Hallo alle,
Bin bei Linux schon seit vielen Jahren. Immer Suse und dann weiter mit open Suse. Habe kürzlich von Leap 15.1 auf 15.2 einen upgrade gemacht. Dabei ist mir die uralte Graphics Tablet (Aiptek) vor vielen Jahren als Lifetec bei Aldi gekauft, zerschossen worden.
Es hat viele Alrbeit gekostet es unter 15.1 zum laufen zu bringen. Erkannt wurde es als Graphire von der Firma Wacom.
Jetz wird es zwar als Aiptek erkannt, aber dann tut es sich nicht mehr. Also komplett unbrauchbar.
Habe alles mögliche versucht, aber es will weiterhin nicht funktionieren.
Ich benutze eine acer laptop mit Leap 15.2.
Ergebnis von lsusb :
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 005: ID 0bda:57b3 Realtek Semiconductor Corp. Acer 640 × 480 laptop camera
Bus 001 Device 004: ID 8087:0aa7 Intel Corp.
Bus 001 Device 007: ID 08ca:0010 Aiptek International, Inc. Tablet
Bus 001 Device 002: ID 0458:0185 KYE Systems Corp. (Mouse Systems)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsusb -d 08ca:0010 -v ergibt:
Bus 001 Device 007: ID 08ca:0010 Aiptek International, Inc. Tablet
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x08ca Aiptek International, Inc.
idProduct 0x0010 Tablet
bcdDevice 1.01
iManufacturer 1 (error)
iProduct 3 (error)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 32mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 30 Taiwan
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 399
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
Und wenn ich
udevadm monitor -kup --subsystem-match usb laufen lasse und meine Tablet einstecke:
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[1927.244185] add /devices/pci0000:00/0000:00:14.0/usb1/1-3 (usb)
ACTION=add
BUSNUM=001
DEVNAME=/dev/bus/usb/001/007
DEVNUM=007
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3
DEVTYPE=usb_device
MAJOR=189
MINOR=6
PRODUCT=8ca/10/101
SEQNUM=3396
SUBSYSTEM=usb
TYPE=0/0/0
KERNEL[1927.245345] add /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0 (usb)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0
DEVTYPE=usb_interface
INTERFACE=3/1/2
MODALIAS=usb:v08CAp0010d0101dc00dsc00dp00ic03isc01ip02in00
PRODUCT=8ca/10/101
SEQNUM=3397
SUBSYSTEM=usb
TYPE=0/0/0
UDEV [1930.295905] add /devices/pci0000:00/0000:00:14.0/usb1/1-3 (usb)
ACTION=add
BUSNUM=001
DEVNAME=/dev/bus/usb/001/007
DEVNUM=007
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3
DEVTYPE=usb_device
DRIVER=usb
ID_BUS=usb
ID_MODEL=USB_Tablet_Series_with_16_Hot_Keys
ID_MODEL_ENC=USB\x20Tablet\x20Series\x20with\x2016\x20Hot\x20Keys
ID_MODEL_FROM_DATABASE=Tablet
ID_MODEL_ID=0010
ID_REVISION=0101
ID_SERIAL=AIPTEK_International_Inc._USB_Tablet_Series_with_16_Hot_Keys
ID_USB_INTERFACES=:030102:
ID_VENDOR=AIPTEK_International_Inc.
ID_VENDOR_ENC=AIPTEK\x20International\x20Inc.
ID_VENDOR_FROM_DATABASE=Aiptek International, Inc.
ID_VENDOR_ID=08ca
MAJOR=189
MINOR=6
PRODUCT=8ca/10/101
SEQNUM=3396
SUBSYSTEM=usb
TYPE=0/0/0
USEC_INITIALIZED=1929772527
UDEV [1930.299800] add /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0 (usb)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0
DEVTYPE=usb_interface
DRIVER=aiptek
ID_MODEL_FROM_DATABASE=Tablet
ID_VENDOR_FROM_DATABASE=Aiptek International, Inc.
INTERFACE=3/1/2
MODALIAS=usb:v08CAp0010d0101dc00dsc00dp00ic03isc01ip02in00
PRODUCT=8ca/10/101
SEQNUM=3397
SUBSYSTEM=usb
TYPE=0/0/0
USEC_INITIALIZED=1930299329
dmesg | tail ergibt:
[ 91.143231] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 630.488893] BTRFS info (device sda3): qgroup scan completed (inconsistency flag cleared)
[ 1887.267417] usb 1-3: USB disconnect, device number 3
[ 1926.378260] usb 1-3: new low-speed USB device number 7 using xhci_hcd
[ 1926.534355] usb 1-3: New USB device found, idVendor=08ca, idProduct=0010, bcdDevice= 1.01
[ 1926.534361] usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1926.534365] usb 1-3: Product: USB Tablet Series with 16 Hot Keys
[ 1926.534367] usb 1-3: Manufacturer: AIPTEK International Inc.
[ 1929.052773] aiptek 1-3:1.0: Aiptek using 400 ms programming speed
[ 1929.052927] input: Aiptek as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input23
Weiss jetzt nicht mehr was ich noch tun kann. Es wird erkannt, aber irgendwie lässt es sich nicht ins system integrieren, nicht mal als früher als eine Wacom Graphire...
Irgend einen Rat?
Danke in voraus.