Riesige Darstellung nach NVIDIA Treiber auf Leap 15.3

papa_arrugada · 16. Mai 2022

Hallo,

ich komme leider alleine nicht mehr weiter.

Setze gerade einen neuen PC mit Leap 15.3 auf und hatte mit dem mitgelieferten Treiber meine Auflösung von 1920x1080.

Ich habe bereits mehrfach versucht den NVIDIA Treiber zu installieren, komme aber immer zur riesigen Darstellung.

Meine Grafikkarte: GT 1030.

Laut Nvidia Homepage sollte dafür der Treiber mit der Version 510.68.02 passen, was auch im Nvidia-Repo dem 06er Paket entsprechen würde.

Habe per Repo und Pakete die Installation versucht und nach Deinstallation den Treiber direkt von der HP von NVIDIA, also die run Datei.

Ergebnis:

Riesige Darstellung, habe die Nvidia X Server Settings unter Anwendungen installiert, was auch meinen Monitortyp anzeigt.

Kann mir bitte jemand weiterhelfen?

papa_arrugada · 16. Mai 2022

hwinfo --gfxcard

Code

19: PCI b00.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.386]
  Unique ID: IluS.Geo4XLWEfzB
  Parent ID: w+J7.93wBZi3uma4
  SysFS ID: /devices/pci0000:00/0000:00:03.1/0000:0b:00.0
  SysFS BusID: 0000:0b:00.0
  Hardware Class: graphics card
  Model: "nVidia GP108 [GeForce GT 1030]"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x1d01 "GP108 [GeForce GT 1030]"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x85f4 
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xfb000000-0xfbffffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
  Memory Range: 0xe0000000-0xe1ffffff (ro,non-prefetchable)
  I/O Ports: 0xf000-0xffff (rw)
  Memory Range: 0xfc000000-0xfc07ffff (ro,non-prefetchable,disabled)
  IRQ: 96 (37105 events)
  Module Alias: "pci:v000010DEd00001D01sv00001043sd000085F4bc03sc00i00"
  Driver Info #0:
    Driver Status: nouveau is not active
    Driver Activation Cmd: "modprobe nouveau"
  Driver Info #1:
    Driver Status: nvidia_drm is active
    Driver Activation Cmd: "modprobe nvidia_drm"
  Driver Info #2:
    Driver Status: nvidia is active
    Driver Activation Cmd: "modprobe nvidia"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #9 (PCI bridge)

Primary display adapter: #19

Alles anzeigen

uname -r

Code

5.3.18-150300.59.63-default

Sauerland · 16. Mai 2022

Poste mal:

Code

cat /var/log/Xorg.0.log

papa_arrugada · 16. Mai 2022

muß vierteln:

Teil1:

Code

[    24.722] (--) Log file renamed from "/var/log/Xorg.pid-1419.log" to "/var/log/Xorg.0.log"
[    24.723] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[    24.723] Build Operating System: openSUSE SUSE LINUX
[    24.723] Current Operating System: Linux localhost 5.3.18-150300.59.63-default #1 SMP Tue Apr 5 12:47:31 UTC 2022 (d77db66) x86_64
[    24.723] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.18-150300.59.63-default root=UUID=eef90fdf-80d8-491f-a582-f0ed283b9c03 splash=silent mitigations=auto quiet
[    24.723] Build Date: 18 March 2022  12:00:00PM
[    24.723]  
[    24.723] Current version of pixman: 0.34.0
[    24.723]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    24.723] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.723] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 16 15:31:55 2022
[    24.724] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    24.724] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.725] (==) No Layout section.  Using the first Screen section.
[    24.725] (==) No screen section available. Using defaults.
[    24.725] (**) |-->Screen "Default Screen Section" (0)
[    24.725] (**) |   |-->Monitor "<default monitor>"
[    24.725] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    24.725] (==) Automatically adding devices
[    24.725] (==) Automatically enabling devices
[    24.725] (==) Automatically adding GPU devices
[    24.725] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    24.727] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    24.727]    Entry deleted from font path.
[    24.728] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
[    24.728] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    24.728] (WW) Ignoring unrecognized extension "XFree86-DGA"
[    24.728] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.728] (II) Loader magic: 0x55c9a908cd20
[    24.728] (II) Module ABI versions:
[    24.728]    X.Org ANSI C Emulation: 0.4
[    24.728]    X.Org Video Driver: 24.0
[    24.728]    X.Org XInput driver : 24.1
[    24.728]    X.Org Server Extension : 10.0
[    24.728] (++) using VT number 7

[    24.728] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    24.728] (II) xfree86: Adding drm device (/dev/dri/card0)
[    24.730] (--) PCI:*(11@0:0:0) 10de:1d01:1043:85f4 rev 161, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[    24.730] (II) LoadModule: "glx"
[    24.731] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    24.732] (II) Module glx: vendor="X.Org Foundation"
[    24.732]    compiled for 1.20.3, module version = 1.0.0
[    24.732]    ABI class: X.Org Server Extension, version 10.0
[    24.732] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    24.732]    loading driver: nvidia
[    24.732] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[    24.732] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[    24.732] (==) Matched nvidia as autoconfigured driver 0
[    24.732] (==) Matched nouveau as autoconfigured driver 1
[    24.732] (==) Matched nv as autoconfigured driver 2
[    24.732] (==) Matched modesetting as autoconfigured driver 3
[    24.732] (==) Matched fbdev as autoconfigured driver 4
[    24.732] (==) Matched vesa as autoconfigured driver 5
[    24.732] (==) Assigned the driver to the xf86ConfigLayout
[    24.732] (II) LoadModule: "nvidia"
[    24.733] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    24.734] (II) Module nvidia: vendor="NVIDIA Corporation"
[    24.734]    compiled for 1.6.99.901, module version = 1.0.0
[    24.734]    Module class: X.Org Video Driver
[    24.734] (II) LoadModule: "nouveau"
[    24.734] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    24.734] (II) Module nouveau: vendor="X.Org Foundation"
[    24.734]    compiled for 1.20.3, module version = 1.0.15
[    24.734]    Module class: X.Org Video Driver
[    24.734]    ABI class: X.Org Video Driver, version 24.0
[    24.734] (II) LoadModule: "nv"
[    24.735] (WW) Warning, couldn't open module nv
[    24.735] (EE) Failed to load module "nv" (module does not exist, 0)
[    24.735] (II) LoadModule: "modesetting"
[    24.735] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    24.735] (II) Module modesetting: vendor="X.Org Foundation"
[    24.735]    compiled for 1.20.3, module version = 1.20.3
[    24.735]    Module class: X.Org Video Driver
[    24.735]    ABI class: X.Org Video Driver, version 24.0
[    24.735] (II) LoadModule: "fbdev"
[    24.735] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[    24.735] (II) Module fbdev: vendor="X.Org Foundation"
[    24.735]    compiled for 1.20.3, module version = 0.5.0
[    24.735]    Module class: X.Org Video Driver
[    24.735]    ABI class: X.Org Video Driver, version 24.0
[    24.735] (II) LoadModule: "vesa"
[    24.735] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[    24.735] (II) Module vesa: vendor="X.Org Foundation"
[    24.735]    compiled for 1.20.3, module version = 2.4.0
[    24.735]    Module class: X.Org Video Driver
[    24.735]    ABI class: X.Org Video Driver, version 24.0
[    24.735] (II) NVIDIA dlloader X Driver  510.68.02  Wed Apr 20 21:10:16 UTC 2022
[    24.735] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    24.735] (II) NOUVEAU driver 
[    24.735] (II) NOUVEAU driver for NVIDIA chipset families :
[    24.735]    RIVA TNT        (NV04)
[    24.735]    RIVA TNT2       (NV05)
[    24.735]    GeForce 256     (NV10)
[    24.735]    GeForce 2       (NV11, NV15)
[    24.735]    GeForce 4MX     (NV17, NV18)
[    24.735]    GeForce 3       (NV20)
[    24.735]    GeForce 4Ti     (NV25, NV28)
[    24.735]    GeForce FX      (NV3x)
[    24.735]    GeForce 6       (NV4x)
[    24.735]    GeForce 7       (G7x)
[    24.735]    GeForce 8       (G8x)
[    24.735]    GeForce GTX 200 (NVA0)
[    24.735]    GeForce GTX 400 (NVC0)
[    24.735] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    24.735] (II) FBDEV: driver for framebuffer: fbdev
[    24.735] (II) VESA: driver for VESA chipsets: vesa
[    24.740] (II) Loading sub module "fb"
[    24.740] (II) LoadModule: "fb"
[    24.740] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    24.740] (II) Module fb: vendor="X.Org Foundation"
[    24.740]    compiled for 1.20.3, module version = 1.0.0
[    24.740]    ABI class: X.Org ANSI C Emulation, version 0.4
[    24.740] (II) Loading sub module "wfb"
[    24.740] (II) LoadModule: "wfb"
[    24.740] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    24.740] (II) Module wfb: vendor="X.Org Foundation"
[    24.740]    compiled for 1.20.3, module version = 1.0.0
[    24.740]    ABI class: X.Org ANSI C Emulation, version 0.4
[    24.740] (II) Loading sub module "ramdac"
[    24.740] (II) LoadModule: "ramdac"
[    24.740] (II) Module "ramdac" already built-in
[    24.772] (WW) Falling back to old probe method for modesetting
[    24.772] (WW) Falling back to old probe method for fbdev
[    24.772] (II) Loading sub module "fbdevhw"
[    24.772] (II) LoadModule: "fbdevhw"
[    24.773] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[    24.773] (II) Module fbdevhw: vendor="X.Org Foundation"
[    24.773]    compiled for 1.20.3, module version = 0.0.2
[    24.773]    ABI class: X.Org Video Driver, version 24.0
[    24.773] (II) NVIDIA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    24.773] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    24.773] (==) NVIDIA(0): RGB weight 888
[    24.773] (==) NVIDIA(0): Default visual is TrueColor
[    24.773] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    24.773] (**) NVIDIA(0): Enabling 2D acceleration
[    24.773] (II) Loading sub module "glxserver_nvidia"
[    24.773] (II) LoadModule: "glxserver_nvidia"
[    24.773] (II) Loading /usr/lib64/xorg/modules/extensions/libglxserver_nvidia.so
[    24.782] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    24.782]    compiled for 1.6.99.901, module version = 1.0.0
[    24.782]    Module class: X.Org Server Extension
[    24.782] (II) NVIDIA GLX Module  510.68.02  Wed Apr 20 21:06:55 UTC 2022
[    24.783] (II) NVIDIA: The X server supports PRIME Render Offload.

Alles anzeigen

papa_arrugada · 16. Mai 2022

Teil 2:

Code

[    25.559] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:11:0:0
[    25.559] (--) NVIDIA(0):     DFP-0
[    25.559] (--) NVIDIA(0):     DFP-1 (boot)
[    25.559] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GT 1030 (GP108-A) at PCI:11:0:0
[    25.559] (II) NVIDIA(0):     (GPU-0)
[    25.559] (--) NVIDIA(0): Memory: 2097152 kBytes
[    25.559] (--) NVIDIA(0): VideoBIOS: 86.08.0c.00.1a
[    25.559] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[    25.559] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    25.559] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    25.559] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[    25.559] (--) NVIDIA(GPU-0): 
[    25.603] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[    25.603] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[    25.603] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[    25.603] (--) NVIDIA(GPU-0): 
[    25.606] (==) NVIDIA(0): 
[    25.606] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    25.606] (==) NVIDIA(0):     will be used as the requested mode.
[    25.606] (==) NVIDIA(0): 
[    25.607] (II) NVIDIA(0): Validated MetaModes:
[    25.607] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select"
[    25.607] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    25.611] (--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X config
[    25.611] (--) NVIDIA(0):     option
[    25.611] (II) UnloadModule: "nouveau"
[    25.611] (II) Unloading nouveau
[    25.611] (II) UnloadModule: "modesetting"
[    25.611] (II) Unloading modesetting
[    25.611] (II) UnloadModule: "fbdev"
[    25.611] (II) Unloading fbdev
[    25.611] (II) UnloadSubModule: "fbdevhw"
[    25.611] (II) Unloading fbdevhw
[    25.611] (II) UnloadModule: "vesa"
[    25.611] (II) Unloading vesa
[    25.611] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[    25.611] (II) NVIDIA:     access.
[    25.613] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    25.613] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    25.613] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    25.613] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    25.613] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    25.613] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    25.613] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    25.613] (II) NVIDIA(0):     Config Options in the README.
[    25.624] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[    25.675] (==) NVIDIA(0): Disabling shared memory pixmaps
[    25.675] (==) NVIDIA(0): Backing store enabled
[    25.675] (==) NVIDIA(0): Silken mouse enabled
[    25.675] (==) NVIDIA(0): DPMS enabled
[    25.675] (II) Loading sub module "dri2"
[    25.675] (II) LoadModule: "dri2"
[    25.675] (II) Module "dri2" already built-in
[    25.675] (II) NVIDIA(0): [DRI2] Setup complete
[    25.675] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    25.675] (II) Initializing extension Generic Event Extension
[    25.675] (II) Initializing extension SHAPE
[    25.675] (II) Initializing extension MIT-SHM
[    25.675] (II) Initializing extension XInputExtension
[    25.675] (II) Initializing extension XTEST
[    25.676] (II) Initializing extension BIG-REQUESTS
[    25.676] (II) Initializing extension SYNC
[    25.676] (II) Initializing extension XKEYBOARD
[    25.676] (II) Initializing extension XC-MISC
[    25.676] (II) Initializing extension SECURITY
[    25.676] (II) Initializing extension XFIXES
[    25.676] (II) Initializing extension RENDER
[    25.676] (II) Initializing extension RANDR
[    25.677] (II) Initializing extension COMPOSITE
[    25.677] (II) Initializing extension DAMAGE
[    25.677] (II) Initializing extension MIT-SCREEN-SAVER
[    25.677] (II) Initializing extension DOUBLE-BUFFER
[    25.677] (II) Initializing extension RECORD
[    25.677] (II) Initializing extension DPMS
[    25.677] (II) Initializing extension Present
[    25.677] (II) Initializing extension DRI3
[    25.677] (II) Initializing extension X-Resource
[    25.677] (II) Initializing extension XVideo
[    25.678] (II) Initializing extension XVideo-MotionCompensation
[    25.678] (II) Initializing extension GLX
[    25.678] (II) Initializing extension GLX
[    25.678] (II) Indirect GLX disabled.
[    25.678] (II) GLX: Another vendor is already registered for screen 0
[    25.678] (II) Initializing extension XFree86-VidModeExtension
[    25.678] (II) Initializing extension XFree86-DGA
[    25.678] (II) Initializing extension XFree86-DRI
[    25.678] (II) Initializing extension DRI2
[    25.678] (II) Initializing extension NV-GLX
[    25.678] (II) Initializing extension NV-CONTROL
[    25.678] (II) Initializing extension XINERAMA
[    25.748] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    25.749] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.749] (**) Power Button: Applying InputClass "system-keyboard"
[    25.749] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.749] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.749] (II) LoadModule: "libinput"
[    25.749] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[    25.750] (II) Module libinput: vendor="X.Org Foundation"
[    25.750]    compiled for 1.20.3, module version = 0.28.1
[    25.750]    Module class: X.Org XInput Driver
[    25.750]    ABI class: X.Org XInput driver, version 24.1
[    25.750] (II) Using input driver 'libinput' for 'Power Button'
[    25.750] (**) Power Button: always reports core events
[    25.750] (**) Option "Device" "/dev/input/event1"
[    25.750] (**) Option "_source" "server/udev"
[    25.750] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    25.750] (II) event1  - Power Button: device is a keyboard
[    25.750] (II) event1  - Power Button: device removed
[    25.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    25.771] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    25.771] (**) Option "xkb_model" "pc105"
[    25.771] (**) Option "xkb_layout" "de"
[    25.771] (**) Option "xkb_variant" "nodeadkeys"
[    25.771] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"

Alles anzeigen

papa_arrugada · 16. Mai 2022

Teil 3:

Code

[    25.782] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    25.782] (II) event1  - Power Button: device is a keyboard
[    25.782] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    25.782] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.782] (**) Power Button: Applying InputClass "system-keyboard"
[    25.782] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.782] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    25.782] (II) Using input driver 'libinput' for 'Power Button'
[    25.782] (**) Power Button: always reports core events
[    25.782] (**) Option "Device" "/dev/input/event0"
[    25.782] (**) Option "_source" "server/udev"
[    25.783] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    25.783] (II) event0  - Power Button: device is a keyboard
[    25.783] (II) event0  - Power Button: device removed
[    25.799] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    25.799] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    25.799] (**) Option "xkb_model" "pc105"
[    25.799] (**) Option "xkb_layout" "de"
[    25.799] (**) Option "xkb_variant" "nodeadkeys"
[    25.799] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.799] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    25.799] (II) event0  - Power Button: device is a keyboard
[    25.800] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event2)
[    25.800] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev keyboard catchall"
[    25.800] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "system-keyboard"
[    25.800] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev keyboard catchall"
[    25.800] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "libinput keyboard catchall"
[    25.800] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse'
[    25.800] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events
[    25.800] (**) Option "Device" "/dev/input/event2"
[    25.800] (**) Option "_source" "server/udev"
[    25.801] (II) event2  - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Keyboard
[    25.801] (II) event2  - MOSART Semi. 2.4G Keyboard Mouse: device is a keyboard
[    25.801] (II) event2  - MOSART Semi. 2.4G Keyboard Mouse: device removed
[    25.823] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9:1.0/0003:062A:4101.0001/input/input2/event2"
[    25.823] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: KEYBOARD, id 8)
[    25.823] (**) Option "xkb_model" "pc105"
[    25.823] (**) Option "xkb_layout" "de"
[    25.823] (**) Option "xkb_variant" "nodeadkeys"
[    25.823] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.823] (II) event2  - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Keyboard
[    25.824] (II) event2  - MOSART Semi. 2.4G Keyboard Mouse: device is a keyboard
[    25.824] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event3)
[    25.824] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev pointer catchall"
[    25.824] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "evdev pointer catchall"
[    25.824] (**) MOSART Semi. 2.4G Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[    25.824] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse'
[    25.824] (**) MOSART Semi. 2.4G Keyboard Mouse: always reports core events
[    25.824] (**) Option "Device" "/dev/input/event3"
[    25.824] (**) Option "_source" "server/udev"
[    25.825] (II) event3  - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Mouse
[    25.825] (II) event3  - MOSART Semi. 2.4G Keyboard Mouse: device is a pointer
[    25.825] (II) event3  - MOSART Semi. 2.4G Keyboard Mouse: device removed
[    25.879] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9:1.1/0003:062A:4101.0002/input/input3/event3"
[    25.879] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse" (type: MOUSE, id 9)
[    25.879] (**) Option "AccelerationScheme" "none"
[    25.879] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) selected scheme none/0
[    25.879] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration factor: 2.000
[    25.879] (**) MOSART Semi. 2.4G Keyboard Mouse: (accel) acceleration threshold: 4
[    25.879] (II) event3  - MOSART Semi. 2.4G Keyboard Mouse: is tagged by udev as: Mouse
[    25.880] (II) event3  - MOSART Semi. 2.4G Keyboard Mouse: device is a pointer
[    25.880] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/mouse0)
[    25.880] (II) No input driver specified, ignoring this device.
[    25.880] (II) This device may have been added with another device file.
[    25.881] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse Consumer Control (/dev/input/event4)
[    25.881] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[    25.881] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "system-keyboard"
[    25.881] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[    25.881] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    25.881] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse Consumer Control'
[    25.881] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: always reports core events
[    25.881] (**) Option "Device" "/dev/input/event4"
[    25.881] (**) Option "_source" "server/udev"
[    25.881] (II) event4  - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is tagged by udev as: Keyboard
[    25.881] (II) event4  - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device is a keyboard
[    25.881] (II) event4  - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device removed
[    25.903] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse Consumer Control: needs a virtual subdevice
[    25.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9:1.1/0003:062A:4101.0002/input/input4/event4"
[    25.903] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse Consumer Control" (type: MOUSE, id 10)
[    25.903] (**) Option "AccelerationScheme" "none"
[    25.903] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) selected scheme none/0
[    25.903] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) acceleration factor: 2.000
[    25.903] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: (accel) acceleration threshold: 4
[    25.903] (II) event4  - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is tagged by udev as: Keyboard
[    25.903] (II) event4  - MOSART Semi. 2.4G Keyboard Mouse Consumer Control: device is a keyboard
[    25.904] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse System Control (/dev/input/event5)
[    25.904] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "evdev keyboard catchall"
[    25.904] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "system-keyboard"
[    25.904] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "evdev keyboard catchall"
[    25.904] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: Applying InputClass "libinput keyboard catchall"
[    25.904] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse System Control'
[    25.904] (**) MOSART Semi. 2.4G Keyboard Mouse System Control: always reports core events
[    25.904] (**) Option "Device" "/dev/input/event5"
[    25.904] (**) Option "_source" "server/udev"
[    25.905] (II) event5  - MOSART Semi. 2.4G Keyboard Mouse System Control: is tagged by udev as: Keyboard
[    25.905] (II) event5  - MOSART Semi. 2.4G Keyboard Mouse System Control: device is a keyboard
[    25.905] (II) event5  - MOSART Semi. 2.4G Keyboard Mouse System Control: device removed
[    25.931] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9:1.1/0003:062A:4101.0002/input/input5/event5"
[    25.931] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse System Control" (type: KEYBOARD, id 11)
[    25.931] (**) Option "xkb_model" "pc105"
[    25.931] (**) Option "xkb_layout" "de"
[    25.931] (**) Option "xkb_variant" "nodeadkeys"
[    25.931] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    25.931] (II) event5  - MOSART Semi. 2.4G Keyboard Mouse System Control: is tagged by udev as: Keyboard
[    25.931] (II) event5  - MOSART Semi. 2.4G Keyboard Mouse System Control: device is a keyboard
[    25.932] (II) config/udev: Adding input device MOSART Semi. 2.4G Keyboard Mouse (/dev/input/event6)
[    25.932] (II) No input driver specified, ignoring this device.
[    25.932] (II) This device may have been added with another device file.

Alles anzeigen

papa_arrugada · 16. Mai 2022

Teil 4:

Code

[    25.933] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[    25.933] (II) No input driver specified, ignoring this device.
[    25.933] (II) This device may have been added with another device file.
[    25.933] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[    25.933] (II) No input driver specified, ignoring this device.
[    25.933] (II) This device may have been added with another device file.
[    25.933] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[    25.933] (II) No input driver specified, ignoring this device.
[    25.933] (II) This device may have been added with another device file.
[    25.933] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event13)
[    25.933] (II) No input driver specified, ignoring this device.
[    25.933] (II) This device may have been added with another device file.
[    25.934] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[    25.934] (II) No input driver specified, ignoring this device.
[    25.934] (II) This device may have been added with another device file.
[    25.934] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event14)
[    25.934] (II) No input driver specified, ignoring this device.
[    25.934] (II) This device may have been added with another device file.
[    25.934] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event15)
[    25.934] (II) No input driver specified, ignoring this device.
[    25.934] (II) This device may have been added with another device file.
[    25.935] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event16)
[    25.935] (II) No input driver specified, ignoring this device.
[    25.935] (II) This device may have been added with another device file.
[    25.935] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event17)
[    25.935] (II) No input driver specified, ignoring this device.
[    25.935] (II) This device may have been added with another device file.
[    25.935] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event18)
[    25.935] (II) No input driver specified, ignoring this device.
[    25.935] (II) This device may have been added with another device file.
[    25.936] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event8)
[    25.936] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    25.936] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[    25.936] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    25.936] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    25.936] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    25.936] (**) Eee PC WMI hotkeys: always reports core events
[    25.936] (**) Option "Device" "/dev/input/event8"
[    25.936] (**) Option "_source" "server/udev"
[    25.936] (II) event8  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    25.936] (II) event8  - Eee PC WMI hotkeys: device is a keyboard
[    25.936] (II) event8  - Eee PC WMI hotkeys: device removed
[    26.003] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input8/event8"
[    26.003] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[    26.003] (**) Option "xkb_model" "pc105"
[    26.003] (**) Option "xkb_layout" "de"
[    26.003] (**) Option "xkb_variant" "nodeadkeys"
[    26.003] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    26.003] (II) event8  - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[    26.003] (II) event8  - Eee PC WMI hotkeys: device is a keyboard
[    26.004] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    26.004] (II) No input driver specified, ignoring this device.
[    26.004] (II) This device may have been added with another device file.
[    26.008] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[    26.008] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "system-keyboard"
[    26.008] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[    26.008] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[    26.008] (II) Using input driver 'libinput' for 'MOSART Semi. 2.4G Keyboard Mouse Consumer Control'
[    26.008] (**) MOSART Semi. 2.4G Keyboard Mouse Consumer Control: always reports core events
[    26.008] (**) Option "Device" "/dev/input/event4"
[    26.008] (**) Option "_source" "_driver/libinput"
[    26.008] (II) libinput: MOSART Semi. 2.4G Keyboard Mouse Consumer Control: is a virtual subdevice
[    26.008] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-9/1-9:1.1/0003:062A:4101.0002/input/input4/event4"
[    26.008] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Keyboard Mouse Consumer Control" (type: KEYBOARD, id 13)
[    26.008] (**) Option "xkb_model" "pc105"
[    26.008] (**) Option "xkb_layout" "de"
[    26.008] (**) Option "xkb_variant" "nodeadkeys"
[    26.008] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.167] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    27.167] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    27.167] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[    27.167] (--) NVIDIA(GPU-0): 
[    27.211] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[    27.211] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[    27.211] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[    27.211] (--) NVIDIA(GPU-0): 
[    27.341] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    27.341] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    27.341] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[    27.341] (--) NVIDIA(GPU-0): 
[    27.385] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[    27.385] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[    27.385] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[    27.385] (--) NVIDIA(GPU-0): 
[  3040.957] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  3040.957] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  3040.957] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  3040.957] (--) NVIDIA(GPU-0): 
[  3041.002] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  3041.002] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  3041.002] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  3041.002] (--) NVIDIA(GPU-0): 
[  5620.385] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  5620.385] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  5620.385] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  5620.385] (--) NVIDIA(GPU-0): 
[  5620.428] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  5620.428] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  5620.428] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  5620.428] (--) NVIDIA(GPU-0): 
[  6863.701] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  6863.701] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  6863.701] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  6863.701] (--) NVIDIA(GPU-0): 
[  6863.745] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  6863.745] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  6863.745] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  6863.745] (--) NVIDIA(GPU-0): 
[  7403.663] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  7403.663] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  7403.663] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  7403.663] (--) NVIDIA(GPU-0): 
[  7403.707] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): connected
[  7403.707] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): Internal TMDS
[  7403.707] (--) NVIDIA(GPU-0): Vestel 24W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[  7403.707] (--) NVIDIA(GPU-0):

Alles anzeigen

Sauerland · 16. Mai 2022

Solch lange Dateien besser in eine Textdatei speichern und als Anhang posten......

Poste mal:

Code

ls -al /etc/X11/xorg.conf.d/

papa_arrugada · 16. Mai 2022

ls -al /etc/X11/xorg.conf.d/

Code

drwxr-xr-x 2 root root 4096 16. Mai 11:45 .
drwxr-xr-x 7 root root 4096 16. Mai 11:38 ..
-rw-r--r-- 1 root root  440 16. Mai 11:45 00-keyboard.conf
-rw-r--r-- 1 root root 1099  5. Mai 2019  10-evdev.conf
-rw-r--r-- 1 root root  489 11. Apr 11:09 10-libvnc.conf
-rw-r--r-- 1 root root 1350 21. Mär 11:14 10-quirks.conf
-rw-r--r-- 1 root root  484  5. Mai 2019  11-evdev.conf
-rw-r--r-- 1 root root  975  5. Mai 2019  40-libinput.conf
-rw-r--r-- 1 root root  529  1. Jul 2011  50-device.conf
-rw-r--r-- 1 root root  199  5. Mai 2019  50-elotouch.conf
-rw-r--r-- 1 root root  264 21. Mär 11:14 50-extensions.conf
-rw-r--r-- 1 root root  527  1. Jul 2011  50-monitor.conf
-rw-r--r-- 1 root root  491  1. Jul 2011  50-screen.conf
-rw-r--r-- 1 root root 1913 27. Aug 2021  70-synaptics.conf
-rw-r--r-- 1 root root  115  6. Mär 2021  70-vmmouse.conf
-rw-r--r-- 1 root root 2747 28. Jan 2019  70-wacom.conf

Alles anzeigen

matbhm · 16. Mai 2022

Gegebenenfalls DPI in den Systemeinstellungen anpassen?

Riesige Darstellung nach NVIDIA Treiber auf Leap 15.3

Call for Proposals :: Open Source Summit Europe, 16.-18. September::Wien, Österreich

NVIDIA Treiber unter Tumbleweed installieren

Linux-Events: große & kleinere Tage u. events in Deutchland, Österreich und der Schweiz ... Erlanger Tage übermorgen...

neu von KDE: Amarok 3.0 - nach einigen Jahren wieder da

LaTex: Prozess endete mit Fehler(n)

vlim

BBPius

chris080

MichaRadius

A_Kueb

Teilen