Hallo zusammen,
ich habe opensuse 11.4 64-bit installiert, Datensicherung soll über USB 3.0 auf eine externe Festplatte erfolgen. Platte ist eine Samsung HJ 103 in einer Icy-Box mit Chipsatz ASMedia 2105.
Die Box ist mit einer USB 3.0 Schnittstelle ausgerüstet und mit einem 3er Kabel an eienr USB 3.0-Schnittstelle am Motherboard (Asus M88TD-V Evo/USB 3.0)angeschlossen.
Die Box wird beim Einstecken erkannt und gemountet, läuft allerdings nur mit USB 2.0
"lsusb" gibt folgendes aus:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 174c:5106 ASMedia Technology Inc.
Bus 001 Device 005: ID 0409:0050 NEC Corp.
Bus 005 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0
Bus 004 Device 002: ID 0d46:3010 Kobil Systems GmbH
Bus 004 Device 003: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port
Bus 001 Device 006: ID 1b1c:1a90
Bus 001 Device 007: ID 1b1c:1a90
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 046d:c049 Logitech, Inc. G5 Laser Mouse
Ich würde logischerwiese gerne USB 3.0 nutzen, damti die Dasi deutlich schneller geht.
Hat jemand eine Idee, was ich machen kann?
Danke im voraus!
Gruss
Thomas