart]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --resolution 75|100|200|300dpi [75]
        Sets the resolution of the scanned image.
    --source Flatbed|ADF|Duplex [Flatbed]
        Selects the scan source (such as a document-feeder).
  Advanced:
    --brightness 0..2000 [1000]
        Controls the brightness of the acquired image.
    --contrast 0..2000 [1000]
        Controls the contrast of the acquired image.
    --compression JPEG [JPEG]
        Selects the scanner compression method for faster scans, possibly at
        the expense of image quality.
    --jpeg-quality 0..100 [inactive]
        Sets the scanner JPEG compression factor. Larger numbers mean better
        compression, and smaller numbers mean better image quality.
  Geometry:
    -l 0..215.9mm [0]
        Top-left x position of scan area.
    -t 0..297.011mm [0]
        Top-left y position of scan area.
    -x 0..215.9mm [215.9]
        Width of scan-area.
    -y 0..297.011mm [297.011]
        Height of scan-area.

Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.

List of available devices:
    hpaio:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25
markus@linux:~>

Alles anzeigen

Serbmem · 14. November 2022

Code

markus@linux:~> grep-l hpaio/etc/sane.d/*
Wenn 'grep-l' kein Tippfehler ist, können Sie command-not-found benutzen, um das Paket zu finden, das den Befehl enthält, z. B.:
    cnf grep-l
markus@linux:~> grep-I hpaio/etc/sane.d/*
Wenn 'grep-I' kein Tippfehler ist, können Sie command-not-found benutzen, um das Paket zu finden, das den Befehl enthält, z. B.:
    cnf grep-I
markus@linux:~> grep -i hpaio/etc/sane.d/*
      

markus@linux:~> grep-i hpaio/etc/sane.d/*
markus@linux:~> grep-i hpaio/etc/sane.d/*

Alles anzeigen

Sauerland · 14. November 2022

Zitat von Serbmem

Code

markus@linux:~> scanimage -l
Output format is not set, using pnm as a default.
scanimage: option requires an argument -- 'l'
markus@linux:~> scanimage -- l
Output format is not set, using pnm as a default.
scanimage: argument without option: `l'; try scanimage --help
markus@linux:~> scanimage --help
Usage: scanimage [OPTION]...

Start image acquisition on a scanner device and write image data to
standard output.

Parameters are separated by a blank from single-character options (e.g.
-d epson) and by a "=" from multi-character options (e.g. --device-name=epson).
-d, --device-name=DEVICE   use a given scanner device (e.g. hp:/dev/scanner)
    --format=pnm|tiff|png|jpeg  file format of output file
-i, --icc-profile=PROFILE  include this ICC profile into TIFF file
-L, --list-devices         show available scanner devices
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output
                           can be specified: %d (device name), %v (vendor),
                           %m (model), %t (type), %i (index number), and
                           %n (newline)
-b, --batch[=FORMAT]       working in batch mode, FORMAT is `out%d.pnm' `out%d.tif'
                           `out%d.png' or `out%d.jpg' by default depending on --format
                           This option is incompatible with --output-file.    --batch-start=#        page number to start naming files with
    --batch-count=#        how many pages to scan in batch mode
    --batch-increment=#    increase page number in filename by #
    --batch-double         increment page number by two, same as
                           --batch-increment=2
    --batch-print          print image filenames to stdout
    --batch-prompt         ask for pressing a key before scanning a page
    --accept-md5-only      only accept authorization requests using md5
-p, --progress             print progress messages
-o, --output-file=PATH     save output to the given file instead of stdout.
                           This option is incompatible with --batch.
-n, --dont-scan            only set options, don't actually scan
-T, --test                 test backend thoroughly
-A, --all-options          list all available backend options
-h, --help                 display this help message and exit
-v, --verbose              give even more status messages
-B, --buffer-size=#        change input buffer size (in kB, default 32)
-V, --version              print version information
Output format is not set, using pnm as a default.

Options specific to device `hpaio:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25':
  Scan mode:
    --mode Lineart|Gray|Color [Lineart]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --resolution 75|100|200|300dpi [75]
        Sets the resolution of the scanned image.
    --source Flatbed|ADF|Duplex [Flatbed]
        Selects the scan source (such as a document-feeder).
  Advanced:
    --brightness 0..2000 [1000]
        Controls the brightness of the acquired image.
    --contrast 0..2000 [1000]
        Controls the contrast of the acquired image.
    --compression JPEG [JPEG]
        Selects the scanner compression method for faster scans, possibly at
        the expense of image quality.
    --jpeg-quality 0..100 [inactive]
        Sets the scanner JPEG compression factor. Larger numbers mean better
        compression, and smaller numbers mean better image quality.
  Geometry:
    -l 0..215.9mm [0]
        Top-left x position of scan area.
    -t 0..297.011mm [0]
        Top-left y position of scan area.
    -x 0..215.9mm [215.9]
        Width of scan-area.
    -y 0..297.011mm [297.011]
        Height of scan-area.

Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.

List of available devices:
    hpaio:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25
markus@linux:~>

Alles anzeigen

Du liest nicht richtig, l ist nicht L.........

Code

scanimage -L

Sauerland · 14. November 2022

Mach am besten copy/paste, erspart Tippfehler......

Zitat

markus@linux:~> grep-i hpaio/etc/sane.d/*

wäre richtigerweise:

Code

grep -i hpaio /etc/sane.d/*

Man beachte das Leerzeichen nach hpaio

Serbmem · 14. November 2022

Code

markus@linux:~> scanimage -L
device `hpaio:/net/HP_OfficeJet_Pro_8710?ip=192.168.178.25' is a Hewlett-Packard HP_OfficeJet_Pro_8710 all-in-one
markus@linux:~>

HP OfficeJet PRO 8710 scannt nicht

Ubuntu 26.10 „Stonking Stingray“ ist erschienen

Tumbleweed-Update bricht ab

KDE Plasma 6.8 verabschiedet sich von X11

VBox - gemeinsame Zwischenablage

Linux-Kernel: Kennzeichnungspflicht für KI-generierten Code soll entfallen

k.113

BlackPhoenix

aitexturegenerator

Giorgio68

pavelstr

Teilen