So habe jetzt "nomodeset" im Bootloader permanent hinzugefügt.
Und auch ein mkinitrd.
Bash
MM-Home:/home/marc # mkinitrd
Creating initrd: /boot/initrd-4.1.15-8-default
Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-4.1.15-8-default 4.1.15-8-default
dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
*** Including module: bash ***
*** Including module: warpclock ***
*** Including module: i18n ***
*** Including module: ifcfg ***
*** Including module: drm ***
*** Including module: plymouth ***
*** Including module: btrfs ***
*** Including module: kernel-modules ***
Omitting driver i2o_scsi
*** Including module: resume ***
*** Including module: rootfs-block ***
*** Including module: terminfo ***
*** Including module: udev-rules ***
Skipping udev rule: 91-permissions.rules
Skipping udev rule: 80-drivers-modprobe.rules
*** Including module: haveged ***
*** Including module: systemd ***
*** Including module: usrmount ***
*** Including module: base ***
*** Including module: fs-lib ***
*** Including module: shutdown ***
*** Including module: suse ***
*** Including modules done ***
*** Installing kernel module dependencies and firmware ***
*** Installing kernel module dependencies and firmware done ***
*** Resolving executable dependencies ***
*** Resolving executable dependencies done***
*** Hardlinking files ***
*** Hardlinking files done ***
*** Stripping files ***
*** Stripping files done ***
*** Generating early-microcode cpio image ***
*** Constructing GenuineIntel.bin ****
*** Store current command line parameters ***
Stored kernel commandline:
resume=UUID=902a6fbb-794e-4c5b-ba9d-67211720bad2
root=UUID=21024970-7a27-4114-8525-d8dd026f23b6 rootflags=rw,relatime,space_cache,subvolid=259,subvol=/@/.snapshots/1/snapshot rootfstype=btrfs
*** Creating image file ***
*** Creating image file done ***
Some kernel modules could not be included
This is not necessarily an error:
swap
Update bootloader...
Habe ebenfalls mal die Temperatur überprüft da ist aber alles in Ordnung:
Code
MM-Home:/home/marc # sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +27.8°C (crit = +99.0°C)
temp2: +29.8°C (crit = +99.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +33.0°C (high = +80.0°C, crit = +98.0°C)
Core 0: +28.0°C (high = +80.0°C, crit = +98.0°C)
Core 1: +33.0°C (high = +80.0°C, crit = +98.0°C)
Core 2: +33.0°C (high = +80.0°C, crit = +98.0°C)
Core 3: +28.0°C (high = +80.0°C, crit = +98.0°C)Habe auch die SysRQ Shortcuts aktiviert, vielleicht helfen die mir ja weiter wenn das System wieder hängen bleibt.
Werde Morgen auch mal noch meine RAM testen, nur um sicher zu gehen aber das kann fast nicht sein das es daran liegt.
Könnte das Problem auch durch eine falsche Einstellung im Bios kommen?
