Okay, nach wie vor ist der "iwlwifi" aktiv:
Code
linux-m1yd:~ # hwinfo --wlan
11: PCI 200.0: 0282 WLAN controller
[Created at pci.386]
Unique ID: PL6s.f2491j44hr8
Parent ID: hoOk.jiG6PzALhq9
SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Intel Centrino Wireless-N 2230 BGN"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0887 "Centrino Wireless-N 2230"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x4062 "Centrino Wireless-N 2230 BGN"
Revision: 0xc4
Driver: "iwlwifi"
Driver Modules: "iwlwifi"
Device File: wlan1
Features: WLAN
Memory Range: 0xe0400000-0xe0401fff (rw,non-prefetchable)
IRQ: 29 (no events)
HW Address: 9e:b7:a9:b0:c9:95
Permanent HW Address: 60:36:dd:0a:5a:cd
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v00008086d00000887sv00008086sd00004062bc02sc80i00"
Driver Info #0:
Driver Status: iwlwifi is active
Driver Activation Cmd: "modprobe iwlwifi"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #7 (PCI bridge)
Alles anzeigen
Was muss ich machen, dass der "ipw2200"-Treiber genommen wird ??
PS: Habe wieder den aktuellsten Kernel-default geladen und alles upgedatet.