Hallo,
habe alle Treiber entfernt. Dann das rpm gelöscht und nochmal installiert.
Jetzt kommt als root auch nur noch der Networktreiber
Beiträge von guenter57
-
-
Habe für user lp hinzugefügt. Reboot -> keine Besserung. Immer noch als user Networktreiber :-(((
-
Hallo Schaer!
Ich habe das Problem, dass im Yast einmal der
Lexmark-Treiber :libnet
und
libusb
schon existieren.
Ich kann in Yast jedoch nicht dauerhaft den USB-Treiber auswählen.
Wenn ich als root xsane starte root ist alles ok.
Unter user wird immer der net-treiber gewählt.
-
Dateiberechtigungen:
Easy
Benutzer der updatedb starten soll:
nobody
Magic SysRq Keys:
184
-
Code
guenter@localhost:~> scanimage -L device `lexmark_nscan:libnet/SPECIFY_DEVICE' is a Lexmark Network Scanner -
Code
localhost:~ # sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0403 [FTDI], product=0x6001 [USB Serial Converter]) at libusb:003:002
found USB scanner (vendor=0x043d [Lexmark], product=0x0230 [Lexmark MX410de]) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Als user:
guenter@localhost:~> sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not open USB device 0x8087/0x0024 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x0403/0x6001 at 003:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x0458/0x0056 at 001:005: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc312 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x043d/0x0230 at 001:003: Access denied (insufficient permissions)
could not open USB device 0x8087/0x0024 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
-
Jepp!
Nach wie vor Verhalten wie in Post #18
-
Sorry,
ich schon wieder.
Habe gerade unter root xsane gestartet.
Unter root ist scannen möglich. Hier wird der richtige Treiber in der obigen Programmleiste "Lexmark MX410 de an lexmark_nscan:libusb/001/003" angezeigt.
Bei user wird in der Programmleiste Lexmark Network an Lexmark:nscan:libnet/SPECIFY_DEVICE angezeigt.
Wahrscheinlich liegt da der Fehler. Nur wie kann ich das für user ändern?
-
Hallo,
Wenn ich aber mit meinem bescheidenen Englischkenntnissen die PDF Datei lese
geht es hauptsächlich um Wireless oder Ethernet?
Betreibe aber den Drucker/Scanner an einem USB-Kabel
Wie gesagt: Wenn ich im Yast unter Konfiguration des Scanners die Zeile
lexmark-scan Lexmark MX410de an lexmark_nscan:libusb/001/003 anwähle und dann den Test durchführe, erhalte ich:
lexmark_nscan erfolgreich getestet
Test mit 'scanimage -d lexmark_nscan:libusb/001/003 -v' erfolgreich.
Ergebnis:
Output format is not set, using pnm as a default.
scanimage: scanning image of size 1275x1650 pixels at 1 bits/pixel
scanimage: acquiring gray frame
scanimage: read 264000 bytes in total
Habe jetzt nochmal scanlite gestartet:
Hier erhalte ich den Hinweis:
Leider wurde das Programm unerwartet beendet.
Details:
Ausführbare Datei: skanlite PID:15756 Signal: Segmenttation fault (11)
Wenn ich dann die Entwickler-Information aufrufe erhalte ich:
Code
Alles anzeigenApplication: skanlite (skanlite), signal: Segmentation fault Using host libthread_db library "/lib64/libthread_db.so.1". [Current thread is 1 (Thread 0x7f8be4ada0c0 (LWP 15756))] Thread 8 (Thread 0x7f8b9b7fe700 (LWP 15766)): #0 0x00007f8bdcdfc87d in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f8bb709fe9b in ?? () from /usr/lib64/dri/r600_dri.so #2 0x00007f8bb709fa87 in ?? () from /usr/lib64/dri/r600_dri.so #3 0x00007f8bdcdf64f9 in start_thread () from /lib64/libpthread.so.0 #4 0x00007f8be0a85fbf in clone () from /lib64/libc.so.6 Thread 7 (Thread 0x7f8ba3fff700 (LWP 15765)): #0 0x00007f8bdcdfc87d in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f8bb709fe9b in ?? () from /usr/lib64/dri/r600_dri.so #2 0x00007f8bb709fa87 in ?? () from /usr/lib64/dri/r600_dri.so #3 0x00007f8bdcdf64f9 in start_thread () from /lib64/libpthread.so.0 #4 0x00007f8be0a85fbf in clone () from /lib64/libc.so.6 Thread 6 (Thread 0x7f8bb08d0700 (LWP 15764)): #0 0x00007f8bdcdfc87d in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f8bb709fe9b in ?? () from /usr/lib64/dri/r600_dri.so #2 0x00007f8bb709fa87 in ?? () from /usr/lib64/dri/r600_dri.so #3 0x00007f8bdcdf64f9 in start_thread () from /lib64/libpthread.so.0 #4 0x00007f8be0a85fbf in clone () from /lib64/libc.so.6 Thread 5 (Thread 0x7f8bb10d1700 (LWP 15763)): #0 0x00007f8bdcdfc87d in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f8bb709fe9b in ?? () from /usr/lib64/dri/r600_dri.so #2 0x00007f8bb709fa87 in ?? () from /usr/lib64/dri/r600_dri.so #3 0x00007f8bdcdf64f9 in start_thread () from /lib64/libpthread.so.0 #4 0x00007f8be0a85fbf in clone () from /lib64/libc.so.6 Thread 4 (Thread 0x7f8bc2e41700 (LWP 15762)): #0 0x00007f8bdcdfc87d in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0 #1 0x00007f8bb709fe9b in ?? () from /usr/lib64/dri/r600_dri.so #2 0x00007f8bb709fa87 in ?? () from /usr/lib64/dri/r600_dri.so #3 0x00007f8bdcdf64f9 in start_thread () from /lib64/libpthread.so.0 #4 0x00007f8be0a85fbf in clone () from /lib64/libc.so.6 Thread 3 (Thread 0x7f8bc9944700 (LWP 15759)): #0 0x00007f8be0a931fa in __libc_disable_asynccancel () from /lib64/libc.so.6 #1 0x00007f8be0a7b6ef in poll () from /lib64/libc.so.6 #2 0x00007f8bdaf20779 in ?? () from /usr/lib64/libglib-2.0.so.0 #3 0x00007f8bdaf2088c in g_main_context_iteration () from /usr/lib64/libglib-2.0.so.0 #4 0x00007f8be1409cdb in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/libQt5Core.so.5 #5 0x00007f8be13aae8a in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib64/libQt5Core.so.5 #6 0x00007f8be11d021a in QThread::exec() () from /usr/lib64/libQt5Core.so.5 #7 0x00007f8be2c48cd5 in ?? () from /usr/lib64/libQt5DBus.so.5 #8 0x00007f8be11d19c2 in ?? () from /usr/lib64/libQt5Core.so.5 #9 0x00007f8bdcdf64f9 in start_thread () from /lib64/libpthread.so.0 #10 0x00007f8be0a85fbf in clone () from /lib64/libc.so.6 Thread 2 (Thread 0x7f8bd18ee700 (LWP 15758)): #0 0x00007f8be0a7b6db in poll () from /lib64/libc.so.6 #1 0x00007f8bd98af307 in ?? () from /usr/lib64/libxcb.so.1 #2 0x00007f8bd98b0f3a in xcb_wait_for_event () from /usr/lib64/libxcb.so.1 #3 0x00007f8bd46e3300 in ?? () from /usr/lib64/libQt5XcbQpa.so.5 #4 0x00007f8be11d19c2 in ?? () from /usr/lib64/libQt5Core.so.5 #5 0x00007f8bdcdf64f9 in start_thread () from /lib64/libpthread.so.0 #6 0x00007f8be0a85fbf in clone () from /lib64/libc.so.6 Thread 1 (Thread 0x7f8be4ada0c0 (LWP 15756)): [KCrash Handler] #4 0x00007f8bdcdfb6d2 in pthread_rwlock_wrlock () from /lib64/libpthread.so.0 #5 0x00007f8bd8ef9dd9 in CRYPTO_THREAD_write_lock () from /usr/lib64/libcrypto.so.1.1 #6 0x00007f8bd8e9d52b in OBJ_NAME_add () from /usr/lib64/libcrypto.so.1.1 #7 0x00007f8bd8e7e9c0 in EVP_add_cipher () from /usr/lib64/libcrypto.so.1.1 #8 0x00007f8bc31974c1 in SSL_library_init () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #9 0x00007f8bc31595a3 in Curl_ossl_init () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #10 0x00007f8bc313d0d0 in curl_global_init () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #11 0x00007f8bc30ec566 in NetComm::NetComm() () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #12 0x00007f8bc30faf36 in Device::CreateInstance(char const*, void*) () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #13 0x00007f8bc3100aa8 in ScanLib::Open(char const*) () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #14 0x00007f8bc310d424 in sane_ScanLib_open(char const*, void**) () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #15 0x00007f8bc311b275 in sane_lexmark_nscan_open () from /usr/lib64/sane/libsane-lexmark_nscan.so.1 #16 0x00007f8be0779b59 in sane_dll_open () from /usr/lib64/libsane.so.1 #17 0x00007f8be46d63b9 in KSaneIface::KSaneWidget::openDevice(QString const&) () from /usr/lib64/libKF5Sane.so.5 #18 0x00005637bc673939 in ?? () #19 0x00005637bc66c4e1 in ?? () #20 0x00007f8be09ae34a in __libc_start_main () from /lib64/libc.so.6 #21 0x00005637bc66c6fa in _start () [Inferior 1 (process 15756) detached]Kann man damit etwas anfangen?
-
Code
scanimage -L device `lexmark_nscan:libnet/SPECIFY_DEVICE' is a Lexmark Network Scanner