Hi,
ich möchte mein Laptop auf 13.1 upgraden. Das Problem:
- DVD/CD-Laufwerk hat seinen Geist aufgegeben
- USB-Variante bekomme ich nicht hab, habe auch derzeit keinen Datenträger
Ich habe allerdings von der Möglichkeit gehört, dass man OpenSUSE auch direkt online installieren könnte.
Kann mir jemand dazu bitte sagen, welche Schritte ich dazu unternehmen muss?
Danke im Voraus.
Ok. Werde das so weiter geben und euch dann berichten. Danke erst mal bis hier hin. Falls nur Ideen vorhanden sind, dann bitte immer her damit 
So. Kleines Feedback. Ich habe das USB-LAN an den betreffenden Rechner (Laptop) am WE angeschlossen. Wurde auch alles reibungslos vom Networkmanager erkannt und auch in Yast --> Netzwerkeinstellungen gelistet. Habe dann mal die Probe gemacht und eine Netzwerkverbindung zwischen Rechner und WLAN-Modem versucht aufzubauen. Wurde positiv in der Taskleiste durch ein Symbol bestätigt.
Es gibt aber auch leider Schatten. Der Rechner hat am Einsatzort nur eine Internet-Verbindung über LAN. Es handelt sich dabei um ein Heimnetzwerk in einem Internat. Dort aufgebaut zeigt der Rechner eine LAN-Verbindung an. Das USB-LAN arbeitet (blinkt) auch. Allerdings scheitert der Aufbau einer Internetseite. Nun ist es so, dass die Internetverbindung dort aufgrund der hohen Zugriffszahl noch nie wirklich dolle war. Wie kann ich jetzt aber rausfinden, ob das Problem am Rechner oder am Heimnetzwerk liegt?
Aus Laiensicht sieht es für mich so aus, dass der Rechner verbunden ist. Von der Seite daher kein Problem vorliegt und es daher nur am Hausinternen Netzwerk liegen kann? Was meint ihr dazu?
Ich probiere es dieses Wochenende auf dem betroffenen Rechner. Mit viel Glück klappt es vielleicht ohne Eingriff. Andernfalls melde ich mich im Laufe des Wochenendes nochmal. Schon mal Dankeschön bis hierhin.
Bevor Du hier weiterhin so Riesenbeiträge postest, was sagt:
Codelsusb
Gibt mir das aus
Bus 002 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 004 Device 002: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) DM9601 Fast Ethernet Adapter
Bus 005 Device 002: ID 046d:c078 Logitech, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubEdit:
Ich habe gerade mal aus Interesse in Yast ---> Netzwerkeinstellungen nachgeschaut, ob der Networkmanager das USB-LAN korrekt anzeigt. Tut es! Ist das ein gutes Zeichen bzw. bedeutet dies, dass ich keine Treiber installieren muss? Ich kann das leider nicht direkt am betroffenen PC selbst testen. Gehe aber davon aus, dass das dort auch so sein wird, da er ebenfalls unter OpenSUSE 13.1 läuft.
3. und Letzter Ordner bzgl. Linux trägt die Bezeichnung AX88772B_772A_760_772_178_Linux2.6.32_Driver_v3.2.1_Source
============================================================================
ASIX AX88178 USB 2.0 Gigabit Ethernet Network Adapter
ASIX AX88772 USB 2.0 Fast Ethernet Network Adapter
ASIX AX88772A USB 2.0 Fast Ethernet Network Adapter
ASIX AX88760 USB 2.0 MTT HUB and USB 2.0 to Fast Ethernet Combo Controller
ASIX AX88772B USB 2.0 Fast Ethernet Network Adapter
Driver Compilation & Configuration on the Linux
============================================================================
This driver has been verified on kernel versions from 2.6.14 to 2.6.32.
==================
Revision History :
==================
Version 3.2.1 July 05, 2010
* Fixups the net_device_ops structure compiling failure issue on Linux kernel 2.6.29.
Version 3.2.0 June. 03, 2010
* Fixups for compilation issues in kernel version 2.6.15.
Version 3.1.0 May. 18, 2010
* Corrected procedures of reading EEPROM data.
Version 3.0.0 May. 11, 2010
* Added to support AX88772B.
* Corrected initialization of Realtek PHY.
* Added to support MAC address replacement.
Version 2.6.0 Dec. 18, 2009
* Added AX88772A Power Saving Setting by EEPROM offset 17h support.
* Added AX88772 Default Power Saving function support.
Version 2.5.0 Dec. 01, 2009
* Corrected Realtek PHY reset function.
Version 2.4.0 Nov. 26, 2009
* Added to reset Realtek PHY via GPIO2 at initialization stage.
* Added to print information of driver version at initialization stage.
* Fixups for compilation issues in kernel version 2.6.30.
Version 2.3.0 Oct. 14, 2009
* Corrected LED setting for Realtek 8211CL PHY.
Version 2.2.0 Sep. 18, 2009
* Fixups for compilation issues in kernel version 2.6.19 or earlier.
* Increased AX88178 receive buffer size for performance improvement.
Version 2.1.0 Sep. 14, 2009
* Added Realtek PHY support.
* Added EDIMAX LED support.
Version 2.0.0 July. 02, 2009
* Modified PHY power process routine from common work queue to the
driver specific work queue.
* Fixups for compilation issues in kernel version 2.6.20.
Version 1.9.0 May. 14, 2009
* Fixups for packet transmission on big-endian platform.
Version 1.8.0 Apr. 27, 2009
* Chenged number rule from Major.Special.Minor to Major.Minor.Special .
* Fixups PHY power down and power up sequence.
Version 1.0.7 Mar. 17, 2009
* Added PHY power down and power up sequence.
Version 1.0.6 Nov. 06, 2008
* Fixups for compilation issues in kernel versions 2.6.25 and later.
Version 1.0.5 Sep. 26, 2007
* Added to support AX88772A
* Fixups for compilation issues in kernel version 2.6.22.
Version 1.0.4 Sep. 03, 2007
* Corrected the default value of receive filter.
* Corrected the value of IPG register.
Version 1.0.3 Oct. 23, 2006
* Fixed broken initialization on big-endian.
Version 1.0.2 Sep. 22, 2006
* Fixed bug in function set_media.
Version 1.0.1 Sep. 20, 2006
* Fixups for compilation issues in newest kernel version 2.6.16.
* External PHY support.
Version 1.0.0 Dec. 20, 2005
* New release.
================
Prerequisites
================
Prepare to build the driver, you need the Linux kernel sources installed on the
build machine, and make sure that the version of the running kernel must match
the installed kernel sources. If you don't have the kernel sources, you can get
it from www.kernel.org or contact to your Linux distributor. If you don't know
how to do, please refer to KERNEL-HOWTO.
Note1: Please make sure the kernel is built with one of the "Support for
Host-side, EHCI, OHCI, or UHCI" option support.
Note2: Please make sure the kernel is built with "Multi-purpose USB Networking
Framework" option support.
Note3: Check the necessary header file "usbnet.h" for building this driver.
Without this file, the driver compilation will fail and encounter
hundreds of errors all throuhout the souces. This file was located in
different directory according to your kernel version:
1. Linux kernel versions from 2.6.14 to 2.6.21
/Path-to-your-Linux-kernel-sources/drivers/usb/net/usbnet.h
2. Linux kernel versions from 2.6.22 to 2.6.24
/Path-to-your-Linux-kernel-sources/drivers/net/usb/usbnet.h
3. Linux kernel versions from 2.6.25 and later
/Path-to-your-Linux-kernel-sources/include/linux/usb/usbnet.h
================
Getting Start
================
1. Extract the compressed driver source file to your template directory by the
following command:
[root@localhost template]# tar -xf DRIVER_SOURCE_PACKAGE.tar.bz2
2. Now, the driver source files should be extracted under the current directory.
Executing the following command to compile the driver:
[root@localhost template]# make
3. If the compilation is well, the asix.ko will be created under the current
directory.
4. If you want to use modprobe command to mount the driver, executing the
following command to install the driver into your Linux:
[root@localhost template]# make install
================
Usage
================
1. If you want to load the driver manually, go to the driver directory and
execute the following commands:
[root@localhost anywhere]# modprobe usbnet
[root@localhost template]# insmod asix.ko
2. If you had installed the driver during driver compilation, then you can use
the following command to load the driver automatically.
[root@localhost anywhere]# modprobe asix
If you want to unload the driver, just executing the following command:
[root@localhost anywhere]# rmmod asix
[root@localhost anywhere]# rmmod usbnetPS: Sorry, musste mein Posting splitten, da zu groß
Im selben Hauptorner findet sich dann noch eine Datei mit der Bezeichnung AX88772A_760_720_178_Linux2.6.31_Driver_v2.5.0_Source
============================================================================
ASIX AX88178 USB 2.0 Gigabit Ethernet Network Adapter
ASIX AX88772 USB 2.0 Fast Ethernet Network Adapter
ASIX AX88772A USB 2.0 Fast Ethernet Network Adapter
ASIX AX88760 USB 2.0 MTT HUB and USB 2.0 to Fast Ethernet Combo Controller
Driver Compilation & Configuration on the Linux
============================================================================
This driver supports kernel versions from 2.6.14 to 2.6.31.
==================
Revision History :
==================
Version 2.5.0 Dec. 01, 2009
* Corrected Realtek PHY reset function.
Version 2.4.0 Nov. 26, 2009
* Added to reset Realtek PHY via GPIO2 at initialization stage.
* Added to print information of driver version at initialization stage.
* Fixups for compilation issues in kernel version 2.6.30.
Version 2.3.0 Oct. 14, 2009
* Corrected LED setting for Realtek 8211CL PHY.
Version 2.2.0 Sep. 18, 2009
* Fixups for compilation issues in kernel version 2.6.19 or earlier.
* Increased AX88178 receive buffer size for performance improvement.
Version 2.1.0 Sep. 14, 2009
* Added Realtek PHY support.
* Added EDIMAX LED support.
Version 2.0.0 July. 02, 2009
* Modified PHY power process routine from common work queue to the
driver specific work queue.
* Fixups for compilation issues in kernel version 2.6.20.
Version 1.9.0 May. 14, 2009
* Fixups for packet transmission on big-endian platform.
Version 1.8.0 Apr. 27, 2009
* Chenged number rule from Major.Special.Minor to Major.Minor.Special .
* Fixups PHY power down and power up sequence.
Version 1.0.7 Mar. 17, 2009
* Added PHY power down and power up sequence.
Version 1.0.6 Nov. 06, 2008
* Fixups for compilation issues in kernel versions 2.6.25 and later.
Version 1.0.5 Sep. 26, 2007
* Added to support AX88772A
* Fixups for compilation issues in kernel version 2.6.22.
Version 1.0.4 Sep. 03, 2007
* Corrected the default value of receive filter.
* Corrected the value of IPG register.
Version 1.0.3 Oct. 23, 2006
* Fixed broken initialization on big-endian.
Version 1.0.2 Sep. 22, 2006
* Fixed bug in function set_media.
Version 1.0.1 Sep. 20, 2006
* Fixups for compilation issues in newest kernel version 2.6.16.
* External PHY support.
Version 1.0.0 Dec. 20, 2005
* New release.
================
Prerequisites
================
Prepare to build the AX88772/AX88772A/AX88178 driver, you need the Linux kernel sources
installed on the build machine, and make sure that the version of the running kernel
must match the installed kernel sources.
If you don't have the kernel sources, you can get it from www.kernel.org or contact to
your Linux distributor. If you don't know how to do, please refer to KERNEL-HOWTO.
Note1: Please make sure the kernel is built with one of the "Support for Host-side,
EHCI, OHCI, or UHCI" option support.
Note2: Please make sure the kernel is built with "Multi-purpose USB Networking Framework"
option support.
Note3: Check the necessary header file "usbnet.h" for building this driver. Without
this file, the driver compilation will fail and encounter hundreds of errors
all throuhout the souces. This file was located in different directory
according to your kernel version:
1. Linux kernel versions from 2.6.14 to 2.6.21
/Path-to-your-Linux-kernel-sources/drivers/usb/net/usbnet.h
2. Linux kernel versions from 2.6.22 to 2.6.24
/Path-to-your-Linux-kernel-sources/drivers/net/usb/usbnet.h
3. Linux kernel versions from 2.6.25 and later
/Path-to-your-Linux-kernel-sources/include/linux/usb/usbnet.h
================
Getting Start
================
1. Extract the compressed driver source file to your template directory by the following command:
[root@localhost home]# tar -xf AX88772_772A_178_LINUX2.6.25_REV106_20080901.tar.bz2
2. Now, the AX88772_772A_178_LINUX2.6.25_REV106_20080901/ driver directory should be extracted
under current directory. Go to the driver directory, and executing the following command to
compiler the AX88772/AX88772A/AX88178 driver.
[root@localhost AX88772_772A_178_LINUX2.6.25_REV106_20080901]# make
3. If the compilation is well, the asix.ko will be created under the current directory.
4. If you want to use modprobe command to mount the AX88772/AX88772A/AX88178 driver, executing
the following command to install the driver into your Linux.
[root@localhost AX88772/AX88772A/AX88178]# make install
================
Usage
================
1. If you want to load the AX88772/AX88772A/AX88178 driver manually, go to the driver directory and
execute the following commands:
[root@localhost AX88772/AX88772A/AX88178]# modprobe usbnet
[root@localhost AX88772/AX88772A/AX88178]# insmod asix.ko
2. If you had installed the driver during driver compilation, then you can use the following command to
load the driver automatically.
[root@localhost anywhere]# modprobe asix
If you want to unload the AX88772/AX88772A/AX88178 driver, just executing the following command:
[root@localhost anywhere]# rmmod asix
[root@localhost anywhere]# rmmod usbnetHallo allerseits,
Ausgangspunkt war folgende Situation
[Gelöst] Nach Installation von OpenSUSE 13.1 kein LAN mehr
(Lan-Karte im Laptop scheinbar kaputt)
Daraufhin habe ich mir >>>diesen<<< USB-Lan-Adapter zugelegt, der wohl auch unter Linux laufen soll. Im Lieferumfang war auch eine CD mit Treiber dabei. Das Problem ist nun, dass ich nicht genau weiß, welchen Treiber ich nehmen muss, weil ich 3 Alternativen habe. Der betroffene Laptop läuft unter OpenSUSE 13.1.
Ich habe die Readme-Datein der entsprechenden Treiber mal kopiert. Vielleicht kann mir jemand aus dem Forum sagen, welcher Treiber der Richtige ist und wie ich vorzugehen habe.
Danke im Voraus.
Ordner #1 mit der Bezeichnung AX88772A und dem Unterordner AX88772_772A_178_Linux_2.6.9_Rev122
ZitatAlles anzeigen=====================================================
ASIX AX88178 USB2.0 Gigabit Ethernet Network Adapter
ASIX AX88772 USB2.0 Fast Ethernet Network Adapter
Driver Compilation & Configuration on the Linux
=====================================================
This driver is only for Kernel 2.6.9 to 2.6.13.
==================
Revision History :
==================
Version 1.2.2 Sep. 21, 2007
* Added to support AX88772A.
Version 1.2.1 Sep. 03, 2007
* Corrected the default value of receive filter.
* Corrected the value of IPG register.
Version 1.2.0 Oct. 24, 2006
* Fixed broken initialization on big-endian.
Version 1.1.1 Sep. 20, 2006
* Fixups for compilation issues on newest kernels.
* External PHY support.
Version 1.1.0 Dec. 20, 2005
* New Release.
===============
Prerequisites
===============
Prepare for compiler AX88178(ax88772) driver, you need the Linux2.6 Kernel
source. If you don't have the Kernel source, you can get from http://www.kernel.org
or from one of it's mirrors. If you don't know how to do, please refer to
KERNEL-HOWTO.
p.s. Please make sure the kernel is built with "Support for Host-side,
, EHCI, OHCI, and UHCI" option support.
===============
Getting Start
===============
1. Copy ax88178(ax88772) directory to your template directory
2. Now, you should have a ax88178 directory in your template directory. Go
to the ax88178 directory, and executing the following command to compiler
AX88178 Driver.
[root@localhost ax88178]# make
3. If the compilation well, the usbnet.ko will be created under the current
directory.
4. If you want to use modprobe command to mount AX88178 driver, executing the
following command to install AX88178 driver on your Linux.
[root@localhost ax88178]# make install
===============
Usage
===============
If you want to mount the AX88178 driver , go to the ax88178 directory and
executing the following command:
[root@localhost ax88178]# insmod usbnet.ko
or
[root@localhost anywhere]# modprobe usbnet
If you want to unmount the AX88178 driver, just typing the following command:
[root@localhost anywhere]# rmmod usbnet
Es kann auch sein, dass das Ding mit WLAN noch Jahre lang tut.
Und ja, es gibt einige Möglichkeiten Ethernet nachzurüsten.
Guck mal, ob es einen MiniPCIe Slot hat.
Wenn nicht, google "USB network card".
Danke für den Hinweis. Ich werde den Rechner mal aufschrauben, und nachsehen, ob ich so einen Slot sehe. Andernfalls ist die USB network carc eine nette Alternative 
MIST! Das bedeutet, dass man den Laptop in die Tonne treten kann? Noch funktioniert ja das WLAN. Ich hoffe, dass das auch so bleibt. Gibt es keine LAN-Karte, die man zusätzlich z.B. an einem USB-Anschluss anschließen kann? Sowas gibt es ja auch schließlich für WLAN.