Beiträge von guenter57

linux:~ # cat /etc/sane.d/net.conf
# This is the net backend config file.

## net backend options
# Timeout for the initial connection to saned. This will prevent the backend
# from blocking for several minutes trying to connect to an unresponsive
# saned host (network outage, host down, ...). Value in seconds.
# connect_timeout = 60

## saned hosts
# Each line names a host to attach to.
# If you list "localhost" then your backends can be accessed either
# directly or through the net backend.  Going through the net backend
# may be necessary to access devices that need special privileges.
# localhost





linux:~ # cat /etc/sane.d/dll.conf
# dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under the dll.d/
# directory -- third party backends can drop their configuration file in
# this in this directory, named after the backend.
#
# The next line enables the network backend; comment it out if you don't
# need to use a remote SANE scanner over the network -- see sane-net(5)
# and saned(8) for details.
#net
#abaton
#agfafocus
#apple
#avision
#artec
#artec_eplus48u
#as6e
#bh
#canon
#canon630u
#canon_dr
#canon_pp
#cardscan
#coolscan
#coolscan2
#coolscan3
#dc25
#dc210
#dc240
#dell1600n_net
#dmc
#epjitsu
#epson
#epson2
#epsonds
#fujitsu
#gphoto2
#genesys
#gt68xx
#hp
#hp3900
#hpsj5s
#hp3500
#hp4200
#hp5400
#hp5590
#hpljm1005
#hs2p
#ibm
#kodak
#kodakaio
#kvs1025
#kvs20xx
#leo
#lexmark
#ma1509
#magicolor
#matsushita
#microtek
#microtek2
#mustek
#mustek_pp
#mustek_usb
#mustek_usb2
#nec
#niash
#p5
#pie
#pint
#pixma
#plustek
#plustek_pp
#pnm
#qcam
#ricoh
#rts8891
#s9036
#sceptre
#sharp
#sm3600
#sm3840
#snapscan
#sp15c
#st400
#stv680
#tamarack
#teco1
#teco2
#teco3
#test
#u12
#umax
#umax_pp
#umax1220u
#v4l
#xerox_mfp
#lexmark_nscan
#lexmark_nscan
lexmark_nscan

linux:~ # cat /usr/lexscan/etc/scan.conf 
[INTEGERS]
BGRTORGB=0
COLORCORRECT=0
ADFSIDEFLIP=0
FLATBEDSIDEFLIP=0
ADFPREVIEW=0
COMPRESSION=0
COMPRESSIONLEVEL=0
COMMANDVERSION=600
ENABLE_NPA=0
PREVIEW=0
FAMILYID=17

# Box Kind:
#    Indicates the box packaging of the scanner device.
#    
#    0 PS&SD    
#    1 ISD    
BOXKIND=0

#  Image Settings:
#    content-type
#        Indicates the type of material to be scanned.
#        Valid values are 0,1,2. Default value is 1.
#
#        0 Text 
#        1 Text/Graphics 
#        2 Photo
CONTENTTYPE=1
#    scan-resolution 
#        The resolution of the scan job in dots per inch.
#        Valid values are 75,150,200,300,400,600. Default value is 150.
#SCANRESOLUTION=150
DEFAULTDPI=150
CURRENTDPI=150

#    mode 
#        The color depth of the scan job.
#        Valid values are 0,1,2. Default value is 1.
#        
#        0 1-bit Black & White
#        1 8-bit Grayscale 
#        2 24-bit Color
MODE=1
#COLORDEPTH=1

#    document-source
#        0 Black and White Laser
#        1 Color Laser
#        2 Inkjet Plain
#        3 Inkjet Glossy
#        4 Retail Photo
#        5 Photo
#        6 Magazine
#        7 Newspaper
#        8 Press
#        9 Auto/Other
DOCUMENTSOURCE=0

#    original-size 
#        The size of the area to be scanned.
#        Valid values are 0 - 26. Default value is 0.
#         
#        0  Letter        14 Business Card
#        1  Executive     15 Book Original
#        2  Legal         16 Auto Size
#        3  A3            17 Mixed Size
#        4  A4            18 Universal
#        5  A5            19 ID Card
#        6  A6            20 Oficio (México)
#        7  B4            21 Custom Scan Size 1
#        8  B5            22 Custom Scan Size 2
#        9  Tabloid       23 Custom Scan Size 3
#        10 Folio         24 Custom Scan Size 4
#        11 Statement     25 Custom Scan Size 5
#        12 3X5 Photo     26 Custom Scan Size 6
#        13 4X6 Photo
#                    
ORIGINALSIZE=0

#    orientation 
#        The orientation of the original document text.
#        Valid values are 0 and 1. Default value is 0.
#
#        0 Portrait      
#        1 Landscape 
ORIENTATION=0

#    scan-both-sides
#        Scan both sides of the document.
#        Valid values are 0 and 1. Default value is 0.
#
#        0 no         
#        1 yes
SCANBOTHSIDES=0

#    source 
#        Indicates the number of pages to be scanned.
#        Valid values are 0 and 1. Default value is 0.
#        
#        0 Single Page
#        1 Multiple Pages
#option scan-source 0
SCAN_SOURCE=0

#  Advanced Settings:
#    brightness
#        Adjusts the brightness setting for this scan.
#        Valid values for PSSD are 1 - 9. Default value is 5.
#        Valid values for ISD are -2 - 2. Default value is 0.
BRIGHTNESS=5

#    contrast
#        Adjusts the contrast setting used for this scan.
#        Valid values for PSSD are 0 - 5. Default value is 0.
#        Valid values for ISD are -2 - 2. Default value is 0.
CONTRAST=0

#   bkgremoval
#       Increasing background removal will make more
#       light shades equal white.  Decreasing 
#       background removal will preserve more light 
#       shades. 
#
#       Valid values for PSSD are -4 to 4. Default value is 0.
#       Valid values for ISD are 0=Auto, 1=Off, 2=mild, 
#       3=moderate, 4=strong, 5=strongest. Default value is 1.
BKGREMOVAL=0

#   mirrorimage
#       Rotates scanned image horizontally.
#       Valid values are 1 and 0. Default value is 0.
MIRRORIMAGE=0

#   colordropout
#       Removes the selected color on the scanned
#       image, then returns it in gray scale or 
#       black and white. Valid values are 0=None,
#       1=Red, 2=Green, 3=Blue. Default value is 0.
#
COLORDROPOUT=0

#   colordropoutthreshold
#       Works with color dropout, if color dropout 
#       is equal to none, this option is inactive.
#       This will control the quality of color 
#       dropout. Valid values are 0 to 254. Defalut 
#       value is 128.
COLORDROPOUTTHRESHOLD=128

#   negativeimage
#       Inverts the pixel values. Valid values are 
#       0 and 1. Default value is 0.
NEGATIVEIMAGE=0

#  Text or GUI mode:
#    text-mode 
#        Launch this program with text mode or no.
#        Valid values are 0 and 1. Default value is 0.
TEXTMODE=0

[DOUBLES]
TOPLEFTX=0.0
TOPLEFTY=0.0
BOTTOMRIGHTX=215.9
BOTTOMRIGHTY=297.0
CURRENTTLX=0.0
CURRENTTLY=0.0
CURRENTBRX=215.9
CURRENTBRY=297.0

[STRINGS]
SCLIB=
SCFUNC=
COLORLUT=
GRAYLUT=

#  Scanner:
#    device
#[scanner]
#device SANE_DEVICE_FILE

#    ip-address
#        The IP address / hostname associated with this scan job.
IPADDRESS=0.0.0.0

#  Profile Information:
#    user-name
#        The user name associated with this scan job.
USERNAME=current

#    profile-name
#        The profile name associated with this scan job.
PROFILENAME=Scan_01


#  Temporary Directory:
#    temp-directory
#       Directory where the scanned images are stored temporarily.
TEMPDIRECTORY=/tmp/lexscan-scan-images

#  System Network Interface:
#    interface
#        The interface associated with this scan job.
#        This option is used to select the appropriate network interface,
#        If you encounter one of the following situations.
#
#        1.You have multiple network cards and the wrong one is being selected.
#        2.You are receiving the interface selection dialog and you would 
#          like for the backend to automatically select the interface without
#          being prompted.
#  Example values are:  eth0, eth1, wlan0.

INTERFACE=any

#  JScan Binary:
#     The file path to the jscan standalone tool 
BINARY=/usr/lexscan/bin/lexscan

#  Installation Directory:
#     The path to the installation directory where the driver and other
#     file are to be installed or linked
INSTALLDIRECTORY=/usr/lexscan/

#  Interpolation Binary:
#     The file path to the interpolation tool
INTERPOLATEBINARY=/usr/lexscan/bin/pxmstretch