Hallo zusammen,
ich brauche dringend Eure Unterstützung...
Habe nach der ersten Installation von openSuse 13.2 das Problem, daß ich meine beiden DVD Laufwerke nicht auffinden und einbinden kann.
Die Befehlseingaben:
wodim --devices
wodim -scanbus
liefern folgende ERGEBNISSE:
Code
mick@linux-lbjk:~> wodim -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
Code
mick@linux-lbjk:~> wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
mick@linux-lbjk:~>
Zitat$ wodim --devices
"wodim: No such file or directory."
"Cannot open SCSI driver!"
diese verwirrende Meldung zeigt anscheinend das völlige Fehlen der Gerätedateien bzw. Gerätelinks
/dev/cdrom bzw. /dev/dvd...
===> Die Laufwerke sind jedoch definitiv da!!
Die Befehlseingabe:
/usr/sbin/hwinfo --scsi
liefert:
Code
mick@linux-lbjk:~> /usr/sbin/hwinfo --scsi
27: .........
28: SCSI 300.0: 10602 CD-ROM (DVD)
[Created at block.249]
Unique ID: KD9E.VWhdXaVxaiF
Parent ID: WL76.rwV8JTbQ6E2
SysFS ID: /class/block/sr0
SysFS BusID: 3:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ata4/host3/target3:0:0/3:0:0:0
Hardware Class: cdrom
Model: "MATSHITA DVD-ROM SR-8588"
Vendor: "MATSHITA"
Device: "DVD-ROM SR-8588"
Revision: "7Z14"
Driver: "pata_amd", "sr"
Driver Modules: "pata_amd"
Device File: /dev/sr0 (/dev/sg1)
Device Files: /dev/sr0, /dev/cdrom, /dev/disk/by-id/ata-MATSHITADVD-ROM_SR-8588, /dev/disk/by-id/scsi-SMATSHITA_DVD-ROM_SR-8588__...MATSHITADVD-ROM_SR-8588_7Z14PP_04/15/02, /dev/disk/by-path/pci-0000:00:09.0-ata-2.0, /dev/disk/by-path/pci-0000:00:09.0-scsi-3:0:0:0, /dev/dvd
Device Number: block 11:0 (char 21:1)
Features: DVD, MRW, MRW-W
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #16 (IDE interface)
Drive Speed: 48
29: SCSI 301.0: 10602 CD-ROM (DVD)
[Created at block.249]
Unique ID: nOPI.2vhJzF7KkvC
Parent ID: WL76.rwV8JTbQ6E2
SysFS ID: /class/block/sr1
SysFS BusID: 3:0:1:0
SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ata4/host3/target3:0:1/3:0:1:0
Hardware Class: cdrom
Model: "PIONEER DVD RW DVR-106D"
Vendor: "PIONEER"
Device: "DVD RW DVR-106D"
Revision: "1.07"
Driver: "pata_amd", "sr"
Driver Modules: "pata_amd"
Device File: /dev/sr1 (/dev/sg2)
Device Files: /dev/sr1, /dev/disk/by-id/ata-PIONEER_DVD_RW_DVR-106D_CGDL180098WL, /dev/disk/by-path/pci-0000:00:09.0-ata-2.1, /dev/disk/by-path/pci-0000:00:09.0-scsi-3:0:1:0
Device Number: block 11:1 (char 21:2)
Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, MRW, MRW-W
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #16 (IDE interface)
Drive Speed: 32
Alles anzeigen
Wie kann ich die notwendigen Gerätedateien bzw. Gerätelinks zu erzeugen, damit ich die Geräte mounten kann??
Viele Grüße