OpenSuse Leap Upgrade stoppt bei Retrieving: system-user-root-20190513-160099.3.2.noarch.rpm 99%

mpac · 8. Juli 2026

Bei mir bleibt das Upgrade per migration tool immer bei 99% stehen

Ich teste das Upgrade in einer VM. Der Dry Run läuft ohne Probleme. Zusätzliche Repo’s waren nur teamviewer, Vivaldi und ZSH. Auch deren Entfernen ist keine Lösung.

Sauerland · 8. Juli 2026

Du solltest aber schon sagen, das du versuchst auf Leap 16.1 upzudaten, welches noch eine Beta ist.....

mpac · 13. Juli 2026

Ja, aber das ist schon ein Teil des Troubleshootings um beide Optionen zu vergleichen

16.0 liefert die selbe Meldung

system-user-root-20190513-160000.2.2.noarch.rpm ...............................................................................<99%>=[| (139 B/s)]

Sauerland · 13. Juli 2026

Dann poste doch mal das /var/log/zypp/history hier als Anhang.

Festplatte Voll ist auch ein immer wiederkehrendes Problem.

mpac · 13. Juli 2026

Wieviel Platz braucht das Upgrade?

Filesystem Size Used Avail Use% Mounted on

/dev/sda2 28G 21G 6.0G 78% /

devtmpfs 4.0M 0 4.0M 0% /dev

tmpfs 3.9G 0 3.9G 0% /dev/shm

efivarfs 256K 29K 223K 12% /sys/firmware/efi/efivars

tmpfs 1.6G 9.6M 1.6G 1% /run

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-tmpfiles-setup-dev-early.service

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-sysctl.service

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-tmpfiles-setup-dev.service

/dev/sda2 28G 21G 6.0G 78% /.snapshots

/dev/sda2 28G 21G 6.0G 78% /boot/grub2/i386-pc

/dev/sda2 28G 21G 6.0G 78% /srv

/dev/sda2 28G 21G 6.0G 78% /home

/dev/sda2 28G 21G 6.0G 78% /usr/local

/dev/sda2 28G 21G 6.0G 78% /root

/dev/sda2 28G 21G 6.0G 78% /opt

/dev/sda2 28G 21G 6.0G 78% /tmp

/dev/sda2 28G 21G 6.0G 78% /var

/dev/sda2 28G 21G 6.0G 78% /boot/grub2/x86_64-efi

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-vconsole-setup.service

/dev/sda1 511M 6.3M 505M 2% /boot/efi

/dev/sdb1 20G 11G 7.8G 59% /mnt/sdb

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-tmpfiles-setup.service

tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service

tmpfs 795M 108K 795M 1% /run/user/1000

➜ ~

/var/log/zypp/history

2026-07-13 18:53:32|command|root@mpa-os15|'zypper' 'in' 'opensuse-migration-tool'|

2026-07-13 18:53:33|install|bc|1.07.1-11.37|x86_64||repo-oss|da4809c0e4aab1f534209285411b6474decef9a64569f9077040abcdc4fdb9689d8f0fc50436ad3a2e13307b0deb7ad3406d6923035b4a7c043b7ee6e8a6dddb|

2026-07-13 18:53:56|command|root@mpa-os15|'zypper' 'install' '-y' '--force-resolution' 'openSUSE-repos'|

# 2026-07-13 18:53:56 openSUSE-repos-Leap-20250604.94835c9-lp156.2.9.1.x86_64.rpm installed ok

# Additional rpm output:

# Content of repo-oss.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-oss.repo.rpmsave

# Content of repo-sle-debug-update.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-sle-debug-update.repo.rpmsave

# Content of repo-sle-update.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-sle-update.repo.rpmsave

# Content of repo-source.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-source.repo.rpmsave

# Content of repo-update.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-update.repo.rpmsave

# Content of repo-update-non-oss.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-update-non-oss.repo.rpmsave

# Content of repo-non-oss.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-non-oss.repo.rpmsave

# Content of repo-openh264.repo will be newly managed by zypp-services.

# Storing old copy as /etc/zypp/repos.d/repo-openh264.repo.rpmsave

#

# 2026-07-13 18:53:56 %posttrans(openSUSE-repos-Leap-20250604.94835c9-lp156.2.9.1.x86_64) script output:

# Adding service 'openSUSE'...

# Service 'openSUSE' has been successfully added.

#

# URI : dir:/usr/share/zypp/local/service/openSUSE

# Enabled : Yes

# Autorefresh : Yes

#

# Refreshing service 'openSUSE'.

2026-07-13 18:53:56|radd |openSUSE:repo-oss|http://cdn.opensuse.org/distribution/leap/15.6/repo/oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:repo-oss-debug|http://cdn.opensuse.org/debug/distribution/leap/15.6/repo/oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:repo-oss-source|http://cdn.opensuse.org/source/distribution/leap/15.6/repo/oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:repo-non-oss|http://cdn.opensuse.org/distribution/leap/15.6/repo/non-oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:repo-non-oss-debug|http://cdn.opensuse.org/debug/distribution/leap/15.6/repo/non-oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:repo-openh264|http://codecs.opensuse.org/openh264/openSUSE_Leap?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-oss|http://cdn.opensuse.org/update/leap/15.6/oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-oss-debug|http://cdn.opensuse.org/debug/update/leap/15.6/oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-non-oss|http://cdn.opensuse.org/update/leap/15.6/non-oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-non-oss-debug|http://cdn.opensuse.org/debug/update/leap/15.6/non-oss?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-backports|http://cdn.opensuse.org/update/leap/15.6/backports?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-backports-debug|http://cdn.opensuse.org/update/leap/15.6/backports_debug?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-sle|http://cdn.opensuse.org/update/leap/15.6/sle?mediahandler=curl2|

2026-07-13 18:53:56|radd |openSUSE:update-sle-debug|http://cdn.opensuse.org/debug/update/leap/15.6/sle?mediahandler=curl2|

# All services have been refreshed.

2026-07-13 18:54:08|radd |tmp-migration-tool-repo|https://download.opensuse.org/distribution/leap/16.0/repo/oss|

2026-07-13 18:54:38|command|root@mpa-os15|'zypper' 'install' '--repo' 'tmp-migration-tool-repo' '-y' '--force-resolution' '--from' 'tmp-migration-tool-repo' 'openSUSE-repos-Leap'|

# 2026-07-13 18:54:38 %posttrans(openSUSE-repos-Leap-20260218.3c95c01-lp160.1.1.x86_64) script output:

# Adding service 'openSUSE'...

# Service 'openSUSE' with URL 'dir:/usr/share/zypp/local/service/openSUSE' already exists. Just updating the settings.

# Service 'openSUSE' has been successfully added.

#

# URI : dir:/usr/share/zypp/local/service/openSUSE

# Enabled : Yes

# Autorefresh : Yes

#

# Refreshing service 'openSUSE'.

2026-07-13 18:54:38|rremove|openSUSE:update-backports|

2026-07-13 18:54:38|rremove|openSUSE:update-backports-debug|

2026-07-13 18:54:38|rremove|openSUSE:update-non-oss|

2026-07-13 18:54:38|rremove|openSUSE:update-non-oss-debug|

2026-07-13 18:54:38|rremove|openSUSE:update-oss|

2026-07-13 18:54:38|rremove|openSUSE:update-oss-debug|

2026-07-13 18:54:38|rremove|openSUSE:update-sle|

2026-07-13 18:54:38|rremove|openSUSE:update-sle-debug|

2026-07-13 18:54:38|rurl |http://cdn.opensuse.org/distribution/leap/15.6/repo/oss?mediahandler=curl2|http://cdn.opensuse.org/distribution/leap/15.6/repo/oss/x86_64|

2026-07-13 18:54:38|rurl |http://cdn.opensuse.org/debug/distribution/leap/15.6/repo/oss?mediahandler=curl2|http://cdn.opensuse.org/debug/distribution/leap/15.6/repo/oss/x86_64|

2026-07-13 18:54:38|rurl |http://cdn.opensuse.org/source/distribution/leap/15.6/repo/oss?mediahandler=curl2|http://cdn.opensuse.org/source/distribution/leap/15.6/repo/oss|

2026-07-13 18:54:38|rurl |http://cdn.opensuse.org/distribution/leap/15.6/repo/non-oss?mediahandler=curl2|http://cdn.opensuse.org/distribution/leap/15.6/repo/non-oss/x86_64|

2026-07-13 18:54:38|rurl |http://cdn.opensuse.org/debug/distribution/leap/15.6/repo/non-oss?mediahandler=curl2|http://cdn.opensuse.org/debug/distribution/leap/15.6/repo/non-oss/x86_64|

2026-07-13 18:54:38|rurl |http://codecs.opensuse.org/openh264/openSUSE_Leap?mediahandler=curl2|https://codecs.opensuse.org/openh264/openSUSE_Leap_16|

# All services have been refreshed.

2026-07-13 18:54:42|rremove|tmp-migration-tool-repo|

➜ ~

luigi · 14. Juli 2026

Zitat von mpac

2026-07-13 18:54:42|rremove|tmp-migration-tool-repo|
➜ ~

Der nächste Eintrag in der zypp/history auf einem bei mir am 05.04.2026 erfolgreich upgedateten Leap 15.6 lautet:

Code

2026-04-05 16:06:58|command|root@testbox|'zypper' '--releasever' '16.0' 'dup' '--force-resolution' '--allow-vendor-change' '--down load-in-advance'|

Danach kommt eine lange Liste der entfernten und neu installierten Pakete.

Mit dabei ist auch

Code

2026-04-05 16:07:35|install|system-user-root|20190513-160000.2.2|noarch||openSUSE:repo-oss|f254a48fc60baffcfe358fc082c46da91922f8fde8 95370bec423d1e876b9c676bdf3eba3154a5705e4f55954478fe1858e561164e646a4644c1d597c00fb989|

Ein paar Fragen:

0. Hast du mal den verfügbaren Speicherplatz durch Löschen überflüssiger Dateien vergößert?

1. Wie lange hast du gewartet, bevor du abgebrochen hast. Das kann nämlich eine ganze Weile dauern, bis es weitergeht!

2. Welche Internetverbindung war aktiv, Wlan oder Lan? Gibt es vielleicht Probleme mit IPv6?

3. Was passiert, wenn du den oben gezeigten zypper-Befehl (ohne die Hochkommas) in einer echten Konsole ohne grafische Oberfläche absetzt?

mpac · Mittwoch, 14:02

Das System läuft in einen Error, als wäre die Quelle nicht erreichbar:

Retrieving: system-user-root-20190513-160000.2.2.noarch (repo-oss (16.0)) (95/2785), 8.2 KiB

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm ............................................................................................[error (139 B/s)]

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm ...........................................................<65%>=================================[| (91 B/s)]

0. leerer kriege ich das System nicht

Filesystem Size Used Avail Use% Mounted on

/dev/sda2 28G 17G 11G 62% /

devtmpfs 4.0M 0 4.0M 0% /dev

tmpfs 3.9G 0 3.9G 0% /dev/shm

efivarfs 256K 29K 223K 12% /sys/firmware/efi/efivars

tmpfs 1.6G 9.6M 1.6G 1% /run

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-tmpfiles-setup-dev-early.service

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-sysctl.service

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-tmpfiles-setup-dev.service

/dev/sda2 28G 17G 11G 62% /.snapshots

/dev/sda2 28G 17G 11G 62% /boot/grub2/i386-pc

/dev/sda2 28G 17G 11G 62% /srv

/dev/sda2 28G 17G 11G 62% /home

/dev/sda2 28G 17G 11G 62% /usr/local

/dev/sda2 28G 17G 11G 62% /root

/dev/sda2 28G 17G 11G 62% /opt

/dev/sda2 28G 17G 11G 62% /tmp

/dev/sda2 28G 17G 11G 62% /var

/dev/sda2 28G 17G 11G 62% /boot/grub2/x86_64-efi

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-vconsole-setup.service

/dev/sda1 511M 6.3M 505M 2% /boot/efi

/dev/sdb1 20G 11G 7.8G 59% /mnt/sdb

tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-tmpfiles-setup.service

tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service

tmpfs 795M 108K 795M 1% /run/user/1000

1. Länger als 1 Tag

2. Ist ein LAN , IPv6 sollte eigentlich gar nicht verwendet werden

3. Runlevel 3 ?

Sauerland · Mittwoch, 14:59

Poste:

Code

zypper lr -d

und als root ausgeführt:

Code

grep -i releasever /etc/zypp/repos.d/*

mpac · Freitag, 15:46

➜ log zypper lr -d

--+--------------------------------------+-------------------------------+---------+-----------+---------+------+----------+--------+--------------------------------------------------------------------------------------+---------

1 | https-download.opensuse.org-16b21832 | openSUSE:Backports:SLE-15-SP4 | No | ---- | ---- | - | 99 | rpm-md | https://download.opensuse.org/…rts:/SLE-15-SP4/standard/ |

2 | openSUSE:repo-non-oss | repo-non-oss (15.6) | No | ---- | ---- | - | 99 | N/A | http://cdn.opensuse.org/distri…/15.6/repo/non-oss/x86_64 | openSUSE

3 | openSUSE:repo-non-oss-debug | repo-non-oss-debug (15.6) | No | ---- | ---- | - | 99 | N/A | http://cdn.opensuse.org/debug/…/15.6/repo/non-oss/x86_64 | openSUSE

4 | openSUSE:repo-openh264 | repo-openh264 (15.6) | Yes | (r ) Yes | Yes | - | 99 | rpm-md | https://codecs.opensuse.org/openh264/openSUSE_Leap_16 | openSUSE

5 | openSUSE:repo-oss | repo-oss (15.6) | Yes | (r ) Yes | Yes | - | 99 | rpm-md | http://cdn.opensuse.org/distri…leap/15.6/repo/oss/x86_64 | openSUSE

6 | openSUSE:repo-oss-debug | repo-oss-debug (15.6) | No | ---- | ---- | - | 99 | N/A | http://cdn.opensuse.org/debug/…leap/15.6/repo/oss/x86_64 | openSUSE

7 | openSUSE:repo-oss-source | repo-oss-source (15.6) | No | ---- | ---- | - | 99 | N/A | http://cdn.opensuse.org/source…bution/leap/15.6/repo/oss | openSUSE

➜ log

/etc/zypp/repos.d/openSUSE:repo-non-oss-debug.repo:name=repo-non-oss-debug (${releasever})

/etc/zypp/repos.d/openSUSE:repo-non-oss-debug.repo:baseurl=http://cdn.opensuse.org/debug/distribution/leap/${releasever}/repo/non-oss/$basearch

/etc/zypp/repos.d/openSUSE:repo-non-oss-debug.repo:gpgkey=http://cdn.opensuse.org/debug/distribution/leap/${releasever}/repo/non-oss/$basearch/repodata/repomd.xml.key

/etc/zypp/repos.d/openSUSE:repo-non-oss.repo:name=repo-non-oss (${releasever})

/etc/zypp/repos.d/openSUSE:repo-non-oss.repo:baseurl=http://cdn.opensuse.org/distribution/leap/${releasever}/repo/non-oss/$basearch

/etc/zypp/repos.d/openSUSE:repo-non-oss.repo:gpgkey=http://cdn.opensuse.org/distribution/leap/${releasever}/repo/non-oss/$basearch/repodata/repomd.xml.key

/etc/zypp/repos.d/openSUSE:repo-openh264.repo:name=repo-openh264 (${releasever})

/etc/zypp/repos.d/openSUSE:repo-oss-debug.repo:name=repo-oss-debug (${releasever})

/etc/zypp/repos.d/openSUSE:repo-oss-debug.repo:baseurl=http://cdn.opensuse.org/debug/distribution/leap/${releasever}/repo/oss/$basearch

/etc/zypp/repos.d/openSUSE:repo-oss-debug.repo:gpgkey=http://cdn.opensuse.org/debug/distribution/leap/${releasever}/repo/oss/$basearch/repodata/repomd.xml.key

/etc/zypp/repos.d/openSUSE:repo-oss.repo:name=repo-oss (${releasever})

/etc/zypp/repos.d/openSUSE:repo-oss.repo:baseurl=http://cdn.opensuse.org/distribution/leap/${releasever}/repo/oss/$basearch

/etc/zypp/repos.d/openSUSE:repo-oss.repo:gpgkey=http://cdn.opensuse.org/distribution/leap/${releasever}/repo/oss/$basearch/repodata/repomd.xml.key

/etc/zypp/repos.d/openSUSE:repo-oss-source.repo:name=repo-oss-source (${releasever})

/etc/zypp/repos.d/openSUSE:repo-oss-source.repo:baseurl=http://cdn.opensuse.org/source/distribution/leap/${releasever}/repo/oss

/etc/zypp/repos.d/openSUSE:repo-oss-source.repo:gpgkey=http://cdn.opensuse.org/source/distribution/leap/${releasever}/repo/oss/repodata/repomd.xml.key

/etc/zypp/repos.d/repo-non-oss.repo.rpmsave:baseurl=http://download.opensuse.org/distribution/leap/$releasever/repo/non-oss/

/etc/zypp/repos.d/repo-oss.repo.rpmsave:baseurl=http://download.opensuse.org/distribution/leap/$releasever/repo/oss/

/etc/zypp/repos.d/repo-sle-debug-update.repo.rpmsave:baseurl=http://download.opensuse.org/debug/update/leap/$releasever/sle/

/etc/zypp/repos.d/repo-sle-update.repo.rpmsave:baseurl=http://download.opensuse.org/update/leap/$releasever/sle/

/etc/zypp/repos.d/repo-source.repo.rpmsave:baseurl=http://download.opensuse.org/source/distribution/leap/$releasever/repo/oss/

/etc/zypp/repos.d/repo-update-non-oss.repo.rpmsave:baseurl=http://download.opensuse.org/update/leap/$releasever/non-oss/

/etc/zypp/repos.d/repo-update.repo.rpmsave:baseurl=http://download.opensuse.org/update/leap/$releasever/oss

Nach ca 2 Tagen:

Retrieving: system-user-root-20190513-160000.2.2.noarch (repo-oss (16.0)) (95/2785), 8.2 KiB

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm ............................................................................................[error (139 B/s)]

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm .............................................................................................[error (91 B/s)]

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm .............................................................................................[error (92 B/s)]

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm .............................................................................................[error (96 B/s)]

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm .............................................................................................[error (93 B/s)]

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm .............................................................................................[error (88 B/s)]

Retrieving: system-user-root-20190513-160000.2.2.noarch.rpm .............................................................................................[error (85 B/s)]

Failed to provide Package system-user-root-20190513-160000.2.2.noarch (repo-oss (16.0)). Do you want to retry retrieval?

[openSUSE:repo-oss|http://cdn.opensuse.org/distri…leap/16.0/repo/oss/x86_64] Can't provide file './../noarch/system-user-root-20190513-160000.2.2.noarch.rpm' from repository 'openSUSE:repo-oss'

History:

- Timeout exceeded when accessing 'http://cdn.opensuse.org/distribution/leap/16.0/repo/oss/noarch/system-user-root-20190513-160000.2.2.noarch.rpm'.

- Can't provide ./../noarch/system-user-root-20190513-160000.2.2.noarch.rpm

Sauerland · Freitag, 17:24

Was hast du für DNS:

Code

cat /etc/resolv.conf

OpenSuse Leap Upgrade stoppt bei Retrieving: system-user-root-20190513-160099.3.2.noarch.rpm 99%

Leap 16 Mischmasch aus Deutsch und Englisch

Audex CDDB Einstellung, lädt keine Cover

Collabora portiert Arch Linux für die Arm64-Plattform von Steam

OpenSuse Leap Upgrade stoppt bei Retrieving: system-user-root-20190513-160099.3.2.noarch.rpm 99%

“Half a Second”: Kostenloses E-Book arbeitet XZ-Backdoor auf

VenomVelvet

lariats

CWu

adimeymuc

mpac

Teilen

Tags