mein neuer Rechner zeigt die CPU temperatur nicht mehr an

rebell21 · 17. Januar 2024

ich habe Leap 15.5 neu auf einem AMD Ryzen 9 7950x installiert, aber das Widget / Miniprogramm zur Anzeige der CPU temperatur funktioniert nicht

der Dienst lm_services lässt sich nicht starten

Code

peter@localhost:~> sudo systemctl status lm_sensors.service

[sudo] Passwort für root: 
× lm_sensors.service - Initialize hardware monitoring sensors
     Loaded: loaded (/usr/lib/systemd/system/lm_sensors.service; enabled; vendor preset: disabled)
     Active: failed (Result: resources)


Jan 17 12:52:27 localhost systemd[1]: lm_sensors.service: Failed to load environment files: No such file or directory
Jan 17 12:52:27 localhost systemd[1]: lm_sensors.service: Failed to run 'start' task: No such file or directory
Jan 17 12:52:27 localhost systemd[1]: lm_sensors.service: Failed with result 'resources'.
Jan 17 12:52:27 localhost systemd[1]: Failed to start Initialize hardware monitoring sensors.

Alles anzeigen

sensors ist installiert

Code

peter@localhost:~> sudo zypper se sensors

Repository-Daten werden geladen...
Installierte Pakete werden gelesen...

S  | Name                                   | Summary                                                     | Type
---+----------------------------------------+-------------------------------------------------------------+------
   | ftsteutates-sensors                    | Sensors config ftsteutates                                  | Paket
   | libmate-sensors-applet-plugin0         | MATE Desktop sensors applet shared libraries                | Paket
   | libqt5-qtsensors-devel                 | Development files for the Qt 5 Sensors library              | Paket
   | libqt5-qtsensors-devel-32bit           | Development files for the Qt 5 Sensors library              | Paket
   | libqt5-qtsensors-examples              | Qt5 sensors Beispiele                                       | Paket
   | libqt5-qtsensors-private-headers-devel | Non-ABI stable experimental API for the Qt5 Sensors library | Paket
   | libQt5Sensors5                         | Qt 5 Sensors library                                        | Paket
   | libQt5Sensors5-32bit                   | Qt 5 Sensors library                                        | Paket
   | libQt5Sensors5-imports                 | QML imports for the Qt 5 Sensors library                    | Paket
   | libQt6Sensors6                         | Qt 6 Sensors library                                        | Paket
   | libQt6SensorsQuick6                    | Qt 6 SensorsQuick library                                   | Paket
i  | libsensors4                            | Hardware health monitoring library                          | Paket
   | libsensors4-32bit                      | Hardware health monitoring library                          | Paket
   | libsensors4-devel                      | Hardware health monitoring library                          | Paket
   | mate-applet-sensors                    | MATE Desktop panel applet to display sensor readings        | Paket
   | mate-applet-sensors-devel              | Development files for mate-sensors-applet                   | Paket
   | mate-applet-sensors-lang               | Translations for package mate-sensors-applet                | Paket
   | monitoring-plugins-sensors             | Check hardware status using lm_sensors                      | Paket
   | pcp-pmda-lmsensors                     | Performance Co-Pilot (PCP) metrics for hardware sensors     | Paket
   | qt6-sensors                            | Qt Sensors API to access sensor hardware                    | Paket
   | qt6-sensors-devel                      | Qt 6 Sensors library - Development files                    | Paket
   | qt6-sensors-docs-html                  | Documentation for qt6-sensors in HTML format                | Paket
   | qt6-sensors-docs-qch                   | Documentation for qt6-sensors in QCH format                 | Paket
   | qt6-sensors-examples                   | Examples for the qt6-sensors modules                        | Paket
   | qt6-sensors-imports                    | Qt 6 Sensors QML files and plugins                          | Paket
   | qt6-sensors-private-devel              | Non-ABI stable API for the Qt 6 Sensors library             | Paket
   | qt6-sensorsquick-devel                 | Qt 6 SensorsQuick library - Development files               | Paket
   | qt6-sensorsquick-private-devel         | Non-ABI stable API for the Qt 6 SensorsQuick library        | Paket
i+ | sensors                                | Hardware-Überwachung für Linux                              | Paket
   | slurm-plugin-ext-sensors-rrd           | SLURM ext_sensors/rrd Plugin (loadable shared objects)      | Paket
   | xfce4-sensors-plugin                   | Plugin für Hardware-Sensoren für die Xfce-Leiste            | Paket
   | xfce4-sensors-plugin-devel             | Entwicklungsdateien für die xfce4-sensors-plugin            | Paket
   | xfce4-sensors-plugin-lang              | Übersetzungen für das Paket xfce4-sensors-plugin            | Paket

Alles anzeigen

Alero · 17. Januar 2024

als root

Code

sensors-detect

Auch die letzte Zeile beachten ... immer mit y angeben

Auch beachten das der Dienst aktiviert ist unter

Code

yast -> Systemdienste (Runlevel)

Sauerland · 17. Januar 2024

Als root:

Code

sensors-detect

Und die Datei am Ende schreiben lassen.

Der systemd heißt dann:

Code

systemctl status sensord.service

rebell21 · 17. Januar 2024

sensors-detect

Code

localhost:~ # sensors-detect

# sensors-detect revision $Revision$
# System: Micro-Star International Co., Ltd. MS-7D75 [1.0]
# Board: Micro-Star International Co., Ltd. MAG B650 TOMAHAWK WIFI (MS-7D75)
# Kernel: 5.14.21-150500.55.39-default x86_64
# Processor: AMD Ryzen 9 7950X 16-Core Processor (25/97/2)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 17h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found unknown chip with ID 0xd592

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): YES
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): no

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): no
Sorry, no sensors were detected.
Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
https://hwmon.wiki.kernel.org/device_support_status for driver status.

Alles anzeigen

systemctl status sensord.service

Code

localhost:~ # systemctl status sensord.service

Unit sensord.service could not be found.

rebell21 · 17. Januar 2024

der Dienst lässt sich nicht aktivieren. Fehlermeldung

Code

peter@localhost:~> sudo systemctl status lm_sensors.service

[sudo] Passwort für root: 
× lm_sensors.service - Initialize hardware monitoring sensors
     Loaded: loaded (/usr/lib/systemd/system/lm_sensors.service; enabled; vendor preset: disabled)
     Active: failed (Result: resources)


Jan 17 12:52:27 localhost systemd[1]: lm_sensors.service: Failed to load environment files: No such file or directory
Jan 17 12:52:27 localhost systemd[1]: lm_sensors.service: Failed to run 'start' task: No such file or directory
Jan 17 12:52:27 localhost systemd[1]: lm_sensors.service: Failed with result 'resources'.
Jan 17 12:52:27 localhost systemd[1]: Failed to start Initialize hardware monitoring sensors.

Alles anzeigen

rebell21 · 17. Januar 2024

ist die AM5 Plattform . Geht sensors da ?

Sauerland · 17. Januar 2024

Lesen:

Code

Either your system has no sensors, or they are not supported, or
they are connected to an I2C or SMBus adapter that is not
supported. If you find out what chips are on your board, check
https://hwmon.wiki.kernel.org/device_support_status for driver status.

rebell21 · 17. Januar 2024

ich habe einen Sensorchip

Code

nct6687d

mit

Code

~$ git clone https://github.com/Fred78290/nct6687d
~$ cd nct6687d
~$ make dkms/install

konnte ich eine Anzeige erzeugen

sensors

Code

localhost:~/nct6687d # sensors

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +91.2°C  
Tccd1:        +88.2°C  
Tccd2:        +91.0°C  

nvme-pci-0100
Adapter: PCI adapter
Composite:    +29.9°C  (low  = -273.1°C, high = +81.8°C)
                       (crit = +84.8°C)
Sensor 1:     +29.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +32.9°C  (low  = -273.1°C, high = +65261.8°C)

nct6687-isa-0a20
Adapter: ISA adapter
+12V:          +12.10 V  (min = +12.07 V, max = +12.10 V)
+5V:            +5.08 V  (min =  +5.08 V, max =  +5.09 V)
+3.3V:          +3.37 V  (min =  +0.00 V, max =  +3.38 V)
CPU Soc:        +0.96 V  (min =  +0.95 V, max =  +0.96 V)
CPU Vcore:      +1.27 V  (min =  +0.79 V, max =  +1.30 V)
CPU 1P8:        +0.00 V  (min =  +0.00 V, max =  +0.00 V)
CPU VDDP:       +0.00 V  (min =  +0.00 V, max =  +0.00 V)
DRAM:           +1.10 V  (min =  +1.10 V, max =  +1.10 V)
Chipset:        +0.23 V  (min =  +0.17 V, max =  +0.23 V)
CPU SA:         +0.91 V  (min =  +0.91 V, max =  +0.95 V)
Voltage #2:     +1.53 V  (min =  +1.53 V, max =  +1.54 V)
AVCC3:          +3.33 V  (min =  +3.33 V, max =  +3.34 V)
AVSB:           +3.37 V  (min =  +0.00 V, max =  +3.38 V)
VBat:           +2.05 V  (min =  +0.00 V, max =  +2.05 V)
CPU Fan:       1168 RPM  (min =  513 RPM, max = 1168 RPM)
Pump Fan:         0 RPM  (min =    0 RPM, max =    0 RPM)
System Fan #1:    0 RPM  (min =    0 RPM, max =    0 RPM)
System Fan #2:    0 RPM  (min =    0 RPM, max =    0 RPM)
System Fan #3:    0 RPM  (min =    0 RPM, max =    0 RPM)
System Fan #4:    0 RPM  (min =    0 RPM, max =    0 RPM)
System Fan #5:    0 RPM  (min =    0 RPM, max =    0 RPM)
System Fan #6:    0 RPM  (min =    0 RPM, max =    0 RPM)
CPU:            +91.0°C  (low  = +34.0°C, high = +91.0°C)
System:         +33.0°C  (low  = +29.5°C, high = +33.0°C)
VRM MOS:        +48.5°C  (low  = +28.5°C, high = +48.5°C)
PCH:            +31.0°C  (low  = +28.5°C, high = +31.0°C)
CPU Socket:     +53.5°C  (low  = +25.0°C, high = +53.5°C)
PCIe x1:        +91.5°C  (low  = +87.0°C, high = +96.5°C)
M2_1:            +0.0°C  (low  =  +0.0°C, high =  +0.0°C)

amdgpu-pci-0f00
Adapter: PCI adapter
vddgfx:       +1.25 V  
vddnb:        +0.94 V  
edge:         +51.0°C  
PPT:          47.01 W

Alles anzeigen

ich lasse gerade die phoronix test suite lauifen, die CPU ist mit allen cores auf 100 %. Daher ist die Temperatur soc hoch

rebell21 · 17. Januar 2024

ich weiß aber nicht genau was

Tctl

Tccd1

Tccd2

Code

k10temp-pci-00c3
Adapter: PCI adapter
Tctl:         +91.2°C  
Tccd1:        +88.2°C  
Tccd2:        +91.0°C

bedeuten. Wisst Ihr das

Sauerland · 17. Januar 2024

dann lass jetzt noch mal sensors-detect laufen.

Dann als root:

Code

zypper in sensord

Code

systemctl status sensord.service

mein neuer Rechner zeigt die CPU temperatur nicht mehr an

Tastaturabfrage unter C

Taskleiste startet nicht

Proxmox VE 8.2 hilft mit Assistent beim Umzug von VMware

Probleme mit dem Ausdruck von pdf-Dateien über Okular

USB WLAN Sticks für Opensuse?

MichaRadius

A_Kueb

Kukulkan

vpn

Nidrnox

Teilen

Tags