TW nach system-update Bildschirmgrafik 1024x768

su_lin_user · 25. September 2025

Hallo Sauerland,

Zitat

Und ich hoffe auch, das kein wayland läuft.

Nein, Arbeitsflächensitzung X11.

Zitat von Sauerland
Achso und vergessen, poste:
Code
inxi -Ga

Code

tumb1@Tuxedo2020:~> inxi -Ga
Graphics:
  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: Micro-Star MSI
    driver: N/A alternate: nouveau non-free: 550-580.xx+ status: current (as of
    2025-08; EOL~2026-12-xx) arch: Pascal code: GP10x process: TSMC 16nm
    built: 2016-2021 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3
    speed: 8 GT/s bus-ID: 06:00.0 chip-ID: 10de:1c82 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.15 with: Xwayland v: 24.1.8
    compositor: kwin_x11 driver: X: loaded: modesetting unloaded: vesa
    failed: nvidia alternate: fbdev,nouveau,nv gpu: N/A display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.63x7.99")
    s-diag: 338mm (13.3")
  Monitor-1: Unknown-1 mapped: None-1 res: mode: 1024x768 hz: 60
    scale: 100% (1) size: N/A modes: 1024x768
  API: EGL v: 1.5 platforms: device: 0 drv: swrast surfaceless: drv: swrast
    x11: drv: swrast inactive: gbm,wayland
  API: OpenGL v: 4.5 vendor: mesa v: 25.2.2 glx-v: 1.4 direct-render: yes
    renderer: llvmpipe (LLVM 21.1.1 256 bits) device-ID: ffffffff:ffffffff
    memory: 15.2 GiB unified: yes
  API: Vulkan v: 1.4.321 layers: 3 device: 0 type: cpu name: llvmpipe (LLVM
    21.1.1 256 bits) driver: mesa llvmpipe v: 25.2.2 (LLVM 21.1.1)
    device-ID: 10005:0000 surfaces: N/A
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
    de: kscreen-console,kscreen-doctor gpu: nvidia-smi wl: wayland-info
    x11: xdpyinfo, xprop, xrandr

Alles anzeigen

Wenn der Bildschirm bei Nichtbenutzung automatisch abschaltet, kann man ihn nicht mehr zurückholen. Die einzige Möglichkeit ist neu booten.

Sauerland · 25. September 2025

Was sagt:

Code

mokutil --sb-state

su_lin_user · 25. September 2025

Zitat von Sauerland
Was sagt:
Code
mokutil --sb-state

Code

tumb1@Tuxedo2020:~> mokutil --sb-state
SecureBoot disabled
Platform is in Setup Mode

Sauerland · 25. September 2025

Poste:

Code

cat /var/log/Xorg.0.log

und als root:

Code

journalctl -b | grep -Ei 'nvidia|error'

su_lin_user · 25. September 2025

Zitat von Sauerland
Poste:
Code
cat /var/log/Xorg.0.log
und als root:
Code
journalctl -b | grep -Ei 'nvidia|error'

Code

tumb1@Tuxedo2020:~> cat /var/log/Xorg.0.log
[   104.980] (--) Log file renamed from "/var/log/Xorg.pid-1524.log" to "/var/log/Xorg.0.log"
[   104.981] 
X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
[   104.981] Current Operating System: Linux localhost.localdomain 6.16.7-1-default #1 SMP PREEMPT_DYNAMIC Fri Sep 12 07:00:22 UTC 2025 (4e78a24) x86_64
[   104.981] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.16.7-1-default root=UUID=344475b2-4c3b-4ae0-9699-51eb1d105208 splash=silent mitigations=auto quiet security=selinux selinux=1
[   104.981]  
[   104.981] Current version of pixman: 0.46.2
[   104.981]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   104.981] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   104.981] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 25 20:20:42 2025
[   104.982] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   104.982] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   104.984] (==) No Layout section.  Using the first Screen section.
[   104.984] (==) No screen section available. Using defaults.
[   104.984] (**) |-->Screen "Default Screen Section" (0)
[   104.984] (**) |   |-->Monitor "<default monitor>"
[   104.984] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   104.984] (**) Allowing byte-swapped clients
[   104.984] (==) Automatically adding devices
[   104.984] (==) Automatically enabling devices
[   104.984] (==) Automatically adding GPU devices
[   104.984] (==) Automatically binding GPU devices
[   104.984] (==) Max clients allowed: 512, resource mask: 0xfffff
[   104.986] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[   104.986]    Entry deleted from font path.
[   104.986] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[   104.986] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   104.986] (WW) Ignoring unrecognized extension "XFree86-DGA"
[   104.986] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   104.986] (II) Loader magic: 0x55b5a48fbac0
[   104.986] (II) Module ABI versions:
[   104.986]    X.Org ANSI C Emulation: 0.4
[   104.986]    X.Org Video Driver: 25.2
[   104.986]    X.Org XInput driver : 24.4
[   104.986]    X.Org Server Extension : 10.0
[   104.987] (++) using VT number 2

[   104.987] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   104.988] (II) xfree86: Adding drm device (/dev/dri/card0)
[   104.988] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:06:00.0/simple-framebuffer.0/drm/card0
[   104.994] (--) PCI:*(6@0:0:0) 10de:1c82:1462:8c96 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[   104.994] (II) LoadModule: "glx"
[   104.995] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   105.000] (II) Module glx: vendor="X.Org Foundation"
[   105.000]    compiled for 1.21.1.15, module version = 1.0.0
[   105.000]    ABI class: X.Org Server Extension, version 10.0
[   105.000] (II) Scanning /usr/share/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[   105.001] (II) Scanning /usr/share/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[   105.001] (==) Matched nvidia as autoconfigured driver 0
[   105.001] (==) Matched nouveau as autoconfigured driver 1
[   105.001] (==) Matched nv as autoconfigured driver 2
[   105.001] (==) Matched modesetting as autoconfigured driver 3
[   105.001] (==) Matched fbdev as autoconfigured driver 4
[   105.001] (==) Matched vesa as autoconfigured driver 5
[   105.001] (==) Assigned the driver to the xf86ConfigLayout
[   105.001] (II) LoadModule: "nvidia"
[   105.001] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[   105.009] (II) Module nvidia: vendor="NVIDIA Corporation"
[   105.009]    compiled for 1.6.99.901, module version = 1.0.0
[   105.009]    Module class: X.Org Video Driver
[   105.009] (II) LoadModule: "nouveau"
[   105.010] (WW) Warning, couldn't open module nouveau
[   105.010] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   105.010] (II) LoadModule: "nv"
[   105.010] (WW) Warning, couldn't open module nv
[   105.010] (EE) Failed to load module "nv" (module does not exist, 0)
[   105.010] (II) LoadModule: "modesetting"
[   105.010] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[   105.010] (II) Module modesetting: vendor="X.Org Foundation"
[   105.010]    compiled for 1.21.1.15, module version = 1.21.1
[   105.010]    Module class: X.Org Video Driver
[   105.010]    ABI class: X.Org Video Driver, version 25.2
[   105.010] (II) LoadModule: "fbdev"
[   105.010] (WW) Warning, couldn't open module fbdev
[   105.010] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   105.010] (II) LoadModule: "vesa"
[   105.010] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[   105.011] (II) Module vesa: vendor="X.Org Foundation"
[   105.011]    compiled for 1.21.1.15, module version = 2.6.0
[   105.011]    Module class: X.Org Video Driver
[   105.011]    ABI class: X.Org Video Driver, version 25.2
[   105.011] (II) NVIDIA dlloader X Driver  580.82.07  Wed Aug 27 18:07:42 UTC 2025
[   105.011] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   105.011] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   105.011] (II) VESA: driver for VESA chipsets: vesa
[   105.013] (II) Loading sub module "fb"
[   105.013] (II) LoadModule: "fb"
[   105.013] (II) Module "fb" already built-in
[   105.013] (II) Loading sub module "wfb"
[   105.013] (II) LoadModule: "wfb"
[   105.013] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[   105.014] (II) Module wfb: vendor="X.Org Foundation"
[   105.014]    compiled for 1.21.1.15, module version = 1.0.0
[   105.014]    ABI class: X.Org ANSI C Emulation, version 0.4
[   105.019] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[   105.019] (EE) NVIDIA:     system's kernel log for additional error messages and
[   105.019] (EE) NVIDIA:     consult the NVIDIA README for details.
[   105.022] (EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
[   105.022] (EE) NVIDIA:     system's kernel log for additional error messages and
[   105.022] (EE) NVIDIA:     consult the NVIDIA README for details.
[   105.023] (II) modeset(0): using drv /dev/dri/card0
[   105.024] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   105.024] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   105.024] (==) modeset(0): RGB weight 888
[   105.024] (==) modeset(0): Default visual is TrueColor
[   105.024] (II) Loading sub module "glamoregl"
[   105.024] (II) LoadModule: "glamoregl"
[   105.024] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[   105.029] (II) Module glamoregl: vendor="X.Org Foundation"
[   105.029]    compiled for 1.21.1.15, module version = 1.0.1
[   105.029]    ABI class: X.Org ANSI C Emulation, version 0.4
[   105.450] (II) modeset(0): Refusing to try glamor on llvmpipe
[   105.452] (II) modeset(0): glamor initialization failed
[   105.452] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[   105.452] (II) modeset(0): Output None-1 has no monitor section
[   105.452] (II) modeset(0): EDID for output None-1
[   105.452] (II) modeset(0): Printing probed modes for output None-1
[   105.452] (II) modeset(0): Modeline "1024x768"x60.0   47.19  1024 1024 1024 1024  768 768 768 768 (46.1 kHz eP)
[   105.452] (II) modeset(0): Output None-1 connected
[   105.452] (II) modeset(0): Using exact sizes for initial modes
[   105.452] (II) modeset(0): Output None-1 using initial mode 1024x768 +0+0
[   105.452] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   105.452] (==) modeset(0): DPI set to (96, 96)
[   105.452] (II) Loading sub module "fb"
[   105.452] (II) LoadModule: "fb"
[   105.452] (II) Module "fb" already built-in
[   105.452] (II) UnloadModule: "vesa"
[   105.452] (II) Unloading vesa
[   105.452] (==) modeset(0): Backing store enabled
[   105.452] (==) modeset(0): Silken mouse enabled
[   105.452] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   105.452] (==) modeset(0): DPMS enabled
[   105.452] (II) Initializing extension Generic Event Extension
[   105.453] (II) Initializing extension SHAPE
[   105.453] (II) Initializing extension MIT-SHM
[   105.453] (II) Initializing extension XInputExtension
[   105.453] (II) Initializing extension XTEST

Alles anzeigen

Fortsetzung im nächsten poste

su_lin_user · 25. September 2025

Fortsetzung

Code

  105.453] (II) Initializing extension BIG-REQUESTS
[   105.453] (II) Initializing extension SYNC
[   105.453] (II) Initializing extension XKEYBOARD
[   105.453] (II) Initializing extension XC-MISC
[   105.454] (II) Initializing extension SECURITY
[   105.454] (II) Initializing extension XFIXES
[   105.454] (II) Initializing extension RENDER
[   105.454] (II) Initializing extension RANDR
[   105.454] (II) Initializing extension COMPOSITE
[   105.454] (II) Initializing extension DAMAGE
[   105.454] (II) Initializing extension MIT-SCREEN-SAVER
[   105.454] (II) Initializing extension DOUBLE-BUFFER
[   105.455] (II) Initializing extension RECORD
[   105.455] (II) Initializing extension DPMS
[   105.455] (II) Initializing extension Present
[   105.455] (II) Initializing extension DRI3
[   105.455] (II) Initializing extension X-Resource
[   105.455] (II) Initializing extension XVideo
[   105.455] (II) Initializing extension XVideo-MotionCompensation
[   105.455] (II) Initializing extension GLX
[   105.455] (II) AIGLX: Screen 0 is not DRI2 capable
[   105.469] (II) IGLX: Loaded and initialized swrast
[   105.469] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   105.469] (II) Initializing extension XFree86-VidModeExtension
[   105.470] (II) Initializing extension XFree86-DGA
[   105.470] (II) Initializing extension XFree86-DRI
[   105.470] (II) Initializing extension DRI2
[   105.472] (II) modeset(0): Damage tracking initialized
[   105.472] (II) modeset(0): Setting screen physical size to 270 x 203
[   105.555] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   105.555] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   105.555] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   105.555] (**) Power Button: Applying InputClass "system-keyboard"
[   105.555] (II) LoadModule: "libinput"
[   105.555] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[   105.558] (II) Module libinput: vendor="X.Org Foundation"
[   105.558]    compiled for 1.21.1.15, module version = 1.5.0
[   105.558]    Module class: X.Org XInput Driver
[   105.558]    ABI class: X.Org XInput driver, version 24.4
[   105.558] (II) Using input driver 'libinput' for 'Power Button'
[   105.558] (**) Power Button: always reports core events
[   105.558] (**) Option "Device" "/dev/input/event1"
[   105.563] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   105.563] (II) event1  - Power Button: device is a keyboard
[   105.563] (II) event1  - Power Button: device removed
[   105.579] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   105.579] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   105.579] (**) Option "xkb_model" "microsoftpro"
[   105.579] (**) Option "xkb_layout" "de"
[   105.579] (**) Option "xkb_variant" "nodeadkeys"
[   105.579] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   105.595] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   105.595] (II) event1  - Power Button: device is a keyboard
[   105.595] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   105.595] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   105.595] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   105.595] (**) Power Button: Applying InputClass "system-keyboard"
[   105.595] (II) Using input driver 'libinput' for 'Power Button'
[   105.595] (**) Power Button: always reports core events
[   105.595] (**) Option "Device" "/dev/input/event0"
[   105.596] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   105.596] (II) event0  - Power Button: device is a keyboard
[   105.596] (II) event0  - Power Button: device removed
[   105.615] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   105.615] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   105.615] (**) Option "xkb_model" "microsoftpro"
[   105.615] (**) Option "xkb_layout" "de"
[   105.615] (**) Option "xkb_variant" "nodeadkeys"
[   105.615] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   105.615] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   105.615] (II) event0  - Power Button: device is a keyboard
[   105.616] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[   105.616] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   105.616] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[   105.616] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[   105.616] (**) Logitech USB Optical Mouse: always reports core events
[   105.616] (**) Option "Device" "/dev/input/event2"
[   105.618] (II) event2  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   105.618] (II) event2  - Logitech USB Optical Mouse: device is a pointer
[   105.618] (II) event2  - Logitech USB Optical Mouse: device removed
[   105.643] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   105.643] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   105.643] (II) libinput: Logitech USB Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   105.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-5/1-5:1.0/0003:046D:C077.0001/input/input2/event2"
[   105.643] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[   105.643] (**) Option "AccelerationScheme" "none"
[   105.643] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[   105.643] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   105.643] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   105.644] (II) event2  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   105.644] (II) event2  - Logitech USB Optical Mouse: device is a pointer
[   105.645] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[   105.645] (II) No input driver specified, ignoring this device.
[   105.645] (II) This device may have been added with another device file.
[   105.646] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[   105.646] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   105.646] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[   105.646] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[   105.646] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[   105.646] (**) Logitech USB Keyboard: always reports core events
[   105.646] (**) Option "Device" "/dev/input/event3"
[   105.648] (II) event3  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[   105.648] (II) event3  - Logitech USB Keyboard: device is a keyboard
[   105.648] (II) event3  - Logitech USB Keyboard: device removed
[   105.669] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.0/0003:046D:C31C.0002/input/input3/event3"

Alles anzeigen

Fortsetzung im nächsten poste

su_lin_user · 25. September 2025

Fortsetzung

Code

 105.669] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[   105.669] (**) Option "xkb_model" "microsoftpro"
[   105.669] (**) Option "xkb_layout" "de"
[   105.669] (**) Option "xkb_variant" "nodeadkeys"
[   105.669] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   105.670] (II) event3  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[   105.670] (II) event3  - Logitech USB Keyboard: device is a keyboard
[   105.671] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event4)
[   105.671] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[   105.671] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   105.671] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[   105.671] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[   105.671] (**) Logitech USB Keyboard Consumer Control: always reports core events
[   105.671] (**) Option "Device" "/dev/input/event4"
[   105.673] (II) event4  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   105.673] (II) event4  - Logitech USB Keyboard Consumer Control: device is a keyboard
[   105.673] (II) event4  - Logitech USB Keyboard Consumer Control: device removed
[   105.705] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0003/input/input4/event4"
[   105.705] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 10)
[   105.705] (**) Option "xkb_model" "microsoftpro"
[   105.705] (**) Option "xkb_layout" "de"
[   105.705] (**) Option "xkb_variant" "nodeadkeys"
[   105.705] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   105.706] (II) event4  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   105.706] (II) event4  - Logitech USB Keyboard Consumer Control: device is a keyboard
[   105.707] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event5)
[   105.707] (**) Logitech USB Keyboard System Control: Applying InputClass "evdev keyboard catchall"
[   105.707] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[   105.707] (**) Logitech USB Keyboard System Control: Applying InputClass "system-keyboard"
[   105.707] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[   105.707] (**) Logitech USB Keyboard System Control: always reports core events
[   105.707] (**) Option "Device" "/dev/input/event5"
[   105.709] (II) event5  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[   105.709] (II) event5  - Logitech USB Keyboard System Control: device is a keyboard
[   105.709] (II) event5  - Logitech USB Keyboard System Control: device removed
[   105.731] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0003/input/input5/event5"
[   105.731] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 11)
[   105.731] (**) Option "xkb_model" "microsoftpro"
[   105.731] (**) Option "xkb_layout" "de"
[   105.731] (**) Option "xkb_variant" "nodeadkeys"
[   105.731] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   105.732] (II) event5  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[   105.732] (II) event5  - Logitech USB Keyboard System Control: device is a keyboard
[   105.733] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event10)
[   105.733] (II) No input driver specified, ignoring this device.
[   105.733] (II) This device may have been added with another device file.
[   105.733] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[   105.733] (II) No input driver specified, ignoring this device.
[   105.733] (II) This device may have been added with another device file.
[   105.734] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[   105.734] (II) No input driver specified, ignoring this device.
[   105.734] (II) This device may have been added with another device file.
[   105.734] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9)
[   105.734] (II) No input driver specified, ignoring this device.
[   105.734] (II) This device may have been added with another device file.
[   105.735] (II) config/udev: Adding input device USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch (/dev/input/event6)
[   105.735] (**) USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: Applying InputClass "evdev keyboard catchall"
[   105.735] (**) USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: Applying InputClass "libinput keyboard catchall"
[   105.735] (**) USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: Applying InputClass "system-keyboard"
[   105.735] (II) Using input driver 'libinput' for 'USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch'
[   105.735] (**) USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: always reports core events
[   105.735] (**) Option "Device" "/dev/input/event6"
[   105.737] (II) event6  - USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: is tagged by udev as: Keyboard
[   105.737] (II) event6  - USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: device is a keyboard
[   105.737] (II) event6  - USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: device removed
[   105.754] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:08:00.3/usb3/3-1/3-1.2/3-1.2:1.0/0003:0557:2407.0004/input/input6/event6"
[   105.754] (II) XINPUT: Adding extended input device "USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch" (type: KEYBOARD, id 12)
[   105.754] (**) Option "xkb_model" "microsoftpro"
[   105.754] (**) Option "xkb_layout" "de"
[   105.754] (**) Option "xkb_variant" "nodeadkeys"
[   105.754] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[   105.755] (II) event6  - USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: is tagged by udev as: Keyboard
[   105.755] (II) event6  - USB 2.0 Peripheral Switch USB 2.0 Peripheral Switch: device is a keyboard
[   105.756] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event12)
[   105.756] (II) No input driver specified, ignoring this device.
[   105.756] (II) This device may have been added with another device file.
[   105.756] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event13)
[   105.756] (II) No input driver specified, ignoring this device.
[   105.756] (II) This device may have been added with another device file.
[   105.757] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event14)
[   105.757] (II) No input driver specified, ignoring this device.
[   105.757] (II) This device may have been added with another device file.
[   105.757] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event15)
[   105.757] (II) No input driver specified, ignoring this device.
[   105.757] (II) This device may have been added with another device file.
[   105.758] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event16)
[   105.758] (II) No input driver specified, ignoring this device.
[   105.758] (II) This device may have been added with another device file.
[   105.758] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event17)
[   105.758] (II) No input driver specified, ignoring this device.
[   105.758] (II) This device may have been added with another device file.
[   105.758] (II) config/udev: Adding input device HD-Audio Generic Line Out Side (/dev/input/event18)
[   105.758] (II) No input driver specified, ignoring this device.
[   105.758] (II) This device may have been added with another device file.
[   105.759] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event19)
[   105.759] (II) No input driver specified, ignoring this device.
[   105.759] (II) This device may have been added with another device file.
[   105.759] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   105.759] (II) No input driver specified, ignoring this device.
[   105.759] (II) This device may have been added with another device file.

Alles anzeigen

Code

tumb1@Tuxedo2020:~> journalctl -b | grep -Ei 'nvidia|error'
Hint: You are currently not seeing messages from other users and the system.
      Users in the 'systemd-journal' group can see all messages. Pass -q to
      turn off this notice.
Sep 25 20:21:04 Tuxedo2020.fritz.box kscreen_backend_launcher[2166]: kscreen.xcb.helper: Event Error:  147
Sep 25 20:23:28 Tuxedo2020.fritz.box kwin_x11[1940]: kwin_core: XCB error: 152 (BadDamage), sequence: 55053, resource id: 11538351, major code: 143 (DAMAGE), minor code: 3 (Subtract)
tumb1@Tuxedo2020:~>

Jetzt hab' ich's geschafft !

Sauerland · 25. September 2025

Zitat von su_lin_user

Jetzt hab' ich's geschafft !

Nö denn:

Zitat von Sauerland
Poste:
Code
cat /var/log/Xorg.0.log
und als root:
Code
journalctl -b | grep -Ei 'nvidia|error'

Aber kannst du einmal mit

Code

nomodeset

im Grub starten?

su_lin_user · 25. September 2025

Oh sorry, ich hab vergessen als root auszuführen !

Nochmal ... sieht gleich etwas anders aus.

Code

tumb1@Tuxedo2020:~> sudo journalctl -b | grep -Ei 'nvidia|error'
[sudo] Passwort für root: 
Sep 25 22:18:58 localhost kernel: RAS: Correctable Errors collector initialized.
Sep 25 20:19:03 localhost kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Sep 25 20:19:03 localhost kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input8
Sep 25 20:19:03 localhost kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input9
Sep 25 20:19:03 localhost kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input10
Sep 25 20:19:03 localhost kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input11
Sep 25 20:20:41 localhost systemd[1]: Starting NVIDIA Persistence Daemon...
Sep 25 20:20:41 localhost systemd[1]: Started nvidia-powerd service.
Sep 25 20:20:41 localhost nvidia-powerd[1208]: nvidia-powerd version:2.0 (build 1)
Sep 25 20:20:41 localhost nvidia-powerd[1208]: ERROR! Allocate Root client failed 0x59
Sep 25 20:20:41 localhost systemd[1]: nvidia-powerd.service: Deactivated successfully.
Sep 25 20:20:41 localhost nvidia-persistenced[1295]: Verbose syslog connection opened
Sep 25 20:20:41 localhost nvidia-persistenced[1295]: Directory /var/run/nvidia-persistenced will not be removed on exit
Sep 25 20:20:41 localhost nvidia-persistenced[1295]: Started (1295)
Sep 25 20:20:41 localhost nvidia-persistenced[1295]: Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvidia*) exist, and that user 458 has read and write permissions for those files.
Sep 25 20:20:41 localhost nvidia-persistenced[1295]: PID file unlocked.
Sep 25 20:20:41 localhost nvidia-persistenced[1295]: PID file closed.
Sep 25 20:20:41 localhost nvidia-persistenced[1295]: Shutdown (1295)
Sep 25 20:20:41 localhost nvidia-persistenced[1204]: nvidia-persistenced failed to initialize. Check syslog for more details.
Sep 25 20:20:41 localhost systemd[1]: nvidia-persistenced.service: Control process exited, code=exited, status=1/FAILURE
Sep 25 20:20:41 localhost systemd[1]: nvidia-persistenced.service: Failed with result 'exit-code'.
Sep 25 20:20:41 localhost systemd[1]: Failed to start NVIDIA Persistence Daemon.
Sep 25 20:20:41 localhost polkitd[1214]: Error opening rules directory: Error opening directory “/run/polkit-1/rules.d”: No such file or directory (g-file-error-quark, 4)
Sep 25 20:20:41 localhost polkitd[1214]: Error opening rules directory: Error opening directory “/usr/local/share/polkit-1/rules.d”: No such file or directory (g-file-error-quark, 4)
Sep 25 20:20:41 localhost systemd[1]: nvidia-persistenced.service: Scheduled restart job, restart counter is at 1.
Sep 25 20:20:41 localhost systemd[1]: Starting NVIDIA Persistence Daemon...
Sep 25 20:20:41 localhost nvidia-persistenced[1362]: Verbose syslog connection opened
Sep 25 20:20:41 localhost nvidia-persistenced[1362]: Directory /var/run/nvidia-persistenced will not be removed on exit
Sep 25 20:20:41 localhost nvidia-persistenced[1362]: Started (1362)
Sep 25 20:20:41 localhost nvidia-persistenced[1362]: Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvidia*) exist, and that user 458 has read and write permissions for those files.
Sep 25 20:20:41 localhost nvidia-persistenced[1359]: nvidia-persistenced failed to initialize. Check syslog for more details.
Sep 25 20:20:41 localhost nvidia-persistenced[1362]: PID file unlocked.
Sep 25 20:20:41 localhost nvidia-persistenced[1362]: PID file closed.
Sep 25 20:20:41 localhost nvidia-persistenced[1362]: Shutdown (1362)
Sep 25 20:20:41 localhost systemd[1]: nvidia-persistenced.service: Control process exited, code=exited, status=1/FAILURE
Sep 25 20:20:41 localhost systemd[1]: nvidia-persistenced.service: Failed with result 'exit-code'.
Sep 25 20:20:41 localhost systemd[1]: Failed to start NVIDIA Persistence Daemon.
Sep 25 20:20:42 localhost systemd[1]: nvidia-persistenced.service: Scheduled restart job, restart counter is at 2.
Sep 25 20:20:42 localhost systemd[1]: Starting NVIDIA Persistence Daemon...
Sep 25 20:20:42 localhost nvidia-persistenced[1378]: Verbose syslog connection opened
Sep 25 20:20:42 localhost nvidia-persistenced[1378]: Directory /var/run/nvidia-persistenced will not be removed on exit
Sep 25 20:20:42 localhost nvidia-persistenced[1378]: Started (1378)
Sep 25 20:20:42 localhost nvidia-persistenced[1378]: Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvidia*) exist, and that user 458 has read and write permissions for those files.
Sep 25 20:20:42 localhost nvidia-persistenced[1366]: nvidia-persistenced failed to initialize. Check syslog for more details.
Sep 25 20:20:42 localhost nvidia-persistenced[1378]: PID file unlocked.
Sep 25 20:20:42 localhost nvidia-persistenced[1378]: PID file closed.
Sep 25 20:20:42 localhost nvidia-persistenced[1378]: Shutdown (1378)
Sep 25 20:20:42 localhost systemd[1]: nvidia-persistenced.service: Control process exited, code=exited, status=1/FAILURE
Sep 25 20:20:42 localhost systemd[1]: nvidia-persistenced.service: Failed with result 'exit-code'.
Sep 25 20:20:42 localhost systemd[1]: Failed to start NVIDIA Persistence Daemon.
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Scheduled restart job, restart counter is at 3.
Sep 25 20:20:42 localhost.localdomain systemd[1]: Starting NVIDIA Persistence Daemon...
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1439]: Verbose syslog connection opened
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1439]: Directory /var/run/nvidia-persistenced will not be removed on exit
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1439]: Started (1439)
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1439]: Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvidia*) exist, and that user 458 has read and write permissions for those files.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1439]: PID file unlocked.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1434]: nvidia-persistenced failed to initialize. Check syslog for more details.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1439]: PID file closed.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1439]: Shutdown (1439)
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Control process exited, code=exited, status=1/FAILURE
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Failed with result 'exit-code'.
Sep 25 20:20:42 localhost.localdomain systemd[1]: Failed to start NVIDIA Persistence Daemon.
Sep 25 20:20:42 localhost.localdomain smartd[1218]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 79 to 80
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Scheduled restart job, restart counter is at 4.
Sep 25 20:20:42 localhost.localdomain systemd[1]: Starting NVIDIA Persistence Daemon...
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1451]: Verbose syslog connection opened
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1451]: Directory /var/run/nvidia-persistenced will not be removed on exit
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1451]: Started (1451)
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1451]: Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvidia*) exist, and that user 458 has read and write permissions for those files.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1448]: nvidia-persistenced failed to initialize. Check syslog for more details.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1451]: PID file unlocked.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1451]: PID file closed.
Sep 25 20:20:42 localhost.localdomain nvidia-persistenced[1451]: Shutdown (1451)
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Control process exited, code=exited, status=1/FAILURE
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Failed with result 'exit-code'.
Sep 25 20:20:42 localhost.localdomain systemd[1]: Failed to start NVIDIA Persistence Daemon.
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Scheduled restart job, restart counter is at 5.
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Start request repeated too quickly.
Sep 25 20:20:42 localhost.localdomain systemd[1]: nvidia-persistenced.service: Failed with result 'exit-code'.
Sep 25 20:20:42 localhost.localdomain systemd[1]: Failed to start NVIDIA Persistence Daemon.
Sep 25 20:21:04 Tuxedo2020.fritz.box kscreen_backend_launcher[2166]: kscreen.xcb.helper: Event Error:  147
Sep 25 20:23:28 Tuxedo2020.fritz.box kwin_x11[1940]: kwin_core: XCB error: 152 (BadDamage), sequence: 55053, resource id: 11538351, major code: 143 (DAMAGE), minor code: 3 (Subtract)
Sep 25 20:27:01 Tuxedo2020.fritz.box kwin_x11[1940]: kwin_core: XCB error: 152 (BadDamage), sequence: 42843, resource id: 11542781, major code: 143 (DAMAGE), minor code: 3 (Subtract)
Sep 25 20:41:54 Tuxedo2020.fritz.box kwin_x11[1940]: kwin_core: XCB error: 152 (BadDamage), sequence: 7308, resource id: 11559092, major code: 143 (DAMAGE), minor code: 3 (Subtract)
tumb1@Tuxedo2020:~>

Alles anzeigen

Sauerland · 25. September 2025

Poste:

Code

zypper se -si kernel

TW nach system-update Bildschirmgrafik 1024x768

Ubuntu 26.10 „Stonking Stingray“ ist erschienen

Tumbleweed-Update bricht ab

KDE Plasma 6.8 verabschiedet sich von X11

VBox - gemeinsame Zwischenablage

Linux-Kernel: Kennzeichnungspflicht für KI-generierten Code soll entfallen

k.113

BlackPhoenix

aitexturegenerator

Giorgio68

pavelstr

Teilen