Da Du versuchst mittels samba zu mounten, wird das mit den Rechten so nicht funktionieren, das muss man in der /etc/samba/smb.conf tun.
... oder Du man mountet es mit nfs (nfsserver muss installiert sein auf NAS {gleiche Benutzerkennungen auf beiden Rechnern nicht unnötig:)})
... oder man geht mittels ssh -XC user@rechner auf den NAS und ändert dort die Rechte (sshd muss installiert sein auf NAS)
hope this helps
Hi,
habe dasselbe Problem bei meinem eeePC 901...
Folgende info liefert hwinfo --bios
01: None 00.0: 10105 BIOS
[Created at bios.186]
Unique ID: rdCR.lZF+r4EgHp4
Hardware Class: bios
BIOS Keyboard LED Status:
Scroll Lock: off
Num Lock: off
Caps Lock: off
Base Memory: 639 kB
PnP BIOS: @@@0000
BIOS: extended read supported
MP spec rev 1.4 info:
OEM id: "INTEL"
Product id: ""
1 CPUs (0 disabled)
BIOS32 Service Directory Entry: 0xf0010
SMBIOS Version: 2.5
BIOS Info: #0
Vendor: "American Megatrends Inc."
Version: "2103"
Date: "06/11/2009"
Start Address: 0xf0000
ROM Size: 512 kB
Features: 0x0533000100017f8bde90
ISA supported
PCI supported
PnP supported
APM supported
BIOS flashable
BIOS shadowing allowed
ESCD supported
CD boot supported
Selectable boot supported
BIOS ROM socketed
EDD spec supported
1.2MB Floppy supported
720kB Floppy supported
2.88MB Floppy supported
Print Screen supported
8042 Keyboard Services supported
Serial Services supported
Printer Services supported
CGA/Mono Video supported
ACPI supported
USB Legacy supported
LS-120 boot supported
ATAPI ZIP boot supported
BIOS Boot Spec supported
System Info: #1
Manufacturer: "ASUSTeK Computer INC."
Product: "901"
Version: "x.x"
Serial: "8BOAAQ132372"
UUID: undefined, but settable
Wake-up: 0x06 (Power Switch)
Board Info: #2
Manufacturer: "ASUSTeK Computer INC."
Product: "901"
Version: "x.xx"
Serial: "EeePC-0123456789"
Asset Tag: "To Be Filled By O.E.M."
Type: 0x0a (Motherboard)
Features: 0x09
Hosting Board
Replaceable
Location: "To Be Filled By O.E.M."
Chassis: #3
Chassis Info: #3
Manufacturer: "ASUSTek Computer INC."
Version: "x.x"
Serial: "0x00000000"
Asset Tag: "0x00000000"
Type: 0x0a (Notebook)
Lock: present
Bootup State: 0x03 (Safe)
Power Supply State: 0x03 (Safe)
Thermal State: 0x03 (Safe)
Security Status: 0x03 (None)
Processor Info: #4
Socket: "PBGA 437"
Socket Type: 0x01 (Other)
Socket Status: Populated
Type: 0x03 (CPU)
Family: 0xbd (Other)
Manufacturer: "Intel"
Version: "Intel(R) Atom(TM) CPU N270 @ 1.60GHz"
Serial: "To Be Filled By O.E.M."
Asset Tag: "To Be Filled By O.E.M."
Part Number: "To Be Filled By O.E.M."
Processor ID: 0xbfe9fbff000106c2
Status: 0x01 (Enabled)
Voltage: 1.3 V
External Clock: 133 MHz
Max. Speed: 1600 MHz
Current Speed: 1600 MHz
L1 Cache: #5
L2 Cache: #6
L3 Cache: #7
Cache Info: #5
Designation: "L1-Cache"
Level: L1
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x04 (Parity)
Type: 0x04 (Data)
Associativity: 0x01 (Other)
Max. Size: 24 kB
Current Size: 24 kB
Supported SRAM Types: 0x0001 (Other)
Current SRAM Type: 0x0001 (Other)
Cache Info: #6
Designation: "L2-Cache"
Level: L2
State: Enabled
Mode: 0x01 (Write Back)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x05 (Single-bit)
Type: 0x05 (Unified)
Associativity: 0x07 (8-way Set-Associative)
Max. Size: 512 kB
Current Size: 512 kB
Supported SRAM Types: 0x0001 (Other)
Current SRAM Type: 0x0001 (Other)
Cache Info: #7
Designation: "L3-Cache"
Level: L3
State: Disabled
Mode: 0x03 (Unknown)
Location: 0x00 (Internal, Not Socketed)
ECC: 0x02 (Unknown)
Type: 0x02 (Unknown)
Associativity: 0x02 (Unknown)
Supported SRAM Types: 0x0002 (Unknown)
Current SRAM Type: 0x0002 (Unknown)
Type 5 Record: #8
Data 00: 05 12 08 00 06 04 03 03 0a 01 00 00 05 02 01 09
Data 10: 00 04
Type 6 Record: #9
Data 00: 06 0c 09 00 01 01 00 00 05 0a 0a 00
String 1: "DIMM0"
Port Connector: #10
Type: 0x10 (USB)
Internal Designator: "J2A2"
External Designator: "USB1"
External Connector: 0x12 (Access Bus [USB])
Type 15 Record: #23
Data 00: 0f 23 17 00 04 00 00 00 02 00 02 00 00 00 00 00
Data 10: 6a 04 6c 04 00 06 02 ff ff ff ff ff ff ff ff ff
Data 20: ff ff ff
Physical Memory Array: #24
Use: 0x03 (System memory)
Location: 0x03 (Motherboard)
Slots: 1
Max. Size: 4 GB
ECC: 0x03 (None)
Memory Array Mapping: #25
Memory Array: #24
Partition Width: 4
Start Address: 0x00000000
End Address: 0x40000400
Memory Device: #26
Location: "DIMM0"
Bank: "BANK0"
Manufacturer: "Manufacturer0"
Serial: "SerNum0"
Asset Tag: "AssetTagNum0"
Part Number: "PartNum0"
Memory Array: #24
Form Factor: 0x09 (DIMM)
Type: 0x0f (SDRAM)
Type Detail: 0x0080 (Synchronous)
Data Width: 64 bits
Size: 1 GB
Memory Device Mapping: #27
Memory Device: #26
Array Mapping: #25
Row: 1
Interleave Pos: 0
Interleaved Depth: 1
Start Address: 0x00000000
End Address: 0x40000000
Type 32 Record: #28
Data 00: 20 14 1c 00 00 00 00 00 00 00 00 00 00 00 00 00
Data 10: 00 00 00 00
Config Status: cfg=new, avail=yes, need=no, active=unknownboot.omsg liefert:
<4>[ 0.000000] could not find any ACPI SRAT memory areas.
<3>[ 0.000000] failed to get NUMA memory information from SRAT table
<7>[ 0.000000] NUMA - single node, flat memory mode
<6>[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3f7a0
<7>[ 0.000000] Setting physnode_map array to node 0 for pfns:
<7>[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000
<7>[ 0.000000] node 0 pfn: [0 - 3f7a0]
<7>[ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3ee00
<7>[ 0.000000] remove_active_range (0, 257536, 259584)
<6>[ 0.000000] Reserving total of 800 pages for numa KVA remap
<6>[ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe
<6>[ 0.000000] max_pfn = 3f7a0
<5>[ 0.000000] 135MB HIGHMEM available.
<5>[ 0.000000] 879MB LOWMEM available.
<7>[ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe
<7>[ 0.000000] Low memory ends at vaddr f6ffe000
<7>[ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000
<7>[ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000
<7>[ 0.000000] remap_numa_kva: node 0
<7>[ 0.000000] remap_numa_kva: f6600000 to pfn 0003ee00
<7>[ 0.000000] remap_numa_kva: f6800000 to pfn 0003f000
<7>[ 0.000000] remap_numa_kva: f6a00000 to pfn 0003f200
<7>[ 0.000000] remap_numa_kva: f6c00000 to pfn 0003f400
<7>[ 0.000000] High memory starts at vaddr f6ffe000
<6>[ 0.000000] mapped low ram: 0 - 36ffe000
<6>[ 0.000000] low ram: 0 - 36ffe000
<6>[ 0.000000] node 0 low ram: 00000000 - 36ffe000
<6>[ 0.000000] node 0 bootmap 00018000 - 0001ee00
<6>[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000]
<6>[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
<6>[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6>[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
<6>[ 0.000000] #3 [0000200000 - 0000aefa90] TEXT DATA BSS ==> [0000200000 - 0000aefa90]
<6>[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
<6>[ 0.000000] #5 [0000af0000 - 0000af81f0] BRK ==> [0000af0000 - 0000af81f0]
<6>[ 0.000000] #6 [0000010000 - 0000018000] PGTABLE ==> [0000010000 - 0000018000]
<6>[ 0.000000] #7 [0000af9000 - 0001183d89] NEW RAMDISK ==> [0000af9000 - 0001183d89]
<6>[ 0.000000] #8 [003ee00000 - 003f600000] KVA RAM
<6>[ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000 - 0036e00000]
<6>[ 0.000000] #10 [0000018000 - 000001f000] BOOTMAP ==> [0000018000 - 000001f000]
<6>[ 0.000000] found SMP MP-table at [c00ff780] ff780
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0x00000010 -> 0x00001000
<4>[ 0.000000] Normal 0x00001000 -> 0x00036ffe
<4>[ 0.000000] HighMem 0x00036ffe -> 0x0003f7a0
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[3] active PFN ranges
<4>[ 0.000000] 0: 0x00000010 -> 0x0000009f
<4>[ 0.000000] 0: 0x00000100 -> 0x0003ee00
<4>[ 0.000000] 0: 0x0003f600 -> 0x0003f7a0
<7>[ 0.000000] On node 0 totalpages: 257839
<7>[ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map f6602200
<7>[ 0.000000] DMA zone: 32 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
<7>[ 0.000000] Normal zone: 1728 pages used for memmap
<7>[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 272 pages used for memmap
<7>[ 0.000000] HighMem zone: 32402 pages, LIFO batch:7
<6>[ 0.000000] Using APIC driver defaultMusste boot.omsg und hwinfo kürzen da der Beitrag >10000 Zeichen war.
Hoffe mal die infos reichen